UN3264, Solutions
-
-
Sulfuric Acid, Solution, 0.1 N
GFS ChemicalsH2SO4 CAS#: 7664-93-9 F.W.: 98.09 NFPA#: 2-0-1 Specific Gravity: 1.010 0.05 mol/L
-
Sodium molybdate, Na2MoO4, is useful as a source of molybdenum. This white, crystalline salt is often found as the dihydrate, Na2MoO4·2H2O. The molybdate(VI) anion is tetrahedral. Two sodium cations coordinate with every one anion.
-
-
-
Stannous Chloride, 10% W/V Solution
GFS ChemicalsSnCl2•2H2O CAS#: 10025-69-1 F.W.: 225.63 For mercury determination
-
Tri-Acid Solution, Volumetric
Reagents®Composition: Water 81.98%, Nitric Acid 8.40%, Hydrochloric Acid 5.22%, Sulfuric Acid 4.41% Density: 1.09 Color: Colorless to slightly yellow liquid Physical State: Liquid pH Range: Solubility Information: Miscible Shelf Life: 36 Months Storage: Ambient DOT: UN3264, CORROSIVE…
-
Dihydrogen hexafluorozirconate solution, 45 wt. % in water
BeanTown ChemicalCAS: 12021-95-3 MDL No: MFCD00082965 UN No: UN3264; Haz Class: 8; Packing Group: II Liquid Linear Formula: H2ZrF6 MW: 207.22 Density (g/mL): 1.51
-
-
-
-
Nitric Acid, Dilute R (125 g/L HNO3)
Ricca ChemicalWe offer a broad range of EP (Euopean Pharmacopiea) and multicompendial (USP/EP) solutions and test reagents. Our product line - the most extensive available - makes it easy for you to select and order the products you need. This product is certified as a reagent for the following test…
-
-
Titanium(III) chloride solution, 20 wt. % in 3% hydrochloric acid
BeanTown ChemicalCAS: 7705-07-9 EC No: 231-728-9 MDL No: MFCD00011266 UN No: UN3264; Haz Class: 8; Packing Group: II Liquid Linear Formula: TiCl3 MW: 154.23 Density (g/mL): 1.192
-
-
Ricca 2% (w/w) Nitric Acid
Ricca ChemicalThe Ricca Chemicals 2% (w/w) nitric acid is mainly used in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage.
-
Bismuth Nitrate, 0.01M, Standardized
Reagents®Concentration: 0.01M Composition: Water 93.03%, Nitric Acid 6.51%, Bismuth (III) Nitrate Pentahydrate 0.46% Boiling Point: Approximately 100°C Density: 1.1 Melting Point: Approximately 0°C Color: Colorless liquid. Physical State: Liquid pH Range: Solubility Information: Miscible …
-
Ricca Ferric Alum Indicator
Ricca ChemicalThe Ricca Chemical ferric alum indicator with a composition of 81.58% water, 9.26% ferric ammonium sulfate dodecahydrate and 9.16% nitric acid, is suitable for use in medicine, chemical analysis and metallurgy. It can be stored at a temperature of 15 to 30 degree C.
-
-
Ceric Sulfate, 0.10N, Standardized
Reagents®Concentration: 0.1N Composition: Water 87.08%, Sulfuric Acid 8.06%, Ceric Sulfate 4.86% Boiling Point: Approximately 100°C Density: 1.09 Melting Point: Approximately 0°C Color: Orange liquid Physical State: Liquid pH Range: Solubility Information: Miscible Shelf Life: 24 Months …
-
Palladium Nitrate, Solution
GFS ChemicalsPd(NO3)2•2H2O CAS#: 10102-05-3 F.W.: 266.46 Matrix modifier for graphite furnace AA. Nominally 1% Pd solution in about 5% nitric acid.
-
Keller's Etch
Reagents®Composition: Water 96.22%, Nitric Acid 2.59%, Hydrochloric Acid 0.64%, Hydrofluoric Acid 0.55% Boiling Point: Approximately 100°C Density: 1.02 Melting Point: Approximately 0°C Color: Colorless to slightly yellow liquid Physical State: Liquid pH Range: Solubility Information: Miscible…
-
Ricca 10% (v/v) Nitric Acid
Ricca ChemicalThe Ricca Chemicals nitric acid can be used to increase the number of acid sites by altering the surface of activated carbon. It is a common laboratory reagent and an important industrial chemical for the manufacture of fertilizers and explosives.
-
Ricca 404 g/L in dilute Nitric Acid Ferric Nitrate Solution
Ricca ChemicalThe Ricca Chemicals ferric nitrate solution is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage.
-
Ricca 0.2% Pd (2000 ppm Pd) Matrix Modifier
Ricca ChemicalThe Ricca Chemical matrix modifier with a composition of 94.98% water, 4.82% nitric acid, 0.19% palladium and 0.01% hydrochloric acid, is suitable for use as a buffer for analyte stabilization or sample matrix volatilization. It can be stored at a temperature of 15 to 30 degree C.
-
-
Copper Sulfate, 22.5% (w/v), Volumetric
Reagents®Concentration: 22.5% with 11.3% Hydrochloric Acid Composition: Water 76.07%, Copper Sulfate Pentahydrate 19.64%, Hydrochloric Acid 4.29% Boiling Point: Approximately 100°C Density: 1.15 Color: Blue/green liquid Physical State: Liquid pH Range: Solubility Information: Miscible Shelf…
-
Ricca 5% v/v Sulfuric Acid
Ricca ChemicalThe Ricca Chemicals 1 Liter 5% v/v sulfuric acid is mainly used in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage.
-
Mixed Acids
Reagents®Composition: Water 52.22%, Nitric Acid 20.29%, Phosphoric Acid 13.86%, Sulfuric Acid 13.63% Density: 1.3 Color: Colorless to yellow liquid Physical State: Liquid pH Range: Solubility Information: Miscible Shelf Life: 24 Months Storage: Ambient DOT: UN3264, CORROSIVE LIQUID, ACIDIC,…
-
UN No.: 3264 pH: 0.2 (H2O, 20°C) Solubility: (20°C) soluble Density: 1.024 g/cm3 (20°C) Ignition Point: 0.2 (H2O, 20°C)
-
Electrolyte Solution, Volumetric
Reagents®Color: Colorless liquid Composition: Water 90.52%, Sulfuric Acid 8.47%, Acetic Acid 1.01%, Sodium Chloride 0% DOT: UN3264, CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S. (SULFURIC ACID, ACETIC ACID), 8, P.G. III Density: 1.04 Physical State: Liquid Shelf Life: 12 Months Solubility…
-
CAS: 16941-12-1 EC No: 241-010-7 MDL No: MFCD00011330 UN No: UN3264; Haz Class: 8; Packing Group: III Liquid Linear Formula: H2PtCl6 MW: 409.82