Compare Tool

Select up to 3 products

1 - 32 of 724

  • Rolling Cabinet


    Rolling cabinet for use with Eppendorf Centrifuge 5804/5804R and 5810/5810R. With 4 casters (2 lockable) and drawer to hold rotors and adapters.

  • Cabinet Fillers

    INSTOCK Labs

    Corner Fillers are used to close the gap between two cabinets in a corner. Adjustable fillers can be cut to fit and include a slip fit trim angle. Front Fillers are used between adjacent base cabinets of between a cabinet and the wall.<

  • Lockout Cabinet

    National Marker (NMC)

    16" x 15" with 5-1/2" deep, adjustable shelving Available with or without supplies 1215U29 (1) Cabinet only 1215U30 (1) Cabinet (6) Padlocks (1) 10/pack LOTAG10 tags with fasteners (1) 1" hasp (1) 1-1/2" hasp (1) Large electrical plug lockout (1)…


    Brady Worldwide

  • EconaCab™ Acid Cabinet


    All cabinets are constructed of 1 inch exterior grade plywood Finished with easily identified, chemical resistant paint Individual cabinets may be placed under your work surface with a 32-1/4" clearance Designed as a stand alone or stacked up to two units high Cabinets have a liquid…

  • Bench Corrosive Cabinet


    …or corrosion Constructed of 1" multi-ply, exterior-grade plywood Sized for convenient storage of corrosive chemicals on your laboratory bench Painted with multiple coats of chemical-resistant paint Cabinet floor constructed as a 2" liquid-tight trough for containment of spills

  • Boekel Slide Storage Cabinet


    …roll steel construction with baked-on epoxy finish Supplied with sponge block spacers and ID labels Cabinets are stacked by built-in tabs in the bottom of each unit. Cabinets will not be stable if placed on benchtop without use of cabinet base. Do not stack cabinets without use of cabinet base.

  • Photochemical Safety Reaction Cabinet

    Ace Glass

    Steel cabinet for safe operation of Photochemical Reaction Equipment. Cabinet has welded seams, fully hinged door with lip to prevent light from escaping. Door has key lock and controls a safety switch that prevents lamp operation unless door is closed. Sealed floor to 1" height to contain any…

  • Rear Wall Cabinet

    INSTOCK Labs

    Rear Wall Cabinet Fillers are used to close the space between the rear of the wall cabinet and wall created by the hanging rail. The filled is only needed when the end of the cabinet is exposed.

  • C-65 Darkroom Cabinet

    Analytik Jena

    Durable lightweight plastic Accommodates one or two 8-watt lamps Internal white light Removable bottom panel allows cabinet to be placed over transilluminator or samples.

  • Vacuum Desiccator Cabinet


    The Vacuum Desiccator is a molded polyethylene cabinet having one cubic foot of interior space that provides a low humidity environment for the storage of anhydrous, hygroscopic biological and chemical compounds. Features a leak-resistant chemical-resistant gasket for an excellent seal. A 3-way…

  • Sitting Height Base Cabinet

    INSTOCK Labs

    Sitting Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.

  • Sound Abatement Cabinet

    Ace Glass

    The sound abatement cabinet permits extended processing without discomfort by greatly reducing high pitched noise that is produced in ultrasonic processing by harmonics emanating from the vessel walls and the fluid surface. The inside of the cabinet is lined with sound abating foam. One hole at top…

  • Mini Stak-a-Cab™ Flammables Cabinet


    …safe compatible organization of your laboratory chemicals Cabinet floor constructed as a 2″ liquid tight trough meeting the OSHA requirement for secondary containment Cabinet supplied with internal metal lock All cabinets constructed to meet or exceed all applicable NFPA and OSHA…

  • Mobile Cabinet Work Surfaces

    INSTOCK Labs

    Mobile Cabinet Work Surface is 3/4" thick black phenolic resin that provides a 1" overhang on the front and a 1/2" overhang at the rear and sides. It adds 3/4" to the over all height of the cabinet. There is a grip notch inc

  • Biological Safety Cabinet

    Air Science USA, LLC

    …Biological Safety Cabinet provides a safe laboratory workspace using optimum airflow design combined with an integrated HEPA filtration system. Room air is drawn in through the intake grille on the front of the unit, then under the work surface and directed to the top of the cabinet where it passes…

  • Cabinet Base Molding

    INSTOCK Labs

    Cabinet base molding is installed directly on the toe-kick of a base cabinet and is the final step in installing a lab to create a finished look. The base molding has a self-adhesive back for easy application.

  • Cabinet with Pull-Out Shelves

    Sandusky Cabinets

    Five tray design shelves with 1-3/4" side/back lip and 5/8" front lip conveniently pull-out on full extension ball-bearing slides. Shelves hold to 200 lbs. each and have built in interlock system to prevent more than one shelf from op

  • Stainless Steel Storage Cabinet

    Sandusky Cabinets

    Durable 18-gauge, type 304 stainless steel construction. Four adjustable shelves on 2" increments plus bottom shelf. Shelves support up to 400 lbs. each. Full length piano hinges on doors

  • Spill Control Cabinet 19-7/8x14-1/4x32-3/4

    Brady Worldwide

  • Industrial Metal Storage Cabinet


    Attractive enough for the office; tough enough for the warehouse. Heavy-gauge steel construction Locking doors Adjustable shelves have 150 lb. capacity each 24" deep for extra storage space

  • Cabinet Top Polyethylene Tray


    These polyethylene accessories with a slightly curved edge provide additional protection against leaks and spills. Fits 17-gallon Piggyback and all 2-door 30,40 and 45-gallon cabinets.

  • Dry-Keeper™ Stacking Desiccator Cabinet

    Bel-Art - SP Scienceware

    …dry storage needs in this desiccator cabinet that stacks up to 5 units high. Smoke-tinted, polystyrene Two removable shelves can be set at four heights Pull down door slides out of the way into a compartment located underneath the cabinet Includes small desiccant tray and desiccant

  • Beta Storage Cabinet


    Product Dimensions (l x w x h) : 12x30x24in Locking beta storage cabinet is available with four adjustable shelves allowing for secure storage of your beta samples. Cabinet features space saver design to fit nicely on most bench tops. Shelves are sized to accommodate racks, bottles, boxes,…

  • UVT-S-AR PCR UV Cabinet

    Grant Instruments

    …Grant bio UVT-S-AR is a large capacity stainless steel PCR UV cabinet workstation with additional space for equipment and accessories to allow for more comfortable and convenient working in PCR applications. These UVT-S-AR cabinets are equipped with an open UV lamp installed in the upper part…

  • UVC/T-M-AR PCR UV Cabinet

    Grant Instruments

    The Grant bio UVC/T-M-AR is an efficient general purpose stainless steel PCR UV cabinet workstation for carrying out short-term procedures. The UVC/T-M-AR cabinets are equipped with an open UV lamp installed in the upper part of the hood. UV-radiation from these lamps effectively disinfects the…

  • Constant Temperature Air Cabinet


    Provides a constant temperature environment and regulated air pressure per ASTM specifications. Consists of an insulated airtight cabinet with pressure system to accommodate four pressure bleeding test cells. Equipped with electric heater, solid state controller, cooling coil and circulating fan for…

  • UV cabinet UVT-B-AR

    Grant Instruments

    …Grant bio UVT-B-AR is an economical general purpose PCR UV cabinet in for carrying out short-term procedures. It is an economic model with stainless steel work surface, metal framework and shock proof glass panels. The UVT-B-AR cabinets are equipped with an open UV lamp installed in the upper…

  • HPLC 30-Column Storage Cabinet


    Tired of stacks of HPLC columns on your lab benches? This easy-to-install cabinet saves space and protects columns; the hinged door is clear to allow quick identification of column labels or tags. Saves space and protects columns* Hinged door is clear for quick identification of column…

  • Dry-Keeper™ Vertical Desiccator Cabinet

    Bel-Art - SP Scienceware

    Clear and durable PVC desiccator cabinet has sleek black ABS accents, vertical profile, and movable shelves for adjusting dry storage space configuration for moisture-sensitive materials. Generous 2 cu. ft. interior volume Three adjustable, removable, and perforated shelves facilitate…

  • Fluorescence Analysis Cabinet


    The CX-20 UV viewing cabinet delivers standard and high UV intensities assuring maximum UV irradiance, fluorescent contrast and peak efficiency. Designed for use with our Spectroline transilluminators, a removable bottom panel allows for additional transillumination source. The flexible, contoured…

  • Overhead “Flipper Door” Cabinet


    Overhead “flipper door” cabinet, Thomas No. 1200G83, 30" wide Overhead “flipper door” cabinet, Thomas No. 1200G84, 36" wide

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.