Valutek’s disposable SPP bouffant cap is manufactured with 100% non-linting, non-woven spunbond polypropylene fabric, which provides breathability while maintaining snug full coverage for the operators. The bouffant cap has a filament covered unexposed elastic edge design for secure fit and…

Valutek’s nylon glove liner is manufactured with lightweight non-linting, fine-gauge knitted, 100% continuous filament virgin nylon. The glove has an ambidextrous shape in one universal size. This glove liner fits comfortably under latex, PVC, or nitrile gloves. The seamless design limits…

Multi-Task ‘Arizona Blue’ nitrile gloves are constructed from 100% clean, synthetic nitrile polymer and contains no rubber latex, fillers, or silicones. This glove comes with beaded cuff and a textured fingertip design. This glove offers the protection of nitrile with the sensitivity of…

Valutek’s disposable 3-ply polypropylene face mask is constructed from non woven pleated, 7” x 3½” rectangular, glass-free polypropylene material with a malleable flat aluminum noseband. Available in both floss-covered round elastic ear-loops and head band design. All…

Valutek’s disposable microporous hood is manufactured with 100% non-linting microporous film bonded with a non-woven fabric. This provides superior barrier protection against non-toxic particulates, liquids, spray and dust while the hood has high breathability to ensure operator comfort. All…

Valutek’s disposable coated polypropylene sleeves are constructed from lightweight, strong, durable polyethylene-coated spunpond polypropylene fabric with a non-latex elastic cuffs design. The polyethylene coating offers great liquid protection. All Valutek sleeves are tested and manufactured…

Valutek’s PE-coated polypropylene non-skid shoe cover is manufactured with a polyethylene coated outer layer and a non-linting, non-woven spunbond polypropylene inner layer with stitched seams and elastic ankle cuffs. The shoe cover has a durable skid-resistant embossed PVC sole design and…

Valutek’s disposable anti-skid SPP ESD shoe cover is manufactured with 100% non-linting, non-woven spunbond polypropylene fabric. This shoe cover has stitched seams, sprayed latex anti-skid treads on the bottom for safety, and a 19.6” long conductive ribbon stitched on a solid seam to…

Valutek’s disposable nitrile powder-free finger cots are constructed from 100% clean, synthetic nitrile polymer, contains no rubber latex, fillers or silicones. With a smooth finish and beaded edge. The finger cots are inherently static dissipative. Packaged in a controlled environment, all…

Valutek’s 12” ambidextrous disposable latex powder-free glove is constructed from 100% natural rubber latex with fully textured design and beaded long cuff. This glove provides high-level dexterity, is strong, reliable, durable, and comfortable hand protection for operators. Packaged in…

Valutek’s twill-patterned cotton wiper is constructed from 100% tightly woven long stable cotton. The fabric of this wiper is bias-cut and has a cross section of 120 x 60 threads per square inch. This wiper is clean and durable with high heat resistance. All Valutek wipers are tested and…

Valutek’s 2-Ply ultrasonic sealed polyester wiper is constructed from 100% continuous filament polyester in a 2-ply double-knit, no-run, interlock pattern with ultrasonic sealed edges. This wiper is ultraclean and highly absorbent with critically low levels of particulate and extractable…

Valutek’s disposable microporous lab coats are manufactured with 100% non-linting microporous film bonded with a non-woven fabric that provides superior barrier protection against non-toxic particulates, liquids, spray and dust. The lab coats are highly breathable and provide great operator…

Valutek’s spunbond polypropylene disposable lab coats are manufactured with strong, lightweight, breathable, 100% non-linting, non-woven, spunbond polypropylene fabric. The lab coats are knee length with 5 snap closures, elastic cuffs, and a single ply shirt collar design. These lab coats do…

Valutek’s nylon knit wiper is constructed from 100% continuous filament nylon in a double-knit, no-run, interlock pattern. This clean and absorbent wiper offers excellent softness and superior strength. Laundered and packaged in a cleanroom, all Valutek wipers are tested and manufactured in…

Valutek’s polyester floor mop head is manufactured with 100% white filament polyester in strands to absorb and encapsulate liquids for maximum sorptive capacity. The knitted fabric has extremely low particle and fiber generation which ensures excellent cleaning results. Laundered and packaged…

Valutek’s ultrasonic sealed polyester wiper is constructed from 100% continuous filament polyester in a double-knit, no-run, interlock pattern with ultrasonic sealed edge. This wiper is an ultraclean and highly absorbent wiper with extremely low levels of particulate and extractable counts.…

Valutek’s low texture microfiber wiper is constructed from a blend of 75% continuous filament polyester and 25% nylon in a double-knit, no-run interlock design, with ultrasonic sealed edge. Laundered and packaged in a cleanroom, all Valutek wipers are tested and manufactured in ISO compliant…

Valutek’s 30lb cleanroom paper is specially formulated with cellulose fiber surrounded and bonded by a polymer impregnated substrate. The special formulation minimizes particulate and ink smearing. This also provides the paper with high tear and tensile strength but with ultra low levels of…

Valutek’s disposable anti-skid SPP shoe cover is manufactured with 100% non-linting, non-woven spunbond polypropylene fabric with stitched seams and sprayed latex anti-skid treads on the bottom for safety. The shoe covers are lightweight, strong, and durable. All Valutek shoe covers are…

Valutek’s disposable cross-linked polyethylene shoe covers are manufactured with 100% cross-linked polyethylene with heat-sealed seams. These shoe covers are strong, durable, and impervious to liquids. Available in lightweight, standard weight, and heavy weight. All Valutek shoe covers are…

Valutek’s disposable SPP beard cover is manufactured with 100% non-linting, non-woven, spunbond polypropylene fabric, which provides comfortable operator protection. The beard cover has a filament covered, unexposed elastic band for secure fit and closure. All Valutek beard covers are tested…

Valutek’s disposable microporous coveralls are manufactured with 100% non-linting microporous film bonded with a non-woven fabric to provide superior barrier protection against non-toxic particulates, liquids, spray and dust. All coveralls have a flap over zipper closure, elastic wrist, and…

Valutek’s pre-wetted pressure-heat sealed polyester wiper is composed of 100% continuous-filament polyester fabric pre-wetted with a blend of isopropyl alcohol and DI water. The pre-wetted format enhances the wipers absorbent capacity, effectiveness, and reduces airborne contamination from…

Valutek’s spunlace non-woven wiper is constructed from a hydro entangled, nonwoven blend of 55% cellulose and 45% polyester. This composite substrate combines the highly absorbent properties of a natural fiber with the cleanliness and strength of a synthetic yarn, which has a low level of…

Valutek’s pre-wetted laser sealed polyester wiper is composed of 100% continuous-filament polyester fabric pre-wetted with a blend of isopropyl alcohol and DI water. The pre-wetted format enhances the wipers absorbent capacity, effectiveness, and reduces airborne contamination from…

Valutek’s laser sealed polyester wiper is constructed from 100% continuous filament polyester in a double-knit, no-run, interlock pattern with a laser sealed edge. This wiper is an ultraclean and highly absorbent wiper with critically low levels of particulate and extractable counts.…

Valutek’s pre-wetted spunlace non-woven wiper is composed of a hydro entangled, nonwoven blend of 55% cellulose and 45% polyester pre-wetted with a blend of isopropyl alcohol and DI water. The pre-wetted format enhances the wipers absorbent capacity, effectiveness, and reduces airbone…

Valutek’s college ruled spiral-bound notebooks are manufactured with high-density polypropylene covers, with plastic spirals, and durable cleanroom papers. The covers have an impregnated antistatic property with excellent chemical resistance. The pages are printed with IPA resistant low…

Valutek’s ESD polyester wiper is constructed from 100% continuous-filament polyester in a double-knit, no-run, interlock pattern with a conductive fiber designed to dissipate electrical charge. This substrate exhibits moderate absorbency and low levels of particulate and extractable counts.…

Valutek’s 12” ambidextrous nitrile powder-free cleanroom glove is constructed from 100% clean, synthetic nitrile polymer and contains no rubber latex. This glove has a textured fingertip and a beaded long cuff design which offeres the ultimate cleanliness and operator dexterity with…

Valutek’s disposable latex powder-free black finger cots are constructed from 100% natural rubber latex, rolled with a smooth finish, and have a beaded edge. The finger cots offer a consistent conductive level and are primarily used where static charge is a major concern. Packaged in a…