10, Chemicals
-
Buffer Solutions
Avantor - J.T.Baker®Ready-to-use buffers Accurate within ±0.01 pH unit of specified value, at 25°C In 500 mL polyethylene squeeze bottles
-
Buffer Standard, pH 10.00
ExaxolMeets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of 0.01 pH units Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Color-Coded pH Buffers
Ricca ChemicalStandardized and certified traceable to NIST Standard Color-coded for quick reference Accuracy ±0.01 pH at 25°C pH temperature chart, lot numbers and expiration dates on each label pH 4.0 buffer is colored red, 7.0 buffer is yellow or green and 10.0 buffer is blue.…
-
-
Buffer, reference standard pH 10.00±0.01 (25 °C)
MilliporeSigmaMDL Number: MFCD00130682 Storage: 15-25C Application: Buffer, reference standard has been used for pH meter calibration for adjusting pH of drug solutions and human neuroblastoma culture medium.
-
Orion® pH Buffer & Electrode Rinse Solution Pouches
Thermo Scientific OrionAccurate calibration Sealed buffer pouch provides disposable convenience More accurate first time measurements Easier to use than conventional liquid buffers; no secondary reservoir required. All buffers are certified NIST traceable; used pouch can be attached to permanent batch…
-
pH Buffer Solutions
OaktonChoose from economical solution bottles or individually sealed pH buffer pouches. NIST traceable materials Labeled with pH vs. temperature tables for accurate calibration All Oakton pH buffer solutions are freshness dated, and standardized against NIST-traceable references to…
-
Buffer Solutions
Avantor - Macron Fine Chemicals™Color coded for convenience Accuracy to ±0.01 Traceable to NIST pH 4.01 (red), 7.00 (yellow) and 10.00 (blue are available).
-
Buffer Solution pH 10.00, Color Code Blue
MilliporeSigmaSaybolt viscosity 130 at 100°F Synonyms: Mineral Oil Formula: Indeterminate CAS Number: 8012-95-1
-
spex® Certified Buffer Standard
SPEX CertiPrepCertified pH Buffers SPEX CertiPrep pH Buffers are accurate and certified to ISO/IEC 17025:2005 and ISO 17034:2016 requirements. Buffers pH 2 through pH 12 are conveniently packaged in 500 mL bottles. Certified pH buffers are made using high purity starting materials and ASTM Type I Water and are…
-
The Extech PH10-P are two bottles of 10 pH Buffer Solution. Comes in convenient pint size plastic bottles.
-
Fluka Ammonia buffer solution ammonium chloride / ammonia, pH 10, for…
Honeywell Research ChemicalsChemical name: Ammonia buffer solution UN Number: UN 3082
-
Buffer Solution Concentrate, pH 10.00
Spectrum ChemicalBuffer Solution Concentrate, pH 10.00 - Spectrum's Buffer Solution Concentrates when diluted as directed will yield a pH 10.00 SOLUTION. Spectrum Buffer Solution Concentrates are relied upon for cost effective, fast, accurate results in life sciences and pharmaceutical quality control applications.
-
Fluka Buffer solution pH 11.0 (20 oC) boric acid / sodium hydroxide solution /…
Honeywell Research ChemicalsChemical name: Buffer solution pH 11.0 (20 °C) Chemical synonyms: Borate buffer solution Chemical purity: =99.0% UN Number:
-
Buffer Solution, pH 10.0, Clear
MilliporeSigmaChemical Formula: Mixture (Carbonate) Appearance: Clear, colorless solution Tolerance: ±0.02 Traceability: NIST Traceable pH at 25°C: 9.98-10.02 Storage: +15°C to +30°C Expiration date: Exp. 12 months
-
Fluka Buffer Solution pH 10.0 (20 deg C)
Honeywell Research ChemicalsThe Fluka 10 pH buffer solution helps in the efficient calibration of pH values in chemical samples. It comes in a plastic bottle and works at a temperature of 20 degree C. The calibrating of the pH value is carried out with standard buffer solutions (related to SRM by NIST) according to DIN…
-
pH Buffer
Reagents®The Reagents clear buffer with a pH rating of 10 is used for the minimal adjustment and neutralization of pH levels in acids and bases. It is mainly used in chemical laboratories and research facilities.
-
-
Clear pH Buffer Solutions
chemForce® (powered by Thomas Scientific)Harmonized #: 2806.10.0000 0000 Shelf Life (months): 24 Specific Gravity: 1.00 DOT: Not regulated Appearance: Colorless Physical State: Liquid Flash Point: Not applicable Solubility: Miscible Storage Temperature: Ambient Storage Code: General
-
pH Buffer Solutions
Sper ScientificSper Scientific offers a wide selection of pH calibration and buffer solutions. Always choose a pH 7 buffer plus at least one other pH value close to your expected measurement range. Using solutions of known pH value allow you to adjust the system to read accurate measurements. Calibration should…
-
Standardized pH Buffer Solutions
LaMotteFor use in calibration of pH meters Every unit from 1.0 to 12.00 pH In 500 mL bottles
-
-
Buffer pH 10.0 Blue
MilliporeSigmaFormula: Mixture (Borate) Formula Weight: N/A CAS #: N/A Synonym(s): N/A
-
Colored pH Buffer Standards
Inorganic VenturesInorganic Ventures' pH Standard is a certified reference material set in a water matrix for stability. This standard is Traceable to NIST and manufactured in accordance with our stringent Quality Assurance guidelines. One year Expiration Date.
-
Buffer, Reference Standard, pH 10.00 ± 0.01 at 25°C
Ricca ChemicalpH made Easy. Everything you need and want in a pH Buffer. NIST Traceability. Consistent, reliable performance. The tightest specification (+/- 0.01 pH unit) on all buffers. Long Expiration dates. Temperature conversion charts for all Buffers up to pH 11. Multiple sizes to fit your usage and budget…
-
Buffer Solution, pH 10.00 (Color Coded Blue)
GFS ChemicalspH (@ 25°C) 10.00 +/- 0.03 NIST Traceable
-
Certipur® Buffer Solution, pH 10.00
MilliporeSigma(boric acid/potassium chloride/sodium hydroxide) colour coded: blue, traceable to NIST and PTB pH 10.00 (25°C) Certipur®
-
BuffAR pH 10.00 Reference Solution, StandARd
Avantor - Macron Fine Chemicals™Color Coded Blue Specific Gravity: 1L = 1.00 Kg
-
pH Calibration buffers for tight tolerances For meters with 0.001 resolution Buffers are color-coded for easy visual identification.
-
pH 10 Standard
Inorganic VenturesInorganic Ventures' pH 10 Standard is a certified reference material set in a water matrix for stability. This standard is Traceable to NIST and manufactured in accordance with our stringent Quality Assurance guidelines. One year Expiration Date . Size: various …