4 L, Solutions
-
-
Conductivity Standards
chemForce® (powered by Thomas Scientific)Harmonized #: 2501.00.0000 0000 Shelf Life (months): 12 Specific Gravity: 1.00 DOT: Not regulated Appearance: Colorless Physical State: Liquid Flash Point: Not applicable Solubility: Miscible Storage Temperature: Ambient Storage Code: General
-
Sodium Hydroxide, Solution, 1.0 N
GFS ChemicalsNaOH CAS#: 1310-73-2 F.W.: 40.00 NFPA#: 3-0-2 Specific Gravity: 1.040 1 mol/L
-
The LabChem 0.0375 M sodium thiosulfate dissolves easily in water and is mainly used in laboratory and manufacturing factories. Application: For Laboratory and Manufacturing Use Only
-
-
Ricca 20% (w/v) Barium Chloride
Ricca ChemicalBarium chloride is an inorganic compound with the formula BaCl2. It is one of the most common water-soluble salts of barium. Like most other water-soluble barium salts, it is white, highly toxic, and imparts a yellow-green coloration to a flame. It is also hygroscopic, converting first to the…
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
TitriPUR® Sodium hydroxide solution
MilliporeSigmaMolecular Formula: HNaO Molecular Weight: 40.0 Linear Structural Formula: NaOH MDL Number: MFCD00003548 Density: 1.04 g/cm3 at 20 C Legal Information: Titripur is a registered trademark of Merck KGaA, Darmstadt, Germany
-
The LabChem 2-3% w/v sodium hypochlorite solution in liquid form, is soluble in water. Application: For Laboratory and Manufacturing Use Only
-
Ricca 0.5% (w/v) Starch Indicator
Ricca ChemicalThe Ricca Chemical starch indicator with a composition of 99.38% water, 0.50% starch, soluble and 0.13% salicylic acid, is suitable for use in detection of iodine. It can be stored at a temperature of 15 to 30 degree C. Application: For Iodometric Titrations
-
Sodium Hydroxide, 30% (w/v)
Ricca ChemicalWe offer the largest offering of EPA solutions and standards available. Practically every solution and standard you could need to satisfy the EPA requirements are readily available. This product is certified as a reagent for the following test methods: Reference: EPA Method:…
-
Titripur® Sodium Thiosulfate Solution
MilliporeSigmaSynonyms: Antichlor Density: 1.01 g/cm3 at 20 C Legal Information: Titripur is a registered trademark of Merck KGaA, Darmstadt, Germany
-
Ricca 10 ppm Na Sodium Standard
Ricca ChemicalThe Ricca Chemical sodium standard with a composition of 100.00% water and 0.00% sodium chloride, acts as a reducing agent as well as a catalyst in ion analysis. It is used in atomic absorption spectrometry. It can be stored at a temperature of 15 to 30 degree C.
-
Ricca 5% (w/v) Sulfosalicylic Acid
Ricca ChemicalThe Ricca Chemical sulfosalicylic acid with a composition of 95.15% water, 4.85% 5-sulfosalicylic acid dihydrate, is suitable for use in urine protein content determination. It is used in wide range of industries. It can be stored at a temperature of 15 to 30 degree C.
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Triethanolamine
Reagents®Composition: Triethanolamine 100% Boiling Point: 335°C CAS Number: 102-71-6 Density: 1.12 Chemical Formula: C6H15NO3 Molecular Weight: 149.19 g/mol Melting Point: 21°C Color: Colorless to pale yellow liquid Physical State: Liquid Flash Point: 179°C Refractive Index: 1.484 to…
-
The LabChem 0.1N ferrous ammonium sulfate solution in liquid form, is soluble in water. It is non-flammable and has odorless odor. Application: For Laboratory and Manufacturing Use Only
-
You will be hard-pressed to find another company that offers tighter specs and a wider range of conductivity standards. Tested in an ISO 17025 Accredited Laboratory.
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Conductivity Standard 5000 µS/cm
Reagents®Composition: Water 99.72%, Potassium Chloride 0.28% Boiling Point: 100°C Density: 1 Melting Point: 0°C Color: Colorless liquid Physical State: Liquid pH Range: 5.4 to 8.6 Solubility Information: Miscible Shelf Life: 12 Months Storage: Ambient Conductivity/TDS Standard Range:…
-
LabChem 5% w/v Potassium Iodide
LabchemThe LabChem 5% w/v potassium iodide in liquid form, is soluble in water. Application: For Laboratory and Manufacturing Use Only
-
Silver Nitrate 0.250 N
ExaxolThe Exaxol 0.250 N silver nitrate is an inorganic chemical compound which acts as an antibacterial agent. It is used to treat skin infections around wounds and burns. Silver nitrate is used in analytical chemistry experiments. It is tested at ISO 17025 accredited laboratory. Application: For…
-
Ricca Eluent Solution
Ricca ChemicalThe Ricca Chemical eluent solution with a composition of 99.95% water, 0.02% sodium bicarbonate and 0.02% sodium carbonate, is suitable for use in ion chromatography. It can be stored at a temperature of 15 to 30 degree C. Application: For Ion Chromatography
-
Ricca Electrode Cleaning Solution
Ricca ChemicalElectrode cleaning solution for removal of membrane/junction protein deposits. Application: For Removal of Membrane/Junction Protein Deposits
-
The LabChem 5% w/v sodium hypochlorite solution in liquid form, is soluble in water. Application: For Laboratory and Manufacturing Use Only
-
Ricca Phosphoric Acid
Ricca ChemicalThe Ricca Chemical 50% v/v phosphoric acid is a very useful chemical compound that is used for a variety of products including fertilizers, detergents and other household cleaning products. It can alsi be used as a food preservative in soft drinks and processed food.
-
-
Ricca Saturated Potassium Chloride, Approximately 4 Molar
Ricca ChemicalPotassium chloride is a metal halide salt composed of potassium and chlorine. It is odorless and has a white or colorless vitreous crystal appearance. The solid dissolves readily in water, and its solutions have a salt-like taste. Potassium chloride can be obtained from ancient dried lake deposits.
-
The LabChem 4 pH acetate buffer in slight vinegar odor, is perfect for chlorine and iodine. Application: For Laboratory and Manufacturing Use Only
-
Ricca 10% (v/v) Ammonium Hydroxide
Ricca ChemicalThe Ricca Chemicals 10% (v/v) ammonium hydroxide can be used in manufacturing rayon and other textiles, pharmaceuticals, paper, rubber, detergents, inks and other organic chemicals. This chemical is ideal for photographic development, metal extracting and water purification. It can be used as a…
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…