4 L, Solutions, S, Solutions
-
The LabChem 0.2N sulfuric acid in liquid form, is soluble in water. it is perfect for all laboratory use. Application: For Laboratory and Manufacturing Use Only
-
Silver Nitrate, 0.10N
chemForce® (powered by Thomas Scientific)Harmonized #: 2843.21.0000 0000 Shelf Life (months): 24 Specific Gravity: 1.01 DOT: Not regulated Appearance: Colorless Physical State: Liquid Flash Point: Not applicable Solubility: Miscible Storage Temperature: Ambient Storage Code: General
-
Ricca Sodium Hypochlorite Solution
Ricca ChemicalThe Ricca Chemical sodium hypochlorite solution with a composition of 94% water and 6.00% sodium hypochlorite, acts as a bleaching or disinfectant agent. It can be stored at a temperature of 15 to 30 degree C.
-
The LabChem 0.1N silver nitrate in liquid form, is soluble in water. It is non-flammable and has odorless odor. Application: For Laboratory and Manufacturing Use Only
-
Ricca 0.00800 Normal Sodium Lauryl Sulfate
Ricca ChemicalThe Ricca Chemicals sodium lauryl sulfate with a composition of 99.77% water, 0.23% sodium lauryl sulfate, is suitable for use in laboratory use only. It can be stored at a temperature of 15 to 30 degree C.
-
Sodium Thiosulfate, 0.20N, Standardized
Reagents®Concentration: 0.2N Composition: Water 95.02%, Sodium Thiosulfate Pentahydrate 4.84%, Proprietary 0.09%, Sodium Carbonate 0.05% Boiling Point: Approximately 100°C Density: 1.03 Melting Point: Approximately 0°C Color: Colorless liquid Physical State: Liquid pH Range: 6 to 8.4 …
-
Synthetic Fresh Water, Hard
Ricca Chemical415 ppm TDS as Fresh Water Ions, 160 - 180 mg/L Hardness as CaCO3
-
Sodium Hydroxide Solution, 50% W/W
GFS ChemicalsNaOH CAS#: 1310-73-2 F.W.: 40.00 Suitable for Kjeldahl use.
-
Ricca Scott's Bluing Reagent (Scott's Tapwater Substitute)
Ricca ChemicalThe Ricca Chemical 1 Liter Scott's bluing reagent is used for the preparation of nuclear hematoxylin stain in cytology and histology. Application: Bluing Agent For Nuclear Hematoxylin Stain
-
The LabChem 0.0375 M sodium thiosulfate dissolves easily in water and is mainly used in laboratory and manufacturing factories. Application: For Laboratory and Manufacturing Use Only
-
Silver Nitrate, Solution, 0.0141 N
GFS ChemicalsAgNO3 CAS#: 7761-88-8 F.W.: 169.89 0.0141 mol/L. 1 ml = 0.5 mg Cl
-
Concentration: 0.05N Composition: Water 98.47%, Sodium Thiosulfate Pentahydrate 1.39%, Proprietary 0.09%, Sodium Carbonate 0.05% Boiling Point: 100°C Density: 1.01 Melting Point: 0.0°C Color: Colorless liquid Physical State: Liquid pH Range: 6 to 8.4 Solubility Information: Miscible …
-
Ricca 10% (w/v) Sodium Carbonate
Ricca ChemicalSodium carbonate refers to a family of inorganic compounds with the formula Na2CO3?, where x can range from 0 to 10. All forms are white, odorless, water-soluble salts that yield alkaline solutions in water. Historically, it was extracted from the ashes of plants grown in sodium-rich soils.
-
Sulfuric Acid 2.0N
ExaxolThe Exaxol 2N sulfuric acid features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only Tested in an ISO 17025 accredited laboratory Standardized at 25 deg C to…
-
The LabChem 1.0N sodium carbonate in liquid form, is soluble in water. it is perfect for all laboratory use. Application: For Laboratory and Manufacturing Use Only
-
Ricca 25% (w/v) Sodium Chloride
Ricca ChemicalThe Ricca Chemical sodium chloride with a composition of 78.45% water and 21.55% sodium chloride, is suitable for use in plastic, paper, rubber, glass, soap, detergent and dye industries. It also plays a major role in medical treatments. It can be stored at a temperature of 15 to 30 degree C.
-
Sulfuric Acid 5.0N
ExaxolThe Exaxol 5N sulfuric acid features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only Tested in an ISO 17025 accredited laboratory Standardized at 25 deg C to…
-
Ricca 1.00 Molar Sodium Chloride
Ricca ChemicalThe Ricca Chemical sodium chloride with a composition of 94.38% water and 5.62% sodium chloride, is suitable for use in plastic, paper, rubber, glass, soap, detergent and dye industries. It also plays a major role in medical treatments. It can be stored at a temperature of 15 to 30 degree C.
-
Sulfuric Acid 25% v/v
ExaxolThe Exaxol 25% sulfuric acid features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only
-
Ricca 1% (w/v) Starch Indicator
Ricca ChemicalStarch solutions are used as indicators in the detection of the endpoint of titrations involving Iodine solutions. Starch reacts with Iodine in the presence of Iodide ion to form an intensely colored blue complex, which is visible at very low concentrations of Iodine, making it a very good…
-
Ricca 12.0 Normal Sodium Hydroxide
Ricca ChemicalThe Ricca Chemical sodium hydroxide with a composition of 64.75% water and 35.25% sodium hydroxide, is suitable for use in manufacturing soaps and detergents. It is also used in rayon, paper, dye, pharmaceutical and petroleum industries. It can be stored at a temperature of 15 to 30 degree C.
-
Ricca Synthetic Fresh Water
Ricca ChemicalThe Ricca Chemical synthetic fresh water with a composition of 99.91% water, 0.04% sodium bicarbonate, 0.02% magnesium sulfate, 0.02% calcium sulfate dihydrate and 0.00% potassium chloride. It is suitable for research & laboratory use. It can be stored at a temperature of 15 to 30 degree C. Very…
-
The LabChem 0.2N sodium hydroxide in liquid form, is perfect for all laboratory use. Application: For Laboratory and Manufacturing Use Only
-
The LabChem starch indicator solution in liquid form, is soluble in water. It is non-flammable and has odorless odor. Application: For Laboratory and Manufacturing Use Only
-
Ricca 2% w/v Starch Indicator
Ricca ChemicalStarch solutions are used as indicators in the detection of the endpoint of titrations involving Iodine solutions. Starch reacts with Iodine in the presence of Iodide ion to form an intensely colored blue complex, which is visible at very low concentrations of Iodine, making it a very good…
-
Sodium Hydroxide 0.200N
ExaxolThe Exaxol 0.2N sodium hydroxide features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only Tested in an ISO 17025 accredited laboratory Standardized at 25 deg C…
-
Soap Titrant, Volumetric
Reagents®Color: Colorless liquid Composition: Acetone 87.62%, Water 12.33%, Hydrochloric Acid 0.05% DOT: UN1090, ACETONE SOLUTION, 3, P.G. II Density: 0.81 Physical State: Liquid Shelf Life: 12 Months Solubility Information: Miscible Storage: Ambient
-
The LabChem 0.1 M sodium hydroxide dissolves in water and is mainly used in laboratory and manufacturing factories. Application: For Laboratory and Manufacturing Use Only
-
The LabChem 0.1N sodium thiosulfate in liquid form, is miscible with water. Application: For Laboratory and Manufacturing Use Only
-
Sodium Hydroxide 0.500N
ExaxolThe Exaxol 0.5N sodium hydroxide features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only Tested in an ISO 17025 accredited laboratory Standardized at 25 deg C…
-
Sodium Cyanide, 10% (w/v), Volumetric
Reagents®Boiling Point: Approximately 100°C Density: 1.05 Melting Point: Approximately 0°C Color: Colorless liquid Physical State: Liquid Solubility Information: Miscible Storage: Ambient DOT: UN3414, SODIUM CYANIDE SOLUTION, 6.1, P.G. II