4 L, Solutions, Cubitainer®
-
-
-
Barium Chloride, 12% (w/v), Volumetric
Reagents®Concentration: 12% w/v Composition: Water 88.98%, Barium Chloride Dihydrate 11.02% Boiling Point: Approximately 101°C Density: 1.09 Melting Point: Approximately 0°C Color: Colorless liquid Physical State: Liquid pH Range: 5.2 to 8.2 Solubility Information: Miscible Shelf Life: 24…
-
EDTA Titrant, 0.2M, Standardized
Reagents®Concentration: 0.2M Composition: Water 92.55%, Ethylenediaminetetraacetic Acid (EDTA), Disodium Salt, Dihydrate 7.45% Boiling Point: Approximately 100°C Density: 1.04 Melting Point: Approximately 0°C Color: Colorless liquid Physical State: Liquid Solubility Information: Miscible Shelf…
-
Sulfuric Acid 0.250N
ExaxolThe Exaxol 0.25N sulfuric acid features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only Tested in an ISO 17025 accredited laboratory Standardized at 25 deg C to…
-
The Exaxol acetate buffer features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only
-
Ricca Surface Cleaning Solutions
Ricca ChemicalThis product is intended for laboratory cleaning and disinfection purposes and is typically used for disinfection of surfaces. All components of this product are filtered as part of the manufacturing process. The residue after evaporation is typically 0.001% (10 ppm) maximum at the time of…
-
Ricca 30% (w/v) Sodium Chloride
Ricca ChemicalSodium chloride, commonly known as salt, is an ionic compound with the chemical formula NaCl, representing a 1:1 ratio of sodium and chloride ions. With molar masses of 22.99 and 35.45 g/mol respectively, 100 g of NaCl contains 39.34 g Na and 60.66 g Cl.
-
Ricca Copper Sulfate
Ricca ChemicalThe minimum requirement of the American Association of Blood Banks (AABB) and the Food and Drug Administration (FDA) for suitable blood donors is 12.5 g/dL hemoglobin level or 38% packed cell volume (hematocrit) for fingerstick or venipuncture sampling methods. Copper Sulfate Solution, Specific…
-
The Ricca Chemical reagent is helpful to carry out or test different kinds of chemical reactions in laboratories.
-
TitriPUR® Sodium hydroxide solution
MilliporeSigmaMolecular Formula: HNaO Molecular Weight: 40.0 Linear Structural Formula: NaOH MDL Number: MFCD00003548 Density: 1.04 g/cm3 at 20 C Legal Information: Titripur is a registered trademark of Merck KGaA, Darmstadt, Germany
-
Sodium Hydroxide, 30% (w/v)
Ricca ChemicalWe offer the largest offering of EPA solutions and standards available. Practically every solution and standard you could need to satisfy the EPA requirements are readily available. This product is certified as a reagent for the following test methods: Reference: EPA Method:…
-
Ricca 5% (v/v) Hydrochloric Acid
Ricca ChemicalHydrochloric Acid is a strong acid in terms of chemical ionization, and solutions of it can be assayed with a standardized solution of a strong base, such as Sodium Hydroxide. The endpoint can be determined potentiometrically or by using a pH indicator. The selection of the indicator used depends…
-
EDTA Titrant, 0.1M, Standardized
Reagents®Concentration: 0.100M Composition: Water 96.34%, Ethylenediaminetetraacetic Acid (EDTA), Disodium Salt, Dihydrate 3.66% Boiling Point: Approximately 100°C Density: 1.02 Melting Point: Approximately 0°C Color: Colorless liquid Physical State: Liquid Solubility Information: Miscible …
-
Ricca 0.5% (w/v) Starch Indicator
Ricca ChemicalThe Ricca Chemical starch indicator with a composition of 99.38% water, 0.50% starch, soluble and 0.13% salicylic acid, is suitable for use in detection of iodine. It can be stored at a temperature of 15 to 30 degree C. Application: For Iodometric Titrations
-
The Ricca Chemical TCLP extraction fluid with a composition of 99.40% water and 0.60% acetic acid, is suitable for use in EPA 1311 toxicity characteristic leaching procedure (TCLP) testing which ensures safety of the environment. It can be stored at a temperature of 15 to 30 degree C. Application:…
-
Conductivity Standard 500 µS/cm
Reagents®Composition: Water 99.97%, Potassium Chloride 0.03% Boiling Point: 100°C Density: 1 Melting Point: 0°C Color: Colorless liquid Physical State: Liquid pH Range: 5.4 to 8.6 Solubility Information: Miscible Shelf Life: 12 Months Storage: Ambient Conductivity/TDS Standard Range:…
-
Sulfuric Acid 12.0N
ExaxolThe Exaxol 12N sulfuric acid features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only Tested in an ISO 17025 accredited laboratory Standardized at 25 deg C to…
-
Ricca Buffer for Fluoride & Citrate - Acetate
Ricca ChemicalCitrate-Acetate Buffer for fluoride, ionic strength adjustor for ISE electrodes.
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Sodium Thiosulfate 0.0250 N
ExaxolThe Exaxol 0.025N sodium thiosulfate features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only Tested in an ISO 17025 accredited laboratory Standardized at 25 deg…
-
Ricca 25% v/v Sulfuric Acid
Ricca ChemicalSulfuric acid or sulphuric acid, known in antiquity as oil of vitriol, is a mineral acid composed of the elements sulfur, oxygen and hydrogen, with the molecular formula H2SO4. It is a colorless, odorless and viscous liquid that is miscible with water.
-
Ricca 0.01 N Silver Nitrate
Ricca ChemicalSilver Nitrate solutions are used almost exclusively for the determination of Halides, i.e., Chloride, Bromide and Iodide. Silver Nitrate solutions can be standardized potentiometrically, or by using the Mohr method or the Volhard method.
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Ricca 50% (w/v) Neutralized Potassium Fluoride
Ricca ChemicalPotassium fluoride is the chemical compound with the formula KF. After hydrogen fluoride, KF is the primary source of the fluoride ion for applications in manufacturing and in chemistry. It is an alkali halide and occurs naturally as the rare mineral carobbiite.
-
Sodium Hydroxide 0.500N
ExaxolThe Exaxol 0.5N sodium hydroxide features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only Tested in an ISO 17025 accredited laboratory Standardized at 25 deg C…
-
Sodium Hydroxide 0.02N
ExaxolThe Exaxol 0.02N sodium hydroxide features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only Tested in an ISO 17025 accredited laboratory Standardized at 25 deg C…
-
Concentration: 0.1N Composition: Water 98.73%, Potassium Bromide 0.99%, Potassium Bromate 0.28% Boiling Point: Approximately 100°C Density: 1.01 Melting Point: Approximately 0°C Color: Colorless liquid Physical State: Liquid Solubility Information:…
-
Sulfuric Acid 0.1N
ExaxolThe Exaxol 0.1N sulfuric acid features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only Tested in an ISO 17025 accredited laboratory Standardized at 25 deg C to…