47mm Filter

Compare Tool

Select up to 3 products

47mm Filter
1 - 32 of 69
Sort
View
Show
  • Hydrosol 47mm Filter Holder

    MilliporeSigma

    Assembly consists of stainless steel funnel, funnel base, and filter support; anodized aluminum locking ring; nylon lockwheels; PTFE gaskets; silicone stopper; grounding wire. Holder is autoclavable but not with filter in place.

  • 47mm Magnetic Filter Funnels

    Pall Life Sciences

    …for the analysis of aqueous samples for microbiological and particulate contamination using the Membrane Filter (MF) Technique. The Magnetic Filter Funnel is ideal for use with a filter funnel manifold or side-arm vacuum flask using a rubber stopper connection. Dual magnets ensure a tight,…

  • 47mm Sterility Test Filter Holder

    Advantec MFS

    …Silicone cover, KS13 filter holder with injector needle, PTFE stopcock, and 1/4"ID silicone tubing(21"L). The anodized aluminum clamp secures the membrane between the funnel and sintered glass frit base. The No.8 silicone stopper mounts in a standard 1L vacuum filter flask or manifold cup.…

  • Membrane Circles, Cellulose Nitrate, White Plain, 1µm 47mm

    GE Healthcare

  • Vacuum Filter Holder Set, 47mm

    United Scientific Supplies

    …borosilicate glass funnel, anodized aluminum spring clamp, vacuum base with sintered disc, and ground joint flask. Membrane filters are not included. Filter diameter is 47mm. Filtration area is 9.6cm². Capacity: Funnel: 300ml, Flask: 1L. Outlet fitting: 6mm (1/4") O.D. tubulated cap sidearm to…

  • Filter, Memb 0.2µm 47mm Pk/200

    Hach

    Gelman Sciences Supor S-Pack contains 0.2-µm, 47-mm membrane filters designed for the Membrane Filtration technique. Membranes have superior retention characteristics and flow rate. Membranes work well for isolating and enumerating Pseudomonas sp., especially stressed organisms from process water…

  • Aerosol Standard Filter Holder, 47mm, Stainless Steel

    MilliporeSigma

    Applications Vacuum-filter air or other gases from open atmospheres or from closed systems for particulate contamination analysis. Standard holder Closed system connection, with inlet dispersion chamber and 11 mm O.D. inlet/outlet connections. Open-type holder Full-area inlet…

  • 47mm Membrane Filtration Apparatus

    Ace Glass

    Borosilicate glass filtration apparatus accomodates 47mm diameter membrane filters. The new design utilizes a nylon Ace-Thred adapter to join the glass funnel, filter flask and fritted disc together. This design eliminates the need for the clamping device, stopper and base piece. The unit is easy to…

  • 47mm All-Glass Filtration Assemblies

    Advantec MFS

    Ground glass connection points Funnel, Base, and Flask Sintered glass, Stainless steel, or PTFE filter support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The All-Glass design restricts contact…

  • 47mm Glass Vacuum Holder Assemblies

    Advantec MFS

    …steel, or PTFE support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The 47mm holder is the standard size for microbiology and uses a 47mm filter membrane. The anodized aluminum clamp secures the…

  • 47mm Stainless Steel Vacuum Holder

    Advantec MFS

    Durable stainless steel design  Can be flame sterilized The 47mm Stainless Steel Holder for the microanalysis of liquids for biological or particulate contamination under vacuum filtration. The unbreakable 304ss unit may be flame sterilized to sanitize the holder between samples. The…

  • 47mm Phase/Fraction Collector Filtration Assemblies

    Advantec MFS

    …filtrate during filtration Two mounting options: No.8 stopper or 40/35 joint Sintered glass, Stainless steel, or PTFE filter support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The Phase/Fraction…

  • Sterile Disposable Petri Dishes for 47mm Membranes

    Advantec MFS

    Advantec Disposable Petri Dishes are ideal for culturing microorganisms on a 47mm diameter membrane filter. The dishes are made of high-quality polystyrene material and are pre-sterilized by gamma irradiation. The dish features a squared edge and a raised ridge for ease of handling and secure…

  • ME25 Select/21 Membrane Circles

    GE Healthcare

    Thomas No. 1210M15 ME 25 Select 21 ST membrane circles white, 47 mm, mixed esters, 0.45 µm, 3.1 mm black grid, sterile, individual packs, 100/pk Thomas No. 1210M16 ME 25 Select 21 ST membrane circles white, 50 mm, mixed esters, 0.45 µm, 3.1 mm black grid, sterile, individual packs, 100/pk …

  • 47mm Glass Vacuum Holder, PTFE Seal

    Advantec MFS

    Standard size for microbiology  PTFE seal  Sintered glass, Stainless steel, or PTFE filter support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The PTFE Seal holder eliminates the…

  • 47mm Filtration Assembly with Fritted Glass Support

    DWK Life Sciences (Wheaton)

    Designed to collect the filtrate directly into a standard laboratory bottle Connection to the bottle is made with a polybutylene terephthalate (PBT) cap and a PTFE-faced silicone sealing ring Glass components are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to…

  • Funnel / PTFE Supp Assy 47mm

    DWK Life Sciences (Kimble)

    This 47 mm vacuum microfiltration assembly is used for autoclaving with the filter in place and is designed to handle up to 500 mL of sample liquids for the analysis of particulate or microbiological contamination. Supplied with a 40-60 micron porosity PTFE-faced fritted glass support base,…

  • KTO: Dish, Petri Dspl F / 47mm Pk/500

    Hach

    9x50mm Suitable for 47 mm membrane filters Polystyrene, presterilized and disposable Double rim ensures tight seal An area of the lid is frosted for identification 500/pack

  • 47mm Filtration Assembly with Standard Taper 40/35 Joint Connection and Fritted…

    DWK Life Sciences (Wheaton)

    …with borosilicate glass Vacuum hose connection is located above the filtration drip tip to prevent contamination in the vacuum line Filter area approximately 9.6 cm 2 capacity of funnel 300 mL; capacity of flask 1 L; vacuum connection 6.35 mm o.d.; dimensions 140 mm diameter flask,…

  • PTFE Filter Membranes

    MilliporeSigma

    Synonym: 1.5um PFTE filter membranes, 47mm, pk10

  • Analytical Filter Units

    Thermo Scientific Nalgene

    Peel-away funnels with reservoirs and CN membranes Nalgene 130 47mm CN membrane Complete pre-packaged sterile assemblies Stable wide-base design and 150 mL volume size for larger sample and rinse procedure volumes “Squeeze and twist” polypropylene design…

  • Polysulfone Vacuum Filter Holders

    Advantec MFS

    47mm Filter Graduated Funnels: 300mL, 500mL, 800mL Autoclavable Advantec’s Polysulfone 47mm Filter Holders are an economical alternative to glass vacuum holders. The durable polysulfone plastic construction is chemically resistant and can withstand mishandling. The recessed…

  • Open-Face Aerosol Filter Holder

    Advantec MFS

    This 47mm aerosol filter holder is open-face for environmental monitoring or sampling of open atmosphere air and gases. Use for particulate or bacterial analysis. Thermoplastic polymer Polypropylene (PP) construction makes this holder durable and compatible with a wide range of chemical…

  • Polypropylene In-Line Filter Holder

    Advantec MFS

    Thermoplastic polymer Polypropylene (PP) lends to this units durability and compatibility with a wide range of chemical solvents and temperatures. Exterior locking ring design allows unit to be assembled quickly and efficiently without tearing the membrane or removing from lines. Body and…

  • Vacuum Filter Holder Set, Fritted Glass

    United Scientific Supplies

    47mm sterile membrane filters. Also applicable for analysis of suspended solids in water using 47mm depth filters. Complete set includes a borosilicate glass funnel and base., anodized aluminum spring clamp, and perforated silicone stopper. Parts are available seperately. Filter Diameter: 47mm,

  • Filter Flask with Stopper Joint

    Wilmad LabGlass

    This borosilicate glass heavy wall filtering flask can be used with FILTERWARE® Filtration Apparatus (LG-1755). Supplied with a silicone stopper with 9/16" hole and a #2 hose connection, the 4000mL flask has 1/2" connections.

  • Vented In-Line Filter Holder, Stainless Steel

    Advantec MFS

    47mm filter diameter Available in type 304ss or 316ss Filter liquids or gases at point-of-use This 47mm in-line holder (model KS47) is available in both type 304 or 316 stainless steel. The PTFE coated support screen prevents sticking of the membrane during autoclaving. The…

  • High Pressure In-Line Filter Holder, Stainless Steel

    Advantec MFS

    High-quality and durable, this 47mm stainless steel in-line pressure holder can operate at high pressures up to 1420 psi (9.8 MPa). Standard FPM(Viton) O-rings are compatible with many aggressive liquids and gases. Type 304ss body and type 316ss sintered support screen. An optional…

  • Sanitary In-Line Filter Holders, Stainless Steel

    Advantec MFS

    …non-threaded inlet and outlet connections that can be completely disassembled for thorough cleaning. Dual sealing system compresses filter to ensure no lateral wicking. The 47mm holder has a vent to allow air venting on upstream side of membrane at any time during filtration. Materials: Type…

  • Pressure Filter Holders with Reservoir, Stainless Steel

    Advantec MFS

    Reservoir elliminates the need for a pressure vessel Filter small batches of liquid Available in type 304ss or 316ss These quality stainless steel holders are designed for filtering small batches of liquid without having to use a separate pressure vessel. There are separate ports for…

  • Vacuum Filter Holder Set with PTFE-Coated Funnel & Base

    United Scientific Supplies

    …with PTFE to avoid filter damage and membrane adhesion during autoclaving. Complete set includes a PTFE-faced borosilicate glass funnel and PTFE-faced base, anodized aluminum spring clamp, and perforated silicone stopper. Parts are also available seperately. Filter Diameter: 47mm, Filtration area…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.