4 L, Bottle, Poly
-
Potassium Hydroxide, 2.0N, Standardized
Reagents®Concentration: 2N in Methanol Composition: Water 99.89%, Potassium Hydroxide 0.11% Density: 0.9 Color: Colorless liquid Physical State: Liquid Flash Point: 12°C pH Range: 14 Solubility Information: Miscible Shelf Life: 12 Months Storage: Ambient …
-
Sodium Citrate, 40% (w/v), Volumetric
Reagents®Concentration: 40% w/v Composition: Water 68.03%, Sodium Citrate Dihydrate 31.97% Boiling Point: Approximately 100°C Density: 1.25 Color: Colorless liquid Physical State: Liquid pH Range: 7 to 9 Solubility Information: Miscible Shelf Life: 12 Months Storage: Ambient DOT: NOT REGULATED.
-
Ricca Hydrochloric Acid
Ricca ChemicalThe Ricca Chemical hydrochloric acid with a composition of 93.88% isopropyl alcohol, 3.86% water and 2.26% hydrochloric acid, is used to neutralize alkaline agents. It is suitable for use in food, textile, metal, photographic and rubber industries. It can be stored at a temperature of 15 to 30…
-
Ferric Chloride
Ricca ChemicalFormula: FeCl3•6H2O Formula Weight: 270.30 Description: 0.025% (w/v) Aqueous Solution
-
Water, ACS Reagent Grade, ASTM Type I, ASTM Type II
Ricca ChemicalFormula: H2O Formula Weight: 18.02 CAS Number: 7732-18-5 Description: Packaged in plastic containers
-
Isopropyl Alcohol, AR (ACS)
Avantor - Macron Fine Chemicals™For Histological Use Formula: (2-Propanol) CH3CH(OH)CH3 Formula Weight: 60.10 CAS Number: 67-63-0
-
Ricca 20% (w/v) Barium Chloride
Ricca ChemicalBarium chloride is an inorganic compound with the formula BaCl2. It is one of the most common water-soluble salts of barium. Like most other water-soluble barium salts, it is white, highly toxic, and imparts a yellow-green coloration to a flame. It is also hygroscopic, converting first to the…
-
HARLECO® Wright Stain Solution
MilliporeSigmaFormula: Mixture Formula Weight: N/A CAS Number: Synonym(s): Hematology Stain Description: General Product Use: Polychromic stain for peripheral blood and bone marrow smears. Used for red blood cell morphology and white blood cell differentiation.
-
Ricca 0.01 Normal Sodium Thiosulfate
Ricca ChemicalSodium thiosulfate is an inorganic compound with the formula Na2S2O3·xH2O. Typically it is available as the white or colorless pentahydrate, Na2S2O3·5H2O. The solid is an efflorescent crystalline substance that dissolves well in water.
-
Hydrochloric Acid, 1.00 Normal
Ricca ChemicalFormula: HCl Formula Weight: 36.46 CAS Number: 7647-01-0 Synonym(s): N/A
-
Ricca 18 Normal Sulfuric Acid
Ricca ChemicalSulfuric acid or sulphuric acid, known in antiquity as oil of vitriol, is a mineral acid composed of the elements sulfur, oxygen and hydrogen, with the molecular formula H2SO4. It is a colorless, odorless and viscous liquid that is miscible with water.
-
Calcium Carbonate, 0.02M, Standardized
Reagents®Concentration: 0.02M Composition: Water 99.72%, Calcium Carbonate 0.20%, Hydrochloric Acid 0.08% Boiling Point: 100°C Density: 1 Melting Point: 0.0°C Color: Colorless liquid Physical State: Liquid Solubility Information: Miscible Shelf Life: 24 Months Storage: Ambient DOT: NOT REGULATED.
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Ricca 0.5% (w/v) Starch Indicator
Ricca ChemicalThe Ricca Chemical starch indicator with a composition of 99.38% water, 0.50% starch, soluble and 0.13% salicylic acid, is suitable for use in detection of iodine. It can be stored at a temperature of 15 to 30 degree C. Application: For Iodometric Titrations
-
Acetone, AR (ACS)
Avantor - Macron Fine Chemicals™Formula: CH3COCH3 Formula Weight: 58.08 CAS Number: 67-64-1
-
Sodium Hydroxide, 30% (w/v)
Ricca ChemicalWe offer the largest offering of EPA solutions and standards available. Practically every solution and standard you could need to satisfy the EPA requirements are readily available. This product is certified as a reagent for the following test methods: Reference: EPA Method:…
-
Buffer Standard, pH 4.01
ExaxolMeets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of 0.01 pH units Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
GR ACS o-Phosphoric Acid 85% W/W
MilliporeSigmaSynonyms: Phosphoric acid; Orthophosphoric Acid; Orthophosphoric acid Molecular Formula: H3O4P Molecular Weight: 98.0 Linear Structural Formula: H3PO4 MDL Number: MFCD00011340 Melting Point: ~40 C (lit.) Density: 1.685 g/mL at 25 C (lit.) …
-
Acetone, ACS Reagent
Reagents®Composition: Acetone 100% Assay Percent: Minimum 99.5% Grade: ACS Reagent Boiling Point: 56.05°C at 1013.25 hPa CAS Number: 67-64-1 Density: 0.8 Chemical Formula: (CH3)2CO Molecular Weight: 58.08 g/mol Melting Point: -94.7°C Color: Colorless…
-
Ricca 10 ppm Na Sodium Standard
Ricca ChemicalThe Ricca Chemical sodium standard with a composition of 100.00% water and 0.00% sodium chloride, acts as a reducing agent as well as a catalyst in ion analysis. It is used in atomic absorption spectrometry. It can be stored at a temperature of 15 to 30 degree C.
-
Sodium Hydroxide, 50%(w/w) Solution, BAKER ANALYZED Reagent
Avantor - J.T.Baker®Formula: NaOH Formula Weight: 40.00 CAS Number: 1310-73-2 Synonym(s): Sodium Hydroxide, 5N
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Acetone, Laboratory Plus
Honeywell Burdick & JacksonMeets ACS Specifications Suggested Applications: Organic Synthesis, Prep-LC, Glassware cleaning, ACS General Laboratory Use Synonyms: 2-Propanone, Dimethyl ketone Structural Formula: (CH3)2CO CAS number: 67-64-1 Hazard Class: 3 Package Group: II UN number: UN1090
-
Potassium Hydroxide, 0.1N in Methanol Volumetric Solution, BAKER ANALYZED…
Avantor - J.T.Baker®Formula: KOH Formula Weight: 56.11 CAS Number: 1310-58-3 Specific Gravity: 1L = .80 Kg Flash Point: 12° C
-
Sodium Chloride, 0.9% (w/v) Aqueous Solution
Ricca ChemicalFormula: NaCl Formula Weight: 58.44 CAS Number: 7647-14-5 Synonym(s): Salt; Halite Description: Normal Saline, Suitable for Blood Bank
-
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Conductivity Standard 5000 µS/cm
Reagents®Composition: Water 99.72%, Potassium Chloride 0.28% Boiling Point: 100°C Density: 1 Melting Point: 0°C Color: Colorless liquid Physical State: Liquid pH Range: 5.4 to 8.6 Solubility Information: Miscible Shelf Life: 12 Months Storage: Ambient Conductivity/TDS Standard Range:…
-
Ricca 0.1 Normal (N/10) Potassium Hydroxide
Ricca ChemicalPotassium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).
-
Ricca 0.282 Normal, 1 mL = 10 mg Cl Silver Nitrate
Ricca ChemicalSilver Nitrate solutions are used almost exclusively for the determination of Halides, i.e., Chloride, Bromide and Iodide. Silver Nitrate solutions can be standardized potentiometrically, or by using the Mohr method or the Volhard method.
-
Ricca Eluent Solution
Ricca ChemicalThe Ricca Chemical eluent solution with a composition of 99.95% water, 0.02% sodium bicarbonate and 0.02% sodium carbonate, is suitable for use in ion chromatography. It can be stored at a temperature of 15 to 30 degree C. Application: For Ion Chromatography