UN3264, Bottle, Poly, Solutions
-
Keller's Etch
Reagents®Composition: Water 96.22%, Nitric Acid 2.59%, Hydrochloric Acid 0.64%, Hydrofluoric Acid 0.55% Boiling Point: Approximately 100°C Density: 1.02 Melting Point: Approximately 0°C Color: Colorless to slightly yellow liquid Physical State: Liquid pH Range: Solubility Information: Miscible…
-
Ceric Sulfate, 0.10N, Standardized
Reagents®Concentration: 0.1N Composition: Water 87.08%, Sulfuric Acid 8.06%, Ceric Sulfate 4.86% Boiling Point: Approximately 100°C Density: 1.09 Melting Point: Approximately 0°C Color: Orange liquid Physical State: Liquid pH Range: Solubility Information: Miscible Shelf Life: 24 Months …
-
UN No.: 3264 pH: 0.2 (H2O, 20°C) Solubility: (20°C) soluble Density: 1.024 g/cm3 (20°C) Ignition Point: 0.2 (H2O, 20°C)
-
Ammonium Molybdate TS
Ricca ChemicalWe offer a broad range of USP (United States Pharmacopeia) and multicompendial (USP/EP) solutions and test reagents. Our product line - the most extensive available - makes it easy for you to select and order the products you need. Our FDA-registered and inspected facilities, cGMP compliant…
-
-
Ricca Ferric Alum Indicator
Ricca ChemicalThe Ricca Chemical ferric alum indicator with a composition of 81.58% water, 9.26% ferric ammonium sulfate dodecahydrate and 9.16% nitric acid, is suitable for use in medicine, chemical analysis and metallurgy. It can be stored at a temperature of 15 to 30 degree C.
-
-
Ricca 10% (v/v) Nitric Acid
Ricca ChemicalThe Ricca Chemicals nitric acid can be used to increase the number of acid sites by altering the surface of activated carbon. It is a common laboratory reagent and an important industrial chemical for the manufacture of fertilizers and explosives.
-
Inconel GE Etch, Volumetric
Reagents®Composition: Water 49.21%, Ferric Chloride Hexahydrate 38.42%, Hydrochloric Acid 12.37% Density: 1.29 Color: Brown liquid Physical State: Liquid pH Range: Solubility Information: Miscible Shelf Life: 6 Months Storage: Ambient DOT: UN3264, CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S.…
-
Ricca 5% v/v Nitric Acid
Ricca ChemicalNitric acid is the inorganic compound with the formula HNO3. It is a highly corrosive mineral acid. The compound is colorless, but older samples tend to be yellow cast due to decomposition into oxides of nitrogen. Most commercially available nitric acid has a concentration of 68% in water.
-
Continental Copper Solution, Volumetric
Reagents®Composition: Water 75.54%, Copper Sulfate Pentahydrate 20.64%, Hydrochloric Acid 3.82% Boiling Point: Approximately 100°C Density: 1.1 Color: Blue liquid Physical State: Liquid pH Range: Solubility Information: Miscible Shelf Life: 24 Months Storage: Ambient DOT: UN3264, CORROSIVE…
-
Manganous Sulfate, Solution
Reagents®Composition: Water 57.51%, Sulfuric Acid 23.04%, Phosphoric Acid 14.45%, Manganous Sulfate Monohydrate 5% Boiling Point: 850 °C Density: 1.27 Melting Point: 700 °C Color: Pink liquid Physical State: Liquid Solubility Information: Miscible Synonyms: Manganous Sulfate in Phosphoric and…
-
Ricca 0.2% Pd (2000 ppm Pd) Matrix Modifier
Ricca ChemicalThe Ricca Chemical matrix modifier with a composition of 94.98% water, 4.82% nitric acid, 0.19% palladium and 0.01% hydrochloric acid, is suitable for use as a buffer for analyte stabilization or sample matrix volatilization. It can be stored at a temperature of 15 to 30 degree C.
-
Copper Sulfate, 20% (w/w), Volumetric
Reagents®Concentration: 20% w/w with Hydrochloric Acid Composition: Water 76.35%, Copper Sulfate Pentahydrate 19.96%, Hydrochloric Acid 3.69% Boiling Point: 100°C Density: 1.1 Color: Blue/green liquid Physical State: Liquid pH Range: Solubility Information: Miscible Shelf Life: 24 Months …
-
Electrolyte Solution, Volumetric
Reagents®Color: Colorless liquid Composition: Water 90.52%, Sulfuric Acid 8.47%, Acetic Acid 1.01%, Sodium Chloride 0% DOT: UN3264, CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S. (SULFURIC ACID, ACETIC ACID), 8, P.G. III Density: 1.04 Physical State: Liquid Shelf Life: 12 Months Solubility…
-
Ricca 8% (w/v) Aqueous Perchloric Acid
Ricca ChemicalThe Ricca Chemical perchloric acid with composition of 92.41% water and 7.59% perchloric acid is suitable for research and laboratory use. It is used in metal plating, making explosives and electro polishing. This acid also separates sodium and potassium by acting as an oxidizer. It can be stored…
-
Ricca Matrix Modifier
Ricca ChemicalThe Ricca Chemical matrix modifier with a composition of 94.59% water, 4.91% nitric acid, 0.49% palladium and 0.01% hydrochloric acid, is suitable for use as a buffer for analyte stabilization or sample matrix volatilization. It can be stored at a temperature of 15 to 30 degree C.
-
-
Ricca 5% v/v Sulfuric Acid
Ricca ChemicalThe Ricca Chemicals 1 Liter 5% v/v sulfuric acid is mainly used in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage.
-
-
-
Copper Sulfate, 22.5% (w/v), Volumetric
Reagents®Concentration: 22.5% with 11.3% Hydrochloric Acid Composition: Water 76.07%, Copper Sulfate Pentahydrate 19.64%, Hydrochloric Acid 4.29% Boiling Point: Approximately 100°C Density: 1.15 Color: Blue/green liquid Physical State: Liquid pH Range: Solubility Information: Miscible Shelf…
-
Ricca 404 g/L in dilute Nitric Acid Ferric Nitrate Solution
Ricca ChemicalThe Ricca Chemicals ferric nitrate solution is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage.
-
Tri-Acid Solution, Volumetric
Reagents®Composition: Water 81.98%, Nitric Acid 8.40%, Hydrochloric Acid 5.22%, Sulfuric Acid 4.41% Density: 1.09 Color: Colorless to slightly yellow liquid Physical State: Liquid pH Range: Solubility Information: Miscible Shelf Life: 36 Months Storage: Ambient DOT: UN3264, CORROSIVE…
-
-
-
-