500 mL, Standards, GFS Chemicals
-
Arsenic 10,000 ppm ICP Standard Solution
GFS ChemicalsConcentration 10,000 +/- 100 ug/ml Matrix: <5% HNO3 NIST Traceable
-
TEST Turbidity (on Analite probe) 100 NTU/FNU Turbidity (on ISO 7027 Instrument) 100 FNU Absorbance at 455nm (10mm pathlength) Lot Number of Baseline Material
-
In-Spec® UV Standard #30
GFS ChemicalsNIST Traceable, non-toxic reference material for the UV spectrophotometer. Full UV scan reported with a typical absorbance at 300 nm in 10 mm pathlength being approximately 0.754.
-
-
Concentration (as chlorate) 1,000 +/- 10 ug/mL Matrix: sodium chlorate, water
-
TEST Turbidity (AQ4500) EPA mode Turbidity (AQ4500) ISO Neph. mode Turbidity (AQ4500) IR Ratio mode Thermo Electron AQ4500 serial number Instrument calibration date Formazin Concentrate (
-
TEST Turbidity (on Analite/ISO 7027 probe) 400 NTU Absorbance at 455nm (10mm pathlength) Lot Number of Baseline Material
-
In-Spec® Visible Standard 0.05
GFS ChemicalsNIST Traceable, non-toxic reference material for the visible spectrophotometer. Full visible scan reported with a typical absorbance at 600 nm in 10 mm pathlength being approximately 0.034.
-
Iron 1,000 ppm ICP Standard Solution
GFS ChemicalsConcentration 1,000 +/- 10 ug/ml Matrix: 5% Nitric acid NIST Traceable
-
TEST Turbidity (on LaMotte 2020) 100 NTU +/-1 Absorbance at 455nm (10mm pathlength) Lot Number of Baseline Material
-
TEST Turbidity (on Hach 43900/XR) 180 NTU +/- 2 Absorbance at 455nm (10mm pathlength) Lot Number of Baseline Material
-
For Endress and Hauser, Reagecon Diagnostic and Hach 2100 AN IS turbidimeters. TEST Turbidity (on Hach 2100 AN/IS) 4000 NTU Absorbance at 455 nm (10mm pathlength) 3.26-3.50 Lot Number of Baseline Material
-
-
TEST Turbidity (on Analite/ISO 7027 probe) 40 NTU Absorbance at 455nm (50mm pathlength) Lot Number of Baseline Material
-
AMCO Clear® Turbidity Standard, 0.6 NTU
GFS ChemicalsFor all EPA 180.1 turbidimeters. TEST Turbidity 0.6 NTU +/- 0.02 Absorbance at 455nm (100mm pathlength) Lot Number of Baseline Material
-
Iron, 1 ppm, Standard Solution
GFS ChemicalsNFPA#: 1-0-1 Specific Gravity: 1.010 AA, colorimetric or volumetric standard
-
Iridium 1,000 ppm ICP Standard Solution
GFS ChemicalsConcentration 1,000 +/- 10 ug/ml Matrix: 20% Hydrochloric acid NIST Traceable
-
Concentration (as chlorite) 1,000 +/- 10 ug/mL Matrix: sodium chlorite, water
-
AMCO Clear® Turbidity Standard, 0.1 NTU
GFS ChemicalsFor all EPA 180.1 turbidimeters. TEST Turbidity 0.1 NTU +/- 0.02 Absorbance at 455nm (100mm pathlength) Lot Number of Baseline Material
-
Copper 10,000 ppm ICP Standard Solution
GFS ChemicalsConcentration 10,000 +/- 100 ug/ml Matrix: 5% Nitric acid NIST Traceable
-
TEST Turbidity (OBS sensor inst) 4000 TU +/- 40 Absorbance at 455nm (10mm pathlength) Lot Number of Baseline Material
-
TEST Turbidity (Hach 2100N/AN and IS meters) 1.0 NTU Absorbance at 455nm (100mm pathlength) Lot Number of Baseline Material
-
AMCO Clear® Turbidity Standard, 0.5 EBC
GFS ChemicalsTEST Turbidity (Haze) 0.5 EBC +/- 0.05 Absorbance at 455nm (100mm pathlength) Lot Number of Baseline Material
-
-
AMCO Clear® Turbidity Standard, 30 NTU
GFS ChemicalsTEST Turbidity 30 NTU +/- 0.3 Absorbance at 455nm (100mm pathlength) Lot Number of Baseline Material
-
Potassium 1,000 ppm ICP Standard Solution
GFS ChemicalsConcentration 1,000 +/- 10 ug/ml Matrix: 5% Nitric acid NIST Traceable
-
In-Spec® Visible Standard 0.1
GFS ChemicalsNIST Traceable, non-toxic reference material for the visible spectrophotometer. Full visible scan reported with a typical absorbance at 600 nm in 10 mm pathlength being approximately 0.072.
-
Concentration (as Cl) 1,000 +/- 10 ug/mL Matrix: KCl, water
-
Sulfur 1,000 ppm ICP Standard Solution
GFS ChemicalsConcentration 1,000 +/- 10 ug/ml Matrix: Ammonium sulfate in water NIST Traceable
-
Gold 10,000 ppm ICP Standard Solution
GFS ChemicalsConcentration 10,000 +/- 100 ug/ml Matrix: 20% Hydrochloric acid NIST Traceable
-
In-Spec® Visible Standard 4.0
GFS ChemicalsNIST Traceable, non-toxic reference material for the visible spectrophotometer. Full visible scan reported with a typical absorbance at 600 nm in 10 mm pathlength being approximately 2.917.
-
In-Spec® UV Standard #3
GFS ChemicalsNIST Traceable, non-toxic reference material for the UV spectrophotometer. Full UV scan reported with a typical absorbance at 300 nm in 10 mm pathlength being approximately 0.079.