Glass, Flasks
-
-
These PYREX® wide mouth Erlenmeyer flasks are especially recommended for use as titration flasks and are designed with heavy duty rims to reduce chipping. For convenience, these flasks are graduated in durable white enamel to show the approximate capacity and have an extra large marking…
-
PYREXPLUS® Filter Flask
CorningProtective PVC coating for longer product life and safety Graduated to show approximate capacity Heavy wall Autoclavable (121 °C) and resistant to thermal shock Tubulation O.D. is 10 mm on sizes up through 1,000 mL and 12.5 mm on 2,000 and 4,000 mL sizes (tubing is non-coated).
-
PYREX round bottom boiling flasks have full length outer Standard Taper joints, but with shorter necks. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are controlled to provide balance between thermal expansion and mechanical strength for greater shock resistance. The…
-
These PYREX® EZ Access™ wide mouth volumetric flasks are calibrated to Class A tolerances and are designed for microchemical work. The heavy duty, wide mouth facilitates filling and mixing. Supplied with interchangeable Standard Taper PYREX® ground glass stopper. The graduation line…
-
Thomas Combustion Flask Replacements and Accessories
labForce® (powered by Thomas Scientific)6514F35 of borosilicate glass, with Standard Taper 35/25 socket mouth; without stopper or sample carrier. 6514F40 stopper fits the 500 and 1,000 mL flasks; glass hook tip on lower end; platinum sample carrier not included. Black paper sample wrappers (6514F70) absorb heat quickly for infrared…
-
Angled Three Neck Round Bottom Flask
DWK Life Sciences (Kimble)Three-neck heavy wall round-bottom flask with Standard Taper outer joints Side necks are angled Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
-
Trypsinizing Flasks
DWK Life Sciences (Wheaton)For forming cell suspensions through trypsin digestion of connective proteins Fluted design improves homogenization Autoclavable with screw cap Constructed of borosilicate glass that conforms to USP Type I and ASTM E 438 Type I, Class A requirements Caps have white styrene butadiene…
-
PYREX Baffled Culture Flask
CorningScrew cap This wide mouth flask is designed for culturing organisms requiring a large surface area to volume ratio. Triple baffled on the bottom outside edges to achieve maximal oxygen transfer to culture medium. Supplied with GL45 orange polypropylene cap.
-
These PYREX® Erlenmeyer flasks have heavy tooled rims for maximum durability. The same baffle design as found on PYREX® Delong flasks promotes optimal and consistent solution agitation when used with flask shakers. Their uniform wall thickness provides the proper balance between mechanical…
-
Flask Distill Engler 125ml
DWK Life Sciences (Kimble)KIMAX distilling flask. The sidearm tube is sealed at an angle of 75 º from the neck and is 137 ± 3 mm from the bottom of the flask. It is designed from ASTM Specification E133 and intended for use in ASTM D86, D233, D801, and D802.
-
Flask Complete 4000 ml
CorningThese PYREX® 4L volumetric flasks provide improved lab convenience, broad selection and precise volume measurement. The strength of these flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-tubing necks tooled for No. 38 Standard Taper pennyhead glass…
-
6513C60 stopper was traditionally offered by Thomas for 300/500 mL combustion flasks; glass tip extends 50 mm below ground joint 6513C65 stopper is used for 1,000 mL combustion flasks; glass tip extends 90 mm below ground joint All feature U-shaped platinum gauze with 3 mm opening for insertion…
-
Narrow mouth PYREX VISTA Erlenmeyer flasks have uniform wall thickness, which provide the proper balance between mechanical strength and thermal shock resistance. Approximate graduations are in durable blue enamel. An extra large marking space is also provided. The Erlenmeyer flasks are designed to…
-
Airless-Ware Kjeldahl Schlenk Flasks
DWK Life Sciences (Kimble)With a unique design for the manipulation of air-sensitive and moisture-sensitive compounds Features a modified Kjeldahl shape that facilitates heating, stirring and solvent stripping without impairing ease of liquid and solid transfer The bottom of the flask is shaped to fit Kontes oil…
-
PYREX® VISTA™ Filtering Flasks
CorningMicro Filtering Flasks These PYREX® VISTA™ micro filtering flasks are recommended for microchemical use. The vacuum hose is attached to the flask's sidearm. A funnel is inserted into the neck of the flask through a ground joint or rubber stopper. The applied vacuum facilitates the…
-
These Class A PYREX® volumetric flasks have machine-blown bodies to which are sealed heavy-beaded, heavy-tubing necks, tooled for No. 9 PTFE color-coded keyhole stoppers. For replacement stoppers see No. 7630. The graduation line is sharp and permanent. Large white block letters make the…
-
Shake Flasks
DWK Life Sciences (Wheaton)For use with orbital or reciprocating shakers Baffles improve aeration and mixing for microbial and bacterial cultures Break resistant lip for use with stopper, cotton plug or film cover Pinched neck design to reduce splashing on flasks with 4 baffles Autoclavable borosilicate…
-
These flasks are for use in determining phosphoric acid in mixed fertilizer. Flasks feature a wide neck and heavy construction throughout.
-
PYREX Heavy Wall Filter Flasks
CorningWithout tubulation blown in special molds, designed to give maximum mechanical strength Graduated to show approximate capacity Permanent white-enamel graduations and marking spots Sizes from 250 mL to 4,000 mL
-
Delong style Three baffle indents Designed to provide greater agitation of solution to improve oxygen or gas transfer when used with rotary or reciprocating shakers. Long neck reduces splashing and is designed for two-position polypropylene closures.
-
Jacketed Double Sidearm Celstir® Spinner Flasks
DWK Life Sciences (Wheaton)The Double-Sidearm Celstir with water jacket allows precise temperature control of its contents when operated with a recirculating water bath. The hose connectors accept 1/4 in (6.35 mm) ID tubing. This unit is made from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and…
-
Thomas-Schoniger Replacement Combustion Flasks
labForce® (powered by Thomas Scientific)Conical, of heavy-wall borosilicate glass All sizes have Standard Taper 34/28 ground joints and bell-shape lip 65 mm wide x 30 mm deep. 500 mL flask is 195 mm high: 1,000 mL flask, 230 mm. Without stopper or platinum carrier.
-
Can be used with direct drive motor or magnetically driven paddle assembly Side baffles enhance aeration and agitation of flask contents Proprietary "stretch" impeller design ensures optimal stirring 4, 45mm vertical sidearms permit use with sidearm probes and fittings Vessels…
-
PYREX Fernbach Culture Flasks
CorningDesigned for culturing organisms requiring a large surface area to volume ratio Can also be used in serum production Takes stopper size 13 Thomas number 4912L15 features a triple baffle on the bottom outside edges to achieve maximum oxygen transfer to culture medium. NOTE: do…
-
For user convenience, PYREX Erlenmeyer flasks are graduated to show approximate capacity. The 25- 50- and 125 mL flasks are satisfactory for use as a weighing bottle. Erlenmeyer flasks come with a PYREX Standard Taper stopper.
-
Triple baffled flask has a Delong style 38 mm neck for plastic or stainless steel closures. Triple baffles are located at the center of the flask bottom to achieve maximal oxygen transfer to culture medium. Closures are sold separately.
-
The strength of these flasks has been increased appreciably through machine-blown bodies. Sealed, heavy-beaded, heavy-tubing necks are tooled for snap-cap fit. Graduation line is sharp, permanent and large; white block letters make the inscription easy to read. 1 mL and 2 mL sizes are…
-
Iodine Flasks
CorningFor the determination of the iodine number of oils, fats and waxes by the Wijs and Hanus methods Flaring, funnel-shaped lip and Standard Taper 22 stopper
-
KIMAX Sugar Flasks
DWK Life Sciences (Kimble)Kohlrausch, Class A Borosilicate glass Calibrated to contain 20°C Mouth enlarged for easier introduction of sample Meet NBS requirements
-
Flask 1000 ml Cs30
CorningThese 1L PYREX® round bottom boiling flasks have long necks with tooled mouths and take a No. 8 rubber stopper. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for…
-
Thomas Ogg Combustion Flasks
labForce® (powered by Thomas Scientific)6514F35 Ogg Flask of borosilicate glass, with Standard Taper 35/25 socket mouth; without stopper or sample carrier. 1233S49 Platinum Ogg Sample Carrier has a perforated aluminum sheet. It features a 13 mm deep basket on lower end that takes the paper-wrapped sample. 6514F40 Stopper fits the 1,000…