Capillary

Capillary ferrules are packaged in dial packs which deliver one ferrule at a time, keeping the others clean and ready for use. The dial packaging has been tested to ensure no out gassing of contaminants, including phthalates. *These ferrules are recommended for use with Agilent GC/MS…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

F2 Standard Integrated Capillary (standard fitting with + nebulizers). F2 Standard integrated capillary for self-aspiration or pumping. Includes 0. 5 mm i.d. (orange marker) 70 cm long capillary.

700 µL/min self-aspirating sample capillary for ST nebulizer. 0.80 mm i.d., blue marker

SUPPORT-9000 CAPILLARY COL

Microscale bent capillary gas delivery tube for transferring gases generated during reactions to storage containers, such as 9588 Sampling Reservoir. With inner joint.

Designed for use in ASTM D-2273 and ASTM D-2709, this borosilicate glass capillary tipped long form centrifuge tube is 200mm in length.

This long form 100mL capacity oil centrifuge tube has a capillary tip that makes it ideal for use when only small amounts of solids are present. Made of borosilicate glass, its approximate widest O.D. is 38mm and approximate length is 200mm. Reference No. ASTM D 2709

Wilmad’s WG-1364 series capillary tubes are sealed at one end and provide a low cost solution for small volume NMR measurement. Made of ASTM Type 1 Class A glass Tested at 400 MHz field

Solvent rinsing removes many contaminants that accumulate in columns. The contaminants are removed by passing solvents through the column. Only bonded and cross-linked phase columns should be rinsed, or permanent damage to the column will result. This product is only available to U.S. Domestic…

200 µL/min self-aspirating sample capillary for ST nebulizer. 0.30 mm i.d., yellow marker

Agilent starter kits contain the most often used capillaries and fittings. We included our genuine flexible stainless steel capillaries to make the best connection in your LC system, no matter the brand. The kits are for use with 3-4 or 1-2 mm ID columns, as well as for Micro LC columns. The free…

Squarely cut, pre-cleaned and ready to use Use with stainless steel fittings and ferrules or PEEK fittings This product is only available to U.S. Domestic Customers. Agilent Technologies products are intended for sale/shipment within the US only. International customers should…

Length measured from top of joint to tip. Hose connection is size A.

Capillary Storage Solution, 100mL This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Recommended application: Preparation of capillary columns As precolumns, whenever a larger contamination capacity is required Different deactivations are available: Methyl-Sil deactivated Phenyl-Sil deactivated CW deactivated

PFA sample capillary 0. 062 o. d. x 0. 020 i. d. in (1. 59mm x 0. 5mm)60cm length. For use with P/N WE024372 connector.

Permanently label capillary columns. •Soft enough to imprint with a ball-point pen •Big enough for all necessary information •Lightweight and will not damage column

OPTIMA® 17-TG GC capillary columns for triglyceride analyses Features Phenyl-methyl-polysiloxane (50 % phenyl) · USP G3 Offers separation according to degree of unsaturation Short capillary columns (max. 25 m and 0.32 mm ID) with low-bleeding stationary phases …

Non-calibrated tubes made from borosilicate glass for use with aqueous and organic solutions. Packed in half pound packages. Tubes are 1.0-1.1mm OD x .66-.70mm ID.

100% Plastic microhematocrit capillary tubes Plain untreated Globe Scientific's plastic micro hematocrit capillary tubes are completely unbreakable. They eliminate the risk of injury and contamination associated with glass tubes due to breakage. The tubes are packaged 100 per vial, 10…

Borosilicate glass replacement capillary tubes contain samples to be analyzed in the Digital Mel-Temp 3.0 melting point apparatus. Borosilicate glass is chemically inert and resists temperature changes. The tubes come in a package of 100.

OPTIMA® 1-TG GC capillary columns for triglyceride analyses Features 100 % dimethylpolysiloxane · USP G1 / G2 / G38 offers separation according to carbon number Short capillary columns (max. 25 m and 0.32 mm ID) with low-bleeding stationary phases thermally stable…

Kit Includes: Gold plated seal kit, includes washer Replacement for 18740-20885, 3 each Liner, split, straight, glass wool, non-deactivated, 4 each Liner, splitless, single-taper, glass wool, deactivated, 2 each Non-Stick Fluorocarbon O-ring, 10/pk Liner, direct, 2mm ID,…

…optimal choice for problem liquids! Capillary Pistons are designed, developed, and manufactured to fit Gilson MICROMAN perfectly. They ensure optimal performance of your MICROMAN pipette across the full volume range. Disposable CPs with capillaries made of pure polypropylene. Free of…

These FUNGILAB glass capillary viscometers allow to determine viscosities using ASTM and DIN testing methods. All capillary viscometers are supplied with the cali- bration certificate issued in accordance with the conditions of accreditation granted by a National Metrological Register which has…

OPTIMA® 210 Capillary columns for GC Features Trifluoropropyl-methylpolysiloxane (50 % trifluoropropyl) USP G6 Medium polar phase Recommended for environmental analyses, especially for o-, m- and p-substituted aromatic hydrocarbons Similar phases: OV-210, DB-210,…

OPTIMA® 240 Capillary columns for GC Features 33 % cyanopropyl-methyl – 67 % dimethylpolysiloxane Medium polar phase Recommended for FAMEs, dioxins No similar phases Max. temperature for isothermal operation 260 °C Max. temperature for short isotherms in a…

PERMABOND® P-100 GC capillary column for analysis of petrochemical products Features Extra long column with nonpolar dimethylpoly­siloxane phase USP G1 / G2 / G38 high resolution and sufficient capacity for analysis of complex mixtures of hydrocarbons Max. temperature…

OPTIMA® FFAPplus Capillary columns for GC Features Polyethylene glycol 2-nitroterephthalate USP G35 Polar phase with optimized crosslinking for lower column bleeding Recommended application: FAMEs, free carboxylic acids Similar phases: DB-FFAP, HP-FFAP, CP-Wax 58 (FFAP)…