PTFE, Supplies
-
PTFE syringe tubing gauge
MilliporeSigmaWith KEL-F Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE…
-
Beakers, PTFE, Heatable
ChemglassPTFE Beakers feature the unique combination of a pure PTFE body with a specially formulated stabilized PTFE Carbon base as a single molding to give Totally inert, pure PTFE inner surface Heatable to 270°C without distortion Improved heat transfer
-
Beakers, PTFE, Low Form
ChemglassChemically inert PTFE beakers can withstand temperatures up to 260°C.
-
PTFE syringe tubing gauge
MilliporeSigmaWith KEL-F Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE…
-
PTFE syringe tubing gauge
MilliporeSigmaWith KEL-F Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE…
-
Evaporating Dishes
DynalonTall form with pouring spout Pure polytetrafluoroethylene, heavy wall, smooth internal finish Inert and usable to 280°C
-
Chemware® PTFE Griffin Beakers
Saint GobainChemware® PTFE beakers are non-contaminating and completely inert to highly corrosive reagents. They are non-wettable, unbreakable, lightweight, and heat resistant. Easy to clean, these beakers have a broad spout for easy pouring. They can be heated on a hot plate up to 550°F (288°C),…
-
Isostatically molded beaker covers (watch glass) from virgin polytetrafluoroethylene and machine finished to give a smooth surface for ease of cleaning and to eliminate contamination. Supplied with pouring spout. Virtually immune to chemical attack, only attacked by some fluorine containing…
-
PTFE syringe tubing gauge
MilliporeSigmaWith KEL-F Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE…
-
Product Dimensions (l x w x h) : 0.883x0.805x1.065in Isostatically molded beakers from virgin Polytetrafluoroethylene and machine finished to give a smooth surface for ease of cleaning and eliminate contamination. 20 mm diameter beaker supplied with pouring spout. Virtually immune to…
-
PTFE syringe tubing gauge
MilliporeSigmaWith KEL-F Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE…
-
Teflon Straight Bore Stopcocks
DWK Life Sciences (Kimble)Complete with nut, O-ring, washer For replacement in glassware originally supplied with Teflon straight bore plugs
-
-
PTFE syringe tubing gauge
MilliporeSigmaWith KEL-F Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE…
-
Tube Assembly 12Ga 3Kin
HamiltonThe ML500 tubing assemblies are manufactured using thick walled FEP tubing. The thick walled tubing is desirable because it resists kinking during the rigors of the workday. The 12 gauge tubing has a larger inner diameter and should be used with syringe sizes larger than 2.5 mL or with viscous…
-
-
Key-Head Color-Coded Medium Length PTFE Stoppers
DWK Life Sciences (Kimble)Stoppers are used with laboratory glassware such as flasks and separatory funnels. PTFE has excellent chemical resistance and resists freezing in ground glass joints Remove the colored polyethylene handle from the PTFE stopper before cleaning or exposing to temperatures above 80 °C …
-
Stopcock, 2 mm
DWK Life Sciences (Kimble)As supplied with 1983J70 and J76 Kimble Economy Burets Plug bore two mm Also for replacement on Kimble 17800 and 17810 series Chromatography Columns and Kimble 29050-H and 29060-H series Separatory Funnels.
-
-
Teflon Double Oblique Bore Stopcock
DWK Life Sciences (Kimble)With nut, washer and O-ring Two mm bore
-
PTFE syringe tubing gauge
MilliporeSigmaWith KEL-F Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE…
-
PTFE syringe tubing gauge
MilliporeSigmaWith KEL-F Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE…
-
PTFE syringe tubing gauge
MilliporeSigmaWith KEL-F Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE…
-
These chemically resistant PYREX® keyhole stoppers are made from polytetrafluoroethylene (PTFE) and conform to Standard Taper stopper dimensions. The color-coded keys make sorting and selecting the correct size much faster and easier. These stoppers may be used in place of conventional glass…
-
Taper Tubing 18Ga 900mm Hamilton
HamiltonThe ML500 tubing assemblies are manufactured using thick walled FEP tubing. The thick walled tubing is desirable because it resists kinking during the rigors of the workday. Polytetrafluoroethylene (PTFE) tubing for ML500 valves with M6 threads The dispense tubing is used to connect from…
-
PTFE syringe tubing gauge
MilliporeSigmaWith KEL-F Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE…
-
PTFE syringe tubing gauge
MilliporeSigmaWith KEL-F Luer hub.A septum to be pierced with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE…
-
-
Tubing Assembly
HamiltonThe Hamilton tubing assembly is made of CTFE material which is more durable and highly chemical resistant. With inner diameter of 0.043 Inch and outer diameter of 0.067 Inch, this assembly enables to quickly connect and disconnect different components in the laboratory.
-
Tubing Assembly
HamiltonThe Hamilton tubing assembly is made of CTFE material which is more durable and highly chemical resistant. With inner diameter of 0.125 Inch and outer diameter of 0.155 Inch, this assembly enables to quickly connect and disconnect different components in the laboratory.
-
Tubing Assembly
HamiltonThe Hamilton tubing assembly is made of PTFE material which is more durable and highly chemical resistant. With inner diameter of 0.063 Inch and outer diameter of 0.123 Inch, this No Hub threaded assembly enables to quickly connect and disconnect different components in the laboratory.