4 L, Cubitainer®
-
Sodium Citrate, 40% (w/v), Volumetric
Reagents®Concentration: 40% w/v Composition: Water 68.03%, Sodium Citrate Dihydrate 31.97% Boiling Point: Approximately 100°C Density: 1.25 Color: Colorless liquid Physical State: Liquid pH Range: 7 to 9 Solubility Information: Miscible Shelf Life: 12 Months Storage: Ambient DOT: NOT REGULATED.
-
Ricca Hydrochloric Acid
Ricca ChemicalThe Ricca Chemical hydrochloric acid with a composition of 93.88% isopropyl alcohol, 3.86% water and 2.26% hydrochloric acid, is used to neutralize alkaline agents. It is suitable for use in food, textile, metal, photographic and rubber industries. It can be stored at a temperature of 15 to 30…
-
Water, ACS Reagent Grade, ASTM Type I, ASTM Type II
Ricca ChemicalFormula: H2O Formula Weight: 18.02 CAS Number: 7732-18-5 Description: Packaged in plastic containers
-
Isopropyl Alcohol, AR (ACS)
Avantor - Macron Fine Chemicals™For Histological Use Formula: (2-Propanol) CH3CH(OH)CH3 Formula Weight: 60.10 CAS Number: 67-63-0
-
Ricca 20% (w/v) Barium Chloride
Ricca ChemicalBarium chloride is an inorganic compound with the formula BaCl2. It is one of the most common water-soluble salts of barium. Like most other water-soluble barium salts, it is white, highly toxic, and imparts a yellow-green coloration to a flame. It is also hygroscopic, converting first to the…
-
HARLECO® Wright Stain Solution
MilliporeSigmaFormula: Mixture Formula Weight: N/A CAS Number: Synonym(s): Hematology Stain Description: General Product Use: Polychromic stain for peripheral blood and bone marrow smears. Used for red blood cell morphology and white blood cell differentiation.
-
Water, Deionized, ASTM Type I, ACS Grade
chemForce® (powered by Thomas Scientific)Meets ASTM Type I specifications. Meets ACS specifications for reagent water. Suitable for most laboratory applications.
-
Ricca 0.01 Normal Sodium Thiosulfate
Ricca ChemicalSodium thiosulfate is an inorganic compound with the formula Na2S2O3·xH2O. Typically it is available as the white or colorless pentahydrate, Na2S2O3·5H2O. The solid is an efflorescent crystalline substance that dissolves well in water.
-
Hydrochloric Acid, 1.00 Normal
Ricca ChemicalFormula: HCl Formula Weight: 36.46 CAS Number: 7647-01-0 Synonym(s): N/A
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
TitriPUR® Sodium hydroxide solution
MilliporeSigmaMolecular Formula: HNaO Molecular Weight: 40.0 Linear Structural Formula: NaOH MDL Number: MFCD00003548 Density: 1.04 g/cm3 at 20 C Legal Information: Titripur is a registered trademark of Merck KGaA, Darmstadt, Germany
-
Ricca 0.5% (w/v) Starch Indicator
Ricca ChemicalThe Ricca Chemical starch indicator with a composition of 99.38% water, 0.50% starch, soluble and 0.13% salicylic acid, is suitable for use in detection of iodine. It can be stored at a temperature of 15 to 30 degree C. Application: For Iodometric Titrations
-
Sodium Hydroxide, 30% (w/v)
Ricca ChemicalWe offer the largest offering of EPA solutions and standards available. Practically every solution and standard you could need to satisfy the EPA requirements are readily available. This product is certified as a reagent for the following test methods: Reference: EPA Method:…
-
Buffer, Reference Standard, pH 3.00 ± 0.01 at 25°C
Ricca ChemicalpH made Easy. Everything you need and want in a pH Buffer. NIST Traceability. Consistent, reliable performance. The tightest specification (+/- 0.01 pH unit) on all buffers. Long Expiration dates. Temperature conversion charts for all Buffers up to pH 11. Multiple sizes to fit your usage and budget…
-
Titripur® Sodium Thiosulfate Solution
MilliporeSigmaSynonyms: Antichlor Density: 1.01 g/cm3 at 20 C Legal Information: Titripur is a registered trademark of Merck KGaA, Darmstadt, Germany
-
Acetone, ACS Reagent
Reagents®Composition: Acetone 100% Assay Percent: Minimum 99.5% Grade: ACS Reagent Boiling Point: 56.05°C at 1013.25 hPa CAS Number: 67-64-1 Density: 0.8 Chemical Formula: (CH3)2CO Molecular Weight: 58.08 g/mol Melting Point: -94.7°C Color: Colorless…
-
Sulfuric Acid, 2.0N
chemForce® (powered by Thomas Scientific)Harmonized #: 2807.00.0000 0000 Shelf Life (months): 36 Specific Gravity: 1.06 DOT: UN3264, CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S. (SULFURIC ACID), 8, III Appearance: Colorless Physical State: Liquid Flash Point: Not applicable Solubility: Miscible …
-
Hydrochloric Acid, 0.10N
chemForce® (powered by Thomas Scientific)Harmonized #: 2806.10.0000 0000 Shelf Life (months): 24 Specific Gravity: 1.00 DOT: Not regulated Appearance: Colorless Physical State: Liquid Flash Point: Not applicable Solubility: Miscible Storage Temperature: Ambient Storage Code: General
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Potassium Hydroxide, 0.1N in Methanol Volumetric Solution, BAKER ANALYZED…
Avantor - J.T.Baker®Formula: KOH Formula Weight: 56.11 CAS Number: 1310-58-3 Specific Gravity: 1L = .80 Kg Flash Point: 12° C
-
Sodium Chloride, 0.9% (w/v) Aqueous Solution
Ricca ChemicalFormula: NaCl Formula Weight: 58.44 CAS Number: 7647-14-5 Synonym(s): Salt; Halite Description: Normal Saline, Suitable for Blood Bank
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Ricca 0.1 Normal (N/10) Potassium Hydroxide
Ricca ChemicalPotassium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).
-
Ricca 0.282 Normal, 1 mL = 10 mg Cl Silver Nitrate
Ricca ChemicalSilver Nitrate solutions are used almost exclusively for the determination of Halides, i.e., Chloride, Bromide and Iodide. Silver Nitrate solutions can be standardized potentiometrically, or by using the Mohr method or the Volhard method.
-
Ricca Electrode Cleaning Solution
Ricca ChemicalElectrode cleaning solution for removal of membrane/junction protein deposits. Application: For Removal of Membrane/Junction Protein Deposits
-
Ricca Phosphoric Acid
Ricca ChemicalThe Ricca Chemical 50% v/v phosphoric acid is a very useful chemical compound that is used for a variety of products including fertilizers, detergents and other household cleaning products. It can alsi be used as a food preservative in soft drinks and processed food.
-
-
Glycerin, ACS Reagent Grade
Ricca ChemicalGrade: ACS Package Size: 4L Package Type: Poly bottle, natural
-
Sodium Thiosulfate, 0.10N
chemForce® (powered by Thomas Scientific)Harmonized #: 2832.30.0000 1000 Shelf Life (months): 24 Specific Gravity: 1.01 DOT: Not regulated Appearance: Colorless Physical State: Liquid Flash Point: Not applicable Solubility: Miscible Storage Temperature: Ambient Storage Code: General
-
Ricca 0.600 Normal Hydrochloric Acid
Ricca ChemicalHydrochloric Acid is a strong acid in terms of chemical ionization, and solutions of it can be assayed with a standardized solution of a strong base, such as Sodium Hydroxide. The endpoint can be determined potentiometrically or by using a pH indicator. The selection of the indicator used depends…
-
Ricca Saturated Potassium Chloride, Approximately 4 Molar
Ricca ChemicalPotassium chloride is a metal halide salt composed of potassium and chlorine. It is odorless and has a white or colorless vitreous crystal appearance. The solid dissolves readily in water, and its solutions have a salt-like taste. Potassium chloride can be obtained from ancient dried lake deposits.