Inorganic, SPEX CertiPrep
-
Assurance® Grade Scandium Single-Element Standard
SPEX CertiPrepAA & ICP Assurance® Grade CRMs are designed for AA and ICP and are available in single and multi-element formulations. 70 elements are available as single-element standards and are available at 1, 000 µg/mL and/or 10, 000 µg/mL. Application: For AA and ICP
-
Claritas PPT Grade Cadmium Standard for ICP/MS
SPEX CertiPrepMatrix: 2% HNO3 Storage Condition: Ambient Shipping Info: Hazardous
-
spex® Phosphate-Phosphorus Single-Element Ion Anion Standard
SPEX CertiPrepSingle and Multi-Element Standards for Ion Chromatography, Ion chromatography (IC) is an analytical process for the separation of ions based on charge affinity. IC can be used for a variety of different kinds of charged analytes from single elements to large proteins. In order to ensure accurate…
-
-
-
-
Assurance® Grade Arsenic Single-Element Standard
SPEX CertiPrepAA & ICP Assurance® Grade CRMs are designed for AA and ICP and are available in single and multi-element formulations. 70 Elements are available as single-element standards and are available at 1, 000 µg/mL and/or 10, 000 µg/mL. Application: For AA and ICP
-
Assurance® Grade Rhenium Single-Element Standard
SPEX CertiPrepAA & ICP Assurance® Grade CRMs are designed for AA and ICP and are available in single and multi-element formulations. 70 elements are available as single-element standards and are available at 1, 000 µg/mL and/or 10, 000 µg/mL. Application: For AA and ICP
-
spex® Claritas PPT® Grade Cobalt
SPEX CertiPrepClaritas PPT® grade CRMs are designed for ICP and ICP-MS analysis. They are available in single and multi-element solutions. The standards are set at 1 µg/mL, 100 µg/mL or 1,000 µg/mL and packaged in 30 mL and 125 mL bottles to minimize contamination. They are made using ultra high purity acids,…
-
Assurance® Grade Chromium Single-Element Standard
SPEX CertiPrepAA & ICP Assurance® Grade CRMs are designed for AA and ICP and are available in single and multi-element formulations. 70 Elements are available as single-element standards and are available at 1, 000 µg/mL and/or 10, 000 µg/mL. Application: For AA and ICP
-
Assurance® Grade Iridium Single-Element Standard
SPEX CertiPrepAA & ICP Assurance® Grade CRMs are designed for AA and ICP and are available in single and multi-element formulations. 70 Elements are available as single-element standards and are available at 1, 000 µg/mL and/or 10, 000 µg/mL. Application: For AA and ICP
-
Assurance® Grade Iron Single-Element Standard
SPEX CertiPrepAA & ICP Assurance® Grade CRMs are designed for AA and ICP and are available in single and multi-element formulations. 70 Elements are available as single-element standards and are available at 1, 000 µg/mL and/or 10, 000 µg/mL. Application: For AA and ICP
-
spex Iodide (I)- Single-Element Ion Anion Standard
SPEX CertiPrepIon chromatography (IC) is an analytical process for the separation of ions based on charge affinity. IC can be used for a variety of different kinds of charged analytes from single elements to large proteins. In order to ensure accurate analysis, quality standards which are traceable and stable…
-
spex® Chloride (Cl)- Single-Element Ion Anion Standard
SPEX CertiPrepSingle and Multi-Element Standards for Ion Chromatography, Ion chromatography (IC) is an analytical process for the separation of ions based on charge affinity. IC can be used for a variety of different kinds of charged analytes from single elements to large proteins. In order to ensure accurate…
-
Assurance® Grade Standards Kit
SPEX CertiPrepAssurance® Grade, set of 38 single-element standards. Application: For ICP
-
Single and Multi-Element Standards for Ion Chromatography, Ion chromatography (IC) is an analytical process for the separation of ions based on charge affinity. IC can be used for a variety of different kinds of charged analytes from single elements to large proteins. In order to ensure accurate…
-
Assurance® Grade Thulium Single Element Inorganic Standards
SPEX CertiPrepThe Assurance® 1000 ppm thulium/2% HNO3 standard is mainly used in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage. This single element inorganic standard is suitable for use in atomic…
-
Calibration and matrix blanks may be used to dilute your multi-element standards or can be run directly as a blank to establish your base line. Do not use any acid or water as a diluent if you are not certain of its purity. Application: For AA and ICP
-
-
spex® Sulfate-Sulfur Single-Element Ion Anion Standard
SPEX CertiPrepSingle and Multi-Element Standards for Ion Chromatography, Ion chromatography (IC) is an analytical process for the separation of ions based on charge affinity. IC can be used for a variety of different kinds of charged analytes from single elements to large proteins. In order to ensure accurate…
-
Assurance® Grade Alternate Metals
SPEX CertiPrepAssurance® Mixed Multi-Element Standards for AA & ICP Standards may be diluted in the same matrix as specified; however, caution must be exercised in the choice of the source for your diluents. Diluting the matrix may cause some standards to precipitate. Also, an impure or unknown diluent turns…
-
Assurance® Grade Aluminum Single-Element Standard
SPEX CertiPrepAA & ICP Assurance® Grade CRMs are designed for AA and ICP and are available in single and multi-element formulations. 70 Elements are available as single-element standards and are available at 1, 000 µg/mL and/or 10, 000 µg/mL. Application: For AA and ICP
-
Assurance® Grade Mercury Single-Element Standard
SPEX CertiPrepAA & ICP Assurance® Grade CRMs are designed for AA and ICP and are available in single and multi-element formulations. 70 Elements are available as single-element standards and are available at 1, 000 µg/mL and/or 10, 000 µg/mL. Application: For AA and ICP
-
Assurance Grade Lab Performance Check Std, w/o Hg
SPEX CertiPrepMatrix: 5% HNO3 / tr Tart. Acid / tr H
-
spex® Multi-Element Organometallic Oil Standard
SPEX CertiPrepOrganometallic Single-Element Oil Standards The determination of wear metals in engine oils and other lubricants can be applied to machines such as automobiles, aircraft, heavy equipment, trucks, locomotives, military vehicles, etc. The examples are endless. By tracking metals suspended in the used…
-
spex Assurance® Grade Quality Control Standard 23
SPEX CertiPrepStandards may be diluted in the same matrix as specified; however, caution must be exercised in the choice of the source for your diluents. Diluting the matrix may cause some standards to precipitate. Also, an impure or unknown diluent turns your standard into an unknown. We recommend using only…
-
Assurance® Grade Calcium Single-Element Standard
SPEX CertiPrepAA & ICP Assurance® Grade CRMs are designed for AA and ICP and are available in single and multi-element formulations. 70 Elements are available as single-element standards and are available at 1, 000 µg/mL and/or 10, 000 µg/mL. Application: For AA and ICP
-
SPEX CertiPrep Claritas PPT® standards are a class of Inorganic Certified Reference Standards designed specifically for today's new generation of trace ICP and ICP-MS instrumentation. Based on extensive development, our chemists have formulated this line of high-purity standards for user…
-
-
spex Base Oil 20 Blank
SPEX CertiPrepBase Oil 20 and 75 are the same certified base oils that are used in our singles and multi-element blends.
-
-
Assurance® Grade Zinc Single Element Inorganic Standards
SPEX CertiPrepThe Assurance® 1000 ppm zinc ICP standard is mainly used in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy 500 mL bottle that endures heavy and rigorous usage. This single element inorganic standard is suitable for use in atomic…