Bottle, Poly, 4 L
-
Starch Indicator, Volumetric
Reagents®Boiling Point: Approximately 100°C Density: 1 Melting Point: Approximately 0°C Color: White translucent liquid Physical State: Liquid Solubility Information: Miscible Storage: Ambient DOT: NOT REGULATED.
-
Sodium Hydroxide, 0.3125N, Standardized
Reagents®Concentration: 0.3125N Composition: Water 98.76%, Sodium Hydroxide 1.24% Boiling Point: 100°C Density: 1.01 Melting Point: 0.0°C Color: Colorless liquid Physical State: Liquid pH Range: 13.5 Solubility Information: Miscible Shelf Life: 24 Months Storage: Ambient DOT: UN1824,…
-
Ricca Synthetic Fresh Water
Ricca ChemicalThe Ricca Chemical synthetic fresh water with a composition of 100.00% water, 100.00% sodium bicarbonate, 0.00% magnesium sulfate, 0.00% calcium sulfate dihydrate and 0.00% potassium chloride. It is suitable for research & laboratory use. It can be stored at a temperature of 15 to 30 degree C. …
-
Ricca 0.05 Molar (M/20) EDTA Titrant
Ricca ChemicalEDTA called as ethylenediaminetetraacetic acid is a complexometric indicator consisting of 2 amino groups and four carboxyl groups called as Lewis bases. Edta is a hexadentate ligand because of its competence to denote six pair of lonely electrons due to the formation of covalent bonds.
-
Methyl Alcohol, Anhydrous, AR (ACS)
Avantor - Macron Fine Chemicals™Formula: CH3OH Formula Weight: 32.04 CAS Number: 67-56-1 Synonym(s): Methanol
-
Conductivity Standard KCl 10 µS/cm
chemForce® (powered by Thomas Scientific)Composition: Water 100%, Potassium Chloride 0% Boiling Point: 100°C Density: 1 Melting Point: 0°C Color: Colorless liquid Physical State: Liquid pH Range: 5.4 to 8.6 Solubility Information: Miscible Shelf Life: 6 Months Storage: Ambient Packaging Type: Poly Natural…
-
Boiling Point: Approximately 100°C Density: 1.1 Melting Point: Approximately 0°C Color: Light green liquid Physical State: Liquid Solubility Information: Miscible Storage: Ambient DOT: UN3264, CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S. (SULFURIC ACID), 8, P.G. III
-
LabChem Reagent Alcohol
LabchemThe LabChem reagent alcohol is a denatured version of ethanol and is non-consumable. It is mainly used in laboratory and manufacturing factories. Application: For Laboratory and Manufacturing Use Only
-
GR ACS Ethyl Acetate
MilliporeSigmaSynonyms: Acetic Acid Ethyl Ester; EtOAc Molecular Formula: C4H8O2 Molecular Weight: 88.11 Linear Structural Formula: CH3COOC2H5 MDL Number: MFCD00009171 Purity: >=99.5% (GC) Melting Point: -84 C (lit.) Density: 0.902 g/mL at 25 C (lit.) …
-
Dimethyl Sulfoxide, BAKER ANALYZED ACS Reagent
Avantor - J.T.Baker®(methyl sulfoxide) Formula: (CH3)2SO Formula Weight: 78.13 CAS Number: 67-68-5 Specific Gravity: 1L = 1.10 Kg Flash Point: 89° C
-
Lactic Acid, Purified
Reagents®Composition: Lactic Acid 85%, Water 15% Assay Percent: 0.85 Grade: Purified Boiling Point: 122°C Density: 1.21 Molecular Weight: 90.08 g/mol Melting Point: 17°C Color: Colorless liquid Physical State: Liquid Solubility Information: Miscible Shelf Life: 122 Months Storage:…
-
OmniPur® 10X PBS Liquid Concentrate
MilliporeSigmaFormula: NaCl 137mM, KCl 2.7mM, Phosphate buffer 10mM (Na2HPO4/KH2PO4 pH7.4) on 10X diln Synonym(s): Phosphate Buffered Saline
-
Formula: C20H14O4 in Methanol Formula Weight: 318.33
-
Ricca 10% (w/v) Citric Acid
Ricca ChemicalThe Ricca Chemical citric acid with a composition of 90.39% water and 9.61% citric acid, is suitable for use as a preserving agent or as a flavoring agent. It can be stored at a temperature of 15 to 30 degree C.
-
Conductivity Standard KCl 500 µS/cm
chemForce® (powered by Thomas Scientific)Composition: Water 99.97%, Potassium Chloride 0.03% Boiling Point: 100°C Density: 1 Melting Point: 0°C Color: Colorless liquid Physical State: Liquid pH Range: 5.4 to 8.6 Solubility Information: Miscible Shelf Life: 24 Months Storage: Ambient Packaging Type: Poly Natural…
-
The Exaxol sodium hydroxide 50% - thiosulfate 2.5% w/v is suitable for use as a intravenous medication for cyanide or metal poisoning. It is used in manufacturing paper, leather and pesticides. It is also used as a dechlorinator for ponds and aquariums.
-
Ricca 0.025 Molar (M/40) EDTA Titrant
Ricca ChemicalEDTA called as ethylenediaminetetraacetic acid is a complexometric indicator consisting of 2 amino groups and four carboxyl groups called as Lewis bases. Edta is a hexadentate ligand because of its competence to denote six pair of lonely electrons due to the formation of covalent bonds.
-
Ricca 0.100 Normal (N/10) Sodium Carbonate
Ricca ChemicalThe Ricca Chemical sodium carbonate with a composition of 99.47% water and 0.53% sodium carbonate, is suitable for use in detergent and soap manufacturing. It can be stored at a temperature of 15 to 30 degree C.
-
Hydrochloric Acid 2.500N
ExaxolThe Exaxol 2.5N hydrochloric acid features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only Tested in an ISO 17025 accredited laboratory Standardized at 25 deg C…
-
Buffer Standard, pH 8.00
ExaxolMeets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of 0.01 pH units Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Ricca 2% w/v Starch Indicator
Ricca ChemicalStarch solutions are used as indicators in the detection of the endpoint of titrations involving Iodine solutions. Starch reacts with Iodine in the presence of Iodide ion to form an intensely colored blue complex, which is visible at very low concentrations of Iodine, making it a very good…
-
Ricca Sodium Hydroxide-Thiosulfate
Ricca ChemicalThe Ricca Chemical sodium hydroxide thiosulfate with a composition of 69.53% water, 28.68% sodium hydroxide and 1.79% sodium thiosulfate pentahydrate, is suitable for use in analytical chemistry applications. It can also be used in water treatment and medicine industries. This chemical is used with…
-
Conductivity Standard KCl 2000 µS/cm
chemForce® (powered by Thomas Scientific)Composition: Water 99.89%, Potassium Chloride 0.11% Boiling Point: 100°C Density: 1 Melting Point: 0°C Color: Colorless liquid Physical State: Liquid pH Range: 5.4 to 8.6 Solubility Information: Miscible Shelf Life: 24 Months Storage: Ambient Packaging Type: Poly Natural…
-
Acetone, AR (ACS)
Avantor - Macron Fine Chemicals™Formula: CH3COCH3 Formula Weight: 58.08 CAS Number: 67-64-1
-
Ricca 10% (w/v) Ferric Chloride
Ricca ChemicalIron(III) chloride is the inorganic compound with the formula FeCl3. Also called ferric chloride, it is a common compound of iron in the +3 oxidation state. The anhydrous compound is a crystalline solid with a melting point of 307.6 °C. The color depends on the viewing angle: by reflected light the…
-
Ferric Chloride
Ricca ChemicalFormula: FeCl3•6H2O Formula Weight: 270.30 Description: 0.025% (w/v) Aqueous Solution
-
Ethanol Anhydrous Alcohol
IBI ScientificEthanol is widely used for precipitating nucleic acids. The nucleic acid precipitate, which is formed in the presence of moderate concentrations of monovalent cations, is recovered by centrifugation and redissolved in an appropriate buffer at the desired concentration. 200 Proof Ethanol is…
-
Ricca 56% (w/w) Acetic Acid
Ricca ChemicalAcetic Acid is a weak acid in terms of chemical ionization, and solutions of it can be assayed with a standardized solution of a strong base, such as Sodium Hydroxide. The endpoint can be determined potentiometrically or by using an indicator that changes color in the pH range 8.0 - 10. Thymol Blue…
-
Ricca 0.1142 Normal Hydrochloric Acid
Ricca ChemicalThe Ricca Chemical hydrochloric acid with a composition of 99.59% water and 0.41% hydrochloric acid, is used to neutralize alkaline agents. It is suitable for use in food, textile, metal, photographic and rubber industries. It can be stored at a temperature of 15 to 30 degree C. Application: For…
-
Ricca ASTM Type II ACS Reagent Grade Water
Ricca ChemicalRicca ACS Reagent Grade Water is manufactured by a continuous process that has been validated to produce high purity Water meeting, as a minimum, the specifications below at the time of packaging. This water is specially purified by conventional water softening, prefiltration, activated carbon…
-
Sodium Hydroxide, 1.0N, Standardized
Reagents®Concentration: 1N Composition: Water 96.08%, Sodium Hydroxide 3.92% Boiling Point: Approximately 100°C Density: 1.04 Melting Point: Approximately 0°C Color: Colorless liquid Physical State: Liquid pH Range: 14 Solubility Information: Miscible Shelf Life: 24 Months Storage: Ambient…
-
The Exaxol 0.100 N ferrous ammonium sulfate is mainly used in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage. Application: For Laboratory use only