6 Place Manifold

Compare Tool

Select up to 3 products

6 Place Manifold
1 - 25 of 25
Sort
View
Show
  • PVC Manifold

    Advantec MFS

    …and durable PVC material makes this vacuum manifold a great alternative to stainless steel. Polyvinylchloride(PVC) is resistant to acids. The standard cup accepts a No.8 or 8b stopper to adapt to microanalysis units of various sizes. The 3-place manifold can accomodate 90mm holders. Use 47mm or…

  • …adapt to various microanalysis units. The 3-place manifold can accomodate 90mm holders. Use 47mm or smaller holder units on the 6-place model. Valves have a PTFE stopcock. Available with 2-way or 3-way valves. Use the 3-way valve when the manifold is used under closed conditions and must be vented…

  • Laboratory Manifold

    Pall Life Sciences

    …and/or sterilization. Manifolds that adapt to you: Whether you are right or left-handed, setting up your test workflow is second nature. The components interchangeable and designed with a simple slip fit to the manifold. Manifold includes 3-place manifold base, 3 manifold valves, 1 end cap, and…

  • …Support cup accepts a No.8 or 8b stopper Features a flushing manifold Applications requiring a closed system, as in sterility testing, use the sterility test manifold. It features a rear-mounted flushing or rinse manifold pipe which allows liquid to be brought aseptically up into the…

  • …the manifold is used under closed conditions and must be vented to the atmosphere without breaking the vacuum connection. The 3-way valve vent is female luer slip and accepts a disposable syringe filter(13JP020AN) or KS13 holder with PTFE filter(J020A013A) to maintain sterility. The manifold outlet…

  • The Chemglass high flow manifold system allows for easy and safe connection of your circulator to our glass process reactors. Manifold helps alleviate excessive mechanical forces placed on the glass vessel inlet/outlet. System is supplied complete as illustrated with Triple Insulated Flexible Hose.…

  • 3- and 6-place manifolds for sterility testing Stainless steel body, valves and filter supports

  • AS220 Two-place vacuum filtration manifold for MBS I AS220 Two-place vacuum filtration manifold for MBS I

  • Stainless steel filter funnel three-place manifold, for microbiology monitors and analytical funnels Stainless steel filter funnel three-place manifold, for microbiology monitors and analytical funnels AS 300 and 600 Series The stainless steel manifold for three or six filtration units is fitted…

  • …Includes aluminum lid w/ 8 valves & cord pass through. Use w/ 1/2" & 3/4" adapters. 4-Port Manifold for FreeZone Freeze Dryers (1177K17): 4-Port Manifold for use with 1L, 2.5L, 4.5L, 8L, 6L, 12L or 18L FreeZone Freeze Dryer. Type 304 Stainless Steel complete with 4…

  • Flow Cell Assemblies

    IBI Scientific

    …cover slip OR TCT treated APET plastic cover slip, influent & effluent manifolds, peristaltic pump tubing, clear influent & effluent tubing, luer lock effluent interrupt, I.D. flags pre-attached in two places, two pinch clamps, and inoculation tape. Individual convertible flow cells are…

  • …and dual post assembly. The manifold delivers nitrogen gas to the needles or glass pipettes, which direct the gas onto the sample’s surface. This method results in rapid solvent evaporation and sample concentration. In order to conserve nitrogen gas, the manifold has toggle switches which…

  • …and dual post assembly. The manifold delivers nitrogen gas to the needles or glass pipettes, which direct the gas onto the sample’s surface. This method results in rapid solvent evaporation and sample concentration. In order to conserve nitrogen gas, the manifold has toggle switches which…

  • …flask and through the Snyder column. The solvent vapor then cools in the condenser which is attached to a centrally located water manifold. The glassware is held in place with quick disconnect fittings which allow for easy retrieval of samples. The solvent leaves the condenser through a specially…

  • …and dual post assembly. The manifold delivers nitrogen gas to the needles or glass pipettes, which direct the gas onto the sample’s surface. This method results in rapid solvent evaporation and sample concentration. In order to conserve nitrogen gas, the manifold has toggle switches which…

  • …for acid fume exhaust manifold connection, and one for auxiliary-air blower inlet connection. Models are available that digest and distill up to 18 samples at one time. Kjeldahl units require a remote blower to exhaust fumes. Features Distillation manifold with seamless stainless…

  • …of our system) allowing customers to instantly take it off and flip it over. No adhesives are used! Our simple gasket design even allows you to place the lid on the chamber somewhat off center and still pull a full vacuum. This is a feature that most other vacuum chambers do not offer. The maximum…

  • …of our system) allowing customers to instantly take it off and flip it over. No adhesives are used! Our simple gasket design even allows you to place the lid on the chamber somewhat off center and still pull a full vacuum. This is a feature that most other vacuum chambers do not offer. The maximum…

  • Rapid Digestor-4

    Labconco

    …Fume Removal System is required for use with Labconco Rapid Digestor-4. Consists of borosilicate glass manifold with 4 bulb eductors precisely aligned to rest atop the digestion tubes. Manifold is encased in aluminum housing with plastic handle. A 5' rubber connecting hose for connection to a water…

  • …Fume Removal System is required for use with Labconco Rapid Digestor-25. Consists of borosilicate glass manifold with 25 bulb eductors precisely aligned to rest atop the digestion tubes. Manifold is encased in aluminum housing with plastic handle. Includes water aspirator for use with 40 psi water…

  • …heat transfer. Since these heat blocks are made-to-order, we will request that you deliver us three sample vials for each unique vial size upon placing an order for a 24 Position MICROVAP. The digital temperature controls and solid aluminum heating unit provide uniform heat up to 130°C with…

  • … Since these inserts and heat blocks are made-to-order, we will request that you deliver us three sample vials for each unique vial size upon placing an order for a 15 Position MICROVAP. The digital temperature controls and solid aluminum heating unit provide uniform heat up to 130°C with…

  • …of our system) allowing customers to instantly take it off and flip it over. No adhesives are used! Our simple gasket design even allows you to place the lid on the chamber somewhat off center and still pull a full vacuum. This is a feature that most other vacuum chambers do not offer. The maximum…

  • … Process eight samples up to 450 mL in size at once Vortexes up to 500 rpm. Heat warms samples from ambient to 70°C. The nitrogen blow down manifold is microprocessor controlled and directs the nitrogen flow into the selected sample tube(s). Timer pauses system and alerts user when predetermined…

  • …minutes Two heater receptacles with heater door to accommodate heater pans. Ten aluminum heater pans are included Stainless steel support manifold with three control slide slots and perforations for attaching a shelf and hook Stainless steel hook, shelf and perforated tray Control panel…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.