Autoclavable Carboys

…accuracy, and the carboy size and material are molded into the side for easy identification. The 120 mm EZfil™ neck is available on 20L and 40L carboys, for easier filling and cleaning. VersaCaps™, VersaBarbs™, and spigots are autoclavable. The recommended autoclaving cycle is…

…the carboy size and material are molded into the side for easy identification. The 120 mm EZfil™ neck is available on 20L and 40L carboys, for easier filling and cleaning. EZgrip® Polypropylene Carboys, VersaCaps™, VersaBarbs™, and spigots are autoclavable. The recommended…

…accuracy, and the carboy size and material are molded into the side for easy identification. The 120 mm EZfil™ neck is available on 20L and 40L carboys, for easier filling and cleaning. VersaCaps™, VersaBarbs™, and spigots are autoclavable. The recommended autoclaving cycle is…

…and the carboy size and material are molded into the side for easy identification. The 120 mm EZfil™ neck is available on 20 L and 40 L carboys, for easier filling and cleaning. VersaCaps™, VersaBarbs™, and spigots are autoclavable. The recommended autoclaving cycle is…

…allows the user to reach inside the carboy for easier cleaning. Carboy material and volume are clearly imprinted on the outside of the bottle as well as large, easy to read, metric graduation marks which are certified to ±5% accuracy. PC carboys are made from a USP Class VI, FDA Grade…

…Life Science Carboy Vent Filters are used for hydrophobic venting and solvent filtration applications. The PTFE filter membrane is ideal for maintaining purified water stored in carboys, or for sterile venting during a slow exhaust/liquid autoclave cycle of EZgrip® carboys. All materials…

…handling is required Clear polycarbonate Autoclavable at 121°C Lot traceable/lot controlled Polycarbonate carboys are clear, tough and can be used from -100 to +121°C. Lighter and safer than glass, these carboys can hold 20 liters nominal or 22.5 liters brim capacity.…

…Heavy Duty Vacuum Carboys are useful as a vacuum trap, and will hold full vacuum up to 8 hours. Constructed of thick walled natural polypropylene PP) provides added strength. Supplied with white 83B PP closure with TPE (thermoplastic elastomer) gasket. Autoclavable when closure threads…

…esters, hydrocarbons, etc. Graduated to contain in 1-gallon and 5-liter increments Neck i.d. 2 3/4” Dimensions: 10 liter carboys measure 15 high x 10 o.d.; 20 liter carboys measure 21 high x 11 1/2 o.d. NOTE: Before autoclaving, set cap on top of carboy without engaging threads.

These polypropylene, autoclavable carboys feature wide handles for convenient carrying and pouring. Ideal for storing various laboratory solutions. Threads should be totally disengaged before autoclaving.

…transfer or sampling in biopharmaceutical applications with Thermo Scientific™ Nalgene™ Polypropylene Sanitary Carboys with 3" Sanitary Neck Design. The carboy's welded sanitary neck is easy to clean with no screw threads. Versatile with 3" sanitary tri-clover…

…Top Works Systems include solid, 2-port and 3-port versions Platinum-cured silicone tubing is fused through stopper to form one-piece closure system Autoclavable and leak proof systems permit aseptic liquid transfer from most NALGENE bottles and carboys Meets USP VI requirements

…transport solids, powders and liquids using Thermo Scientific™ Nalgene™ Wide Mouth Polypropylene Carboys with Handles. These durable natural polypropylene (PP) carboys feature a convenient wide-mouth opening to promote ease of cleaning and dispensing. The wide-shoulder handles…

…place of cap Not recommended for use with hazardous materials Autoclavable and leakproof Dimensions: 10 liter carboy: 15 1/4” high; 20 liter carboy 20 1/2” high; 50 liter carboy 26 1/2” high. Before autoclaving, set cap or closure on top of container without engaging threads.

…and cleaning Molded carboy size identification Large, clear graduation marks with +/- 5% accuracy Dispense spigot Carboy, lid and spigot are autoclavable Carboy lid is modified to accept the Fi-Streem Float Switch The leak-proof lid for the 20 Liter Carboys (B00122, B00123 and…

…to Nalge containers Nalge 2162 83 mm polypropylene cap with fittings Two 1/2” filling ports and one vent port Autoclavable Two barbed filling ports for 1/2-inch-i.d. tubing and one 3/8-inch-o.d. vent port used with syringe/air filters. Includes polypropylene…

Autoclavable, polypropylene, heavy-duty construction Stylish, octagonal square shape Choice of three sizes A new range of high performance, large bottles and carboys come in a choice of 5, 10 or 20 liters. The stylish, square octagonal shape provides for increased rigidity when…

…construction and are steam autoclavable at 121°C (250°F). When autoclaving, do not engage cap threads. The 83mm screw cap includes a built-in thermo-plastic elastomer washer for positive seal. Molded-in bung accepts the easy-to-use spigot and is located low on carboy for more complete drainage.

…spigot is sealed by two Teflon® O-rings. Delivery spout takes 5/8” i.d. tubing; polyethylene adapter that takes 1/4” to 3/8” i.d. tubing is supplied. Dimensions (height x o.d.): 10 liter carboys measure 15” x 10”; 20 liter carboys measure 20 7/8” x 11”.

…attached to molded-in shoulder loops Leakproof Autoclavable Ideal for storing solutions, media, and sterile water. Useful for handling large volumes of powders and other solid samples. Calibrated in liters and gallons. Before autoclaving, set cap on top of the container without engaging…

…system will fit on all Nalgene carboys and large bottles with 83B neck finish. Closure valve body has built in valve/seal which closes off carboy to potential contaminants if hose barb inserts are removed. PP resin offers enhanced chemical resistance, however, product should not be autoclaved.

…and screw closure High-impact strength Leakproof Autoclavable Window-clear Sturdy handgrips Space-saving rectangular shape. All sizes feature molded-in graduations. Good for cold room use. Autoclave only when empty. Before autoclaving, set cap or closure on top of the container without…

…acids and some alcohols; not usable with strong acids, bases, aldehydes, ketones, esters, hydrocarbons, etc. CAUTION: when autoclaving large batches, make sure cycle is set so that contents reach proper autoclaving temperature. Before autoclaving, set cap on top of carboy without engaging threads.

Use the Thermo Scientific™ Nalgene™ Autoclavable Polypropylene Carboys with 1.5" Sanitary Flanges as dispensing ports or with secure hookup for supply reservoirs to systems such as fermentors or chromatography columns. Features: Molded-in handles for ease in…

…2319 series Autoclavable and leakproof Similar to 1753C10 series, but made entirely of polypropylene, including spigot and size 83B cap with TPE gasket. Before autoclaving, set closure on carboy without engaging threads. Dismount and disassemble spigot before autoclaving. Autoclave only when…

Ensure more complete drainage with the low outlet of Thermo Scientific™ Nalgene™ Autoclavable Polypropylene Carboys with Bottom Tubulation, excellent for distilled water and culture media. Features: Bottom tubulation molded in one piece with bottle Molded-in handles…

…Excellent chemical resistance Low profile design fits easily in tight spaces, on shelves or in refrigerators Leakproof Can be autoclaved repeatedly Polypropylene spigot and screw closure, size 63 mm; tubing same as 1753L30 series Dimensions: 8 liter Lowboys measure 6…

Nalge 2321 series Rectangular carboy for storing and dispensing media, sterile water, etc. Autoclavable Similar to 1753F10 series, but of polypropylene, with stainless steel carrying strap Leakproof Autoclave only when empty. Before autoclaving, set cap or closure on top of the container…

Thermo Scientific™ Nalgene Quick-Action Tefzel Spigots are chemically resistant to selected solvents and other chemicals. Body and plug are made of Tefzel ETFE Accepts tubing with 5/8'' I.D. Autoclavable

…lock. For use with the PET Carboy and fermentation applications. 1166C15: A solid #10 Stopper for use with the PET carboy and the PP closure with center hole. 1166C16: Replacement autoclavable polypropylene spigot for use with the PET Carboy. 1166C17: Large red o-ring…

…filtration applications Useful for maintaining purified water stored in carboys Features a Teflon PTFE membrane Hydrophobic membrane permits sterile venting on a slow exhaust/liquid autoclave cycle of carboys up to 50L Can be used up to five times in venting applications …

…Price: $536.00 Stainless steel Designed to move small NALGENE tanks (up to 30 gallons/115 liters) and carboys during daily use or servicing. Autoclavable, non-corrosive and chemically resistant to acids and bases. Casters won't leave marks on floor. * Sale price…