RIPA Lysis Buffer is ready-to-use as a working 1X solution and requires no further dilution. RIPA Lysis Buffer is intended for the extraction of cellular proteins for the efficient lysis of cells and solubilization of protein, while minimizing protein degradation and maintaining protein…

Express Transfer Buffer is a alternative to tris-glycine as a transfer buffer in the western blot. It may run at an elevated temperature but gives markedly lower background.

Chill to 2 to 8 °C prior to use. Lysis Buffer is provided as a ready-to-use 1X solution containing 50 mM Tris Cl, 150 mM Sodium Chloride, 1 mM EDTA, 1% TRITON-X-100, pH 7.4. No preparation is required prior to use.

Fluorescence technology is widely used to detect proteins in both the visible and near-infrared ranges. This product allows for superior signal detection and lower background noise when fluorochrome conjugated antibodies are used to visualize proteins in western blotting and other applications.…

This product is a ''ready-to-use'' 1X diluent for Horseradish Peroxidase (HRP) conjugated primary or secondary. This buffer contains buffered saline along with proprietary reagents to stabilize and preserve Horseradish Peroxidase (HRP) conjugated primary or secondary antibodies in solution. A…

1.0 M Tris HCl pH 7.8 is a concentrated stock solution and should be diluted appropriately with distilled, deionized water or equivalent to its final working concentration. This buffer consists of 1.0 M Tris HCl at pH 7.8. Meticulously prepared using ultra pure reagents dissolved in highly polished…

ELISA Microwell Coating Stabilizer is a ''ready-to-use'' 1X solution for stabilizing ELISA plates for storage prior to preforming ELISA. After the addition of blocking agent, wash the contents of ELISA microwells and add a sufficient volume of ELISA Microwell Coating Stabilizer to each well of the…

Saline solutions are available in various formulations for different purposes. Salines are also used in cell biology, molecular biology, and biochemistry experiments where ever normal salines are needed.

Molecular Biology Grade Ultrapure water is suitable for molecular immunology, molecular biology and nucleic acid methodologies, when applicable.

Freund’s adjuvant may be used to form water-in-oil emulsions with antigens for the injection of immunogens for antibody production. Proper emulsion formation is essential and should be tested by observing a drop of the emulsion on the surface of water which should 'bead and not disperse. Antigens…

UniGlow™ is ready-to-use and no mixing is required. UniGlow™- One Component Chemiluminescent Substrate is for use in microwell or membrane applications. Protect from light - UniGlow™ Substrate is a highly sensitive detection reagent. Equilibrate to room temperature before use and aliquot into a…

Use BLOTTO whenever procedures call for immunoanalytical grade non-fat dry milk.   Alternative blocking agents such as BLOTTO A (solution of TBS, 5% non-fat dry milk and 0.05% Tween-20) and BLOTTO B (solution of TBS, 1% non-fat dry milk, 1% BSA and 0.05% Tween-20) are also available.  BLOTTO A is a…

Sodium Ethanoate is a concentrated stock solution and should be diluted appropriately with distilled, deionized water or equivalent to its final working concentration. This buffer contains 3.0 M Sodium Acetate at pH 5.2 meticulously prepared using ultra pure reagents dissolved in highly polished…

This product is ready-to-use as a working 1X solution and requires no further dilution. This buffer consists of 60 mM Calcium Chloride, 15% v/v Glycerol, 10mM Tris HCl at a pH of 7.5.  Meticulously prepared using ultra pure reagents dissolved in highly polished pharmaceutical grade deionized water.

This product is a 1X working solution. 1X Tris Buffered Saline consists of 0.1M Tris HCl and 0.15 M Sodium Chloride, pH 7.8, meticulously prepared using ultra pure reagents dissolved in pharmaceutical grade water (WFI).

Tris-Acetate-EDTA (TAE) is a concentrated stock solution and should be diluted appropriately with distilled, deionized water or equivalent to its final working concentration. Tris-Acetate-EDTA (TAE) consists of 2.0 M Tris-Acetate, 0.05 M EDTA at a pH of 8.3.  Meticulously prepared using ultra pure…

Tween-20 Ultra Pure, Liquid

This product is a ''ready-to-use'' 1X solution for stabilizing ELISA plates for storage prior to ELISA. After coating with antigen or antibody, wash the contents of the ELISA microwells and add a sufficient volume of ELISA Microwell Blocking Buffer with Stabilizer to each well of the microplate. …

This product is a 10X concentrated stock solution.  Prepare a 1X working solution by diluting 1 part 10X concentrate with 9 parts distilled-deionized water or equivalent. 10X BBS Fish Gel Concentrate consists of 1.0M boric acid, 1.5M sodium chloride and Fish Gelatin at pH 8.0.  A proprietary…

This product is a 1.0M concentrated stock solution and should be diluted appropriately with distilled, deionized water or equivalent to its final working concentration. This buffer contains 1.0 M Magnesium Chloride and was meticulously prepared using ultra pure reagents dissolved in highly…

Revitablot™ Western Blot Stripping Buffer is ready-to-use as a working 1X solution and requires no further dilution.

Prepare FemtoMax™ Super Sensitive Chemiluminescent HRP Substrate for use in microwell or membrane applications by mixing 1 mL of Luminol Reagent (Reagent A) with 1 mL of Reaction Buffer (Reagent B).  Mix well.  Protect from light.  Larger or smaller volumes of the substrate can be prepared by…

This product is a 5.0M concentrated stock solution and should be diluted appropriately with distilled, deionized water or equivalent to its final working concentration. This buffer contains untitrated 5.0 M Potassium Acetate.  Meticulously prepared using ultra pure reagents dissolved in highly…

This component is ready-to-use and requires no additional preparation.

This product is a concentrated stock solution and should be diluted appropriately with distilled, deionized water or equivalent to its final working concentration. 10X Tris-Borate EDTA (TBE) consists of 0.9 M Tris-Borate, 0.01 M EDTA at a pH of 8.3.  Meticulously prepared using ultra pure reagents…

Blocking Buffer Sampler Kit contains: NORMAL GOAT SERUM (NGS), BOVINE SERUM ALBUMIN - Fraction V (Immunoglobulin and Protease Free), Blocking Buffer (2X) for Fluorescent Western Blotting, ELISA Microwell Blocking Buffer with Stabilizer (Azide and Mercury Free) - Designed for ELISA assays, 10X…

10% SDS is a concentrated stock solution and should be diluted appropriately with distilled, deionized water or equivalent to its final working concentration. Product consists of 10% (w/v) Sodium Dodecyl Sulfate (SDS).  Meticulously prepared using ultra pure reagents dissolved in highly polished…

Fluorescence technology is widely used to detect proteins in both the visible and near-infrared ranges. This product allows for superior signal detection and lower background noise when fluorochrome conjugated antibodies are used to visualize proteins in western blotting and other applications.…

TMB Prestained Red ELISA Peroxidase Substrate produces a soluble blue end product of ELISA, read at 370nm or 655nm.

This product is a 0.5M concentrated stock solution and should be diluted appropriately with distilled, deionized water or equivalent to its final working concentration. This buffer contains 0.5 M Calcium Chloride.  Meticulously prepared using ultra pure reagents dissolved in highly polished…

This product is a 1.0M concentrated stock solution and should be diluted appropriately with distilled, deionized water or equivalent to its final working concentration. This buffer contains untitrated 1.0 M Magnesium Sulfate that was meticulously prepared using ultra pure reagents dissolved in…

Tris solution is suitable for molecular immunology, molecular biology and nucleic acid methodologies, when applicable. This product is a concentrated stock solution and should be diluted appropriately with distilled, deionized water or equivalent to its final working concentration. This buffer…