Accucore HILIC Defender Guard Cartridges offer easy, economical protection of the main column with minimized impact on retention or efficiency. Based on Core Enhanced Technology, Thermo Scientific Accucore columns provide fast, high-resolution separations - without the elevated backpressures…

Optimize conventional HPLC methods with Thermo Scientific™ Accucore™ XL C18 LC Columns. Rugged 4µm solid-core particles ensure very high efficiencies within standard HPLC pressure limits. The high bonded phase coverage provides optimal retention of a broad range of nonpolar…

Manufactured for better column-to-column reproducibility Polar phase, polyethylene glycol Polar-deactivated surface tightly binds polymer for excellent thermal stability Resists oxidative damage, damage from strongly acidic or basic volatiles better than silicone solid phases …

Highly deactivated and produced to exacting tolerances to ensure a high degree of reproducibility

Validate the excellent reproducibility of Thermo Scientific* Accucore HPLC Columns. Based on Core Enhanced Technology, Accucore columns provide fast, high-resolution separations - without the elevated backpressures required by sub-2µm particles. Fast separations with excellent resolution…

Wide range of choices for a wide range of instruments and applications Thermo Scientific ferrules are available in three different materials and various dimensions to match the instrument and capillary column ID. The choice of material is dependent upon the use. 15% Graphite/85% Vespel…

Exceptionally low bleed for optimal signal-to-noise ratio, sensitivity and mass spec integrity Non-polar, 100% dimethyl polysiloxane Equivalent to USP G2 Applications: Hydrocarbons PCBs Drugs of abuse Gasoline range organics (GRO) Refinery gases …

Verify optimum selectivity of Thermo Scientific* Accucore HPLC columns for polar analytes. Based on Core Enhanced Technology, Accucore columns provide fast, high-resolution separations - without the elevated backpressures required by sub-2µm particles. Fast separations with excellent…

Verify optimum selectivity of Thermo Scientific* Accucore HPLC columns over a wide range. Based on Core Enhanced Technology, Accucore columns provide fast, high-resolution separations - without the elevated backpressures required by sub-2µm particles. Fast separations with excellent…

Accucore RP-MS Defender Guard Cartridges offer easy, economical protection of the main column with minimized impact on retention or efficiency. Based on Core Enhanced Technology, Thermo Scientific Accucore columns provide fast, high-resolution separations - without the elevated backpressures…

Accucore C18 columns offer optimum retention for non-polar compounds and separation of a broad range of analytes. Based on Core Enhanced Technology, Accucore columns provide fast, high-resolution separations – without the elevated backpressures required by sub-2µm particles. Fast…

Accucore PFP Defender Guard Cartridges offer easy, economical protection of the main column with minimized impact on retention or efficiency. Based on Core Enhanced Technology, Thermo Scientific Accucore columns provide fast, high-resolution separations - without the elevated backpressures required…

Accucore C18 Defender Guard Cartridges offer easy, economical protection of the main column with minimized impact on retention or efficiency. Based on Core Enhanced Technology, Thermo Scientific Accucore columns provide fast, high-resolution separations - without the elevated backpressures required…

Accucore PFP columns offer alternative selectivity to C18, particularly for halogenated analytes. Based on Core Enhanced Technology, Accucore columns provide fast, high-resolution separations - without the elevated backpressures required by sub-2µm particles. Fast separations with…

One-time installation procedure Can be configured to the individual user requirements Needle valves ensure gas line is not contaminated during cartridge change NOTE: Filters are not included.

Offers 90+% resolution of the first six gases in EPA Method 8260 and EPA Method 524.2 for volatile organics analysis Low to mid-polarity phase, 6% cyanopropylphenyl/94% dimethyl polysiloxane Ideal for EPA methods 624 and 608 Allows resolution of 2-nitropropane from 1,1-dichloropropanone…

Direct-connection, fingertight design for convenience and maximum efficiency Patented design requires no holder, allowing quick and easy replacement Features of Betasil Silica Solid Phase 100 Angstrom silica High surface area with high bonded phase coverage Thermo Scientific Betasil…

Siltek coating provides a surface with exceptional inertness suitable for the analysis of highly active compounds Precision machined tp provide exceptional sealing properties Reduces activity (especially useful for analysis of pesticides, PCB's, phenols, etc.) High grade stainless steel…

Use this well-tested, dependable L1. Thermo Scientific™ Hypersil™ ODS-2 C18 HPLC Columns are an alternative to older column brands commonly referenced in validated methods. Hypersil stationary phases are recognized as an industry standard in HPLC. Proven as an effective analytical…

The most widely used MS phase in gas chromatography Low polarity phase, 5% diphenyl/95% dimethyl polysiloxane Low bleed for excellent signal-to-noise ratio, sensitivity and mass spectral integrity Exceptional inertness ideal for analysis of active compounds Equivalent to USP G27…

Particularly suited to GCMS applications that require more polarity than a 5% Phenyl phase Mid-polarity phase of 50% diphenyl/50% dimethyl polysiloxane Ideal for confirmational analysis Excellent inertness for active compounds such as pesticides Very low bleed ideal for analysis by…

Acidic functionality in the polymer structure allows analysis of acidic compounds without derivatization Polar phase, acid-deactivated polyethylene glycol Resists oxidative damage and adsorption of acids Excellent peak shapes for high MW acids Equivalent to USP G25, G35 phases …

Exceptionally inert mid-polarity columns with selectivity and elution order optimized for difficult separations Polar phase, Trifluoropropylmethyl polysiloxane solid phase resolves compounds that phenyl and cyano phases cannot Outstanding thermal stability and low bleed Suitable for…

Accucore aQ columns are compatible with with 100% aqueous mobile phases and offer special selectivity for polar analytes. Based on Core Enhanced Technology, Accucore columns provide fast, high-resolution separations - without the elevated backpressures required by sub-2µm particles. Fast…

Thermo Scientific™ TraceGOLD TG-5SilMS GC Columns incorporate phenyl groups in the polymer backbone for improved thermal stability, reduced bleed and reduced susceptibility to oxidation. Application: Gc/ms Applications Using Ion-Trap Systems, Polycyclic Aromatics, Hydrocarbons Including…

Syringes for use with autosamplers, injectors, and chromatography systems. Removable-needle, fixed-needle, and plunger-in-needle formats are available in multiple needle lengths, gauges, and point styles. Ideal for gas chromatography and HPLC applications.

Accucore HIliC columns offer enhanced Retention of polar and hydrophilic analytes. Based on Core Enhanced Technology, Accucore columns provide fast, high-resolution separations - without the elevated backpressures required by sub-2µm particles. Fast separations with excellent resolution…

The Thermo Scientific liner sealing ring is suitable for use with TRACE 1300 series gas chromatograph models and Agilent SSL injector models. Match the best sealing ring with the injection port liner used in your Thermo Scientific™ or Agilent GC system

Analysis of ppm levels of amines without column priming Low polarity phase, 5% diphenyl/95% dimethyl polysiloxane Tubing surface is chemically altered to reduce tailing of active basic compounds Also allows analysis of neutral or weakly acidic compounds (e.g., phenols) and compounds…

Easy-to-use format eliminates contamination Pure gas output 99.9999% or 6.0 grade No carrier gas line contamination during filter change Easy and fast replacement without the need for tools No risk of overtightening fittings Reuseable end fittings reduce cost of clean gas:…

Use Thermo Scientific™ Acclaim™ Mixed-Mode WAX-1 Columns when powerful selectivity control for the separation of anionic molecules is necessary. The silica-based stationary phase features a hydrophobic alkyl chain with an ionizable terminus that provides both hydrophobic reversed-phase…

Thermo Scientific* Uniguard Direct-Connection Guard Cartridge Holders are reusable, stainless-steel guard cartridge holders that attach directly to the analytical column inlet—eliminating requirement for extra fittings. With PEEK 0.0625 in. male outlet that fits many columns 0.0625…