Ricca Chemical, UN3264
-
-
Ceric Sulfate is a powerful and versatile oxidizing agent that possesses certain advantages over Potassium Dichromate and Potassium Permanganate. These advantages include increased stability, ability to be used in a high concentration of Hydrochloric Acid (where Potassium Permanganate is…
-
-
VeriSpec™ Multi-Element Standard 18
Ricca Chemical100 ppm: Ag, Al, As, Ba, Be, Cd, Co, Cr, Cu, Mn, Ni, Pb, Se, Th, Tl, U, V, Zn Matrix: 5% HNO3 Min: >= 99.5 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
Ricca 10000 ppm K in 5% HNO3 Potassium ICP-MS Standard
Ricca ChemicalThe Ricca Chemicals potassium ICP-MS standard (10000 ppm potassium in 5% nitric acid) is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage.
-
VeriSpec™ Bismuth Standard for ICP, 1000 ppm in HNO3
Ricca ChemicalMatrix: 5% HNO3 Min: >= 995 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
Ricca O-Tolidine Reagent
Ricca ChemicalThe Ricca Chemical o-tolidine reagent with a composition of 93.32% water, 6.55% hydrochloric acid and 0.14% o-tolidine dihydrochloride, is suitable for use in analytical, clinical and forensic chemistry applications. It can be stored at a temperature of 15 to 30 degree C.
-
Sodium molybdate, Na2MoO4, is useful as a source of molybdenum. This white, crystalline salt is often found as the dihydrate, Na2MoO4·2H2O. The molybdate(VI) anion is tetrahedral. Two sodium cations coordinate with every one anion.
-
Ricca 1 Normal Nitric Acid
Ricca ChemicalNitric acid is the inorganic compound with the formula HNO3. It is a highly corrosive mineral acid. The compound is colorless, but older samples tend to be yellow cast due to decomposition into oxides of nitrogen. Most commercially available nitric acid has a concentration of 68% in water.
-
VeriSpec™ Instrument Calibration Standard 4
Ricca Chemical5000 ppm: Ca, K, Mg, Na Matrix: 5% HNO3 Min: >= 4975 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
VeriSpec™ Interference Check Solution A
Ricca Chemical20,000 ppm Cl, Ca 3000 ppm; 2500 ppm Fe, Na; 2000 ppm C; 1000 ppm Al, Mg, P, K, S; 20 ppm Mo, Ti Matrix: 5% HNO3 /tr HF Min: >= 1990 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
-
Ricca Zinc ICP Standard
Ricca ChemicalThe Ricca Chemical zinc ICP standard with a composition of 93.98% water, 5.06% nitric acid, 0.96% zinc, is suitable for research and laboratory use. It acts as an anti corrosive agent on metallic surfaces. It can be stored at a temperature of 15 to 30 degree C.
-
VeriSpec™ Manganese Standard for ICP, 10 g/L in 5% HNO3
Ricca ChemicalMatrix: 5% HNO3 Min: >= 9950 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
Ricca Ferric Alum Indicator
Ricca ChemicalThe Ricca Chemical ferric alum indicator with a composition of 81.58% water, 9.26% ferric ammonium sulfate dodecahydrate and 9.16% nitric acid, is suitable for use in medicine, chemical analysis and metallurgy. It can be stored at a temperature of 15 to 30 degree C.
-
Gardner Color Standard #9
Ricca ChemicalName CAS# Grade Water 7732-18-5 ACS/ASTM/USP/EP Ferric Chloride Hexahydrate 10025-77-1 ACS Hydrochloric Acid 7647-01-0 ACS Cobalt (II) Chloride Hexahydrate 7791-13-1 ACS
-
Ricca 10,000 ppm Be in 5% HNO3 Beryllium ICP Standard
Ricca ChemicalThe Ricca Chemical 50 mL beryllium ICP standard with composition of 84.20% water, 10.74% beryllium basic acetate and 5.06% nitric acid is suitable for research and laboratory use. It is used in pharmaceutical, mining and petrochemical industries. It can be stored at a temperature of 15 to 30 degree C.
-
Gardner Color Standard #16
Ricca ChemicalName CAS# Grade Water 7732-18-5 ACS/ASTM/USP/EP Ferric Chloride Hexahydrate 10025-77-1 ACS Hydrochloric Acid 7647-01-0 ACS Cobalt (II) Chloride Hexahydrate 7791-13-1 ACS
-
Ricca Color Standard
Ricca ChemicalColor can be one of the most obvious indications of contamination or deterioration. For this reason, color specifications have been set by organizations such as ACS, USP, ASTM, and EP for many pharmaceuticals, chemicals, and other products. Color is also an important measurement for water and…
-
-
Ricca 10, 000 ppm Pb in 5% HNO3 Lead ICP Standard
Ricca ChemicalThe Ricca Chemical lead ICP standard with a composition of 93.98% water, 5.06% nitric acid and 0.96% lead, is suitable for use in environmental, pharma, mining and petrochemical industries. It can be stored at a temperature of 15 to 30 degree C.
-
-
Ricca Copper Sulfate Solution
Ricca ChemicalThe Ricca Chemicals copper sulfate solution is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage. Application: For Aluminum Can Coating Test
-
Ammonium Molybdate TS
Ricca ChemicalWe offer a broad range of USP (United States Pharmacopeia) and multicompendial (USP/EP) solutions and test reagents. Our product line - the most extensive available - makes it easy for you to select and order the products you need. Our FDA-registered and inspected facilities, cGMP compliant…
-
Ricca 10000 ppm K in 5% HNO3 Potassium ICP Standard
Ricca ChemicalThe Ricca Chemicals potassium ICP standard is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage.
-
VeriSpec™ Barium Standard for ICP, 10 g/L in 5% HCl
Ricca ChemicalMatrix: 5% HCl Min: >= 9950 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
VeriSpec™ Gallium Standard for ICP, 10 g/L in 5% HNO3
Ricca ChemicalMatrix: 5% HNO3 Min: >= 9950 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility
-
VeriSpec™ Multi-Element Standard 30
Ricca Chemical10 ppm: Ag, Al, As, Ba, Be, Bi, Ca, Cd, Co, Cr, Cs, Cu, Fe, Ga, Hg, In, K, Li, Mg, Mn, Na, Ni, Pb, Rb, Se, Sr, Tl, U, V, Zn Matrix: 5% HNO3 Min: >= 9.95 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Fac
-
Ricca 5% v/v Nitric Acid
Ricca ChemicalNitric acid is the inorganic compound with the formula HNO3. It is a highly corrosive mineral acid. The compound is colorless, but older samples tend to be yellow cast due to decomposition into oxides of nitrogen. Most commercially available nitric acid has a concentration of 68% in water.
-
-
Ricca Color Standard
Ricca ChemicalColor can be one of the most obvious indications of contamination or deterioration. For this reason, color specifications have been set by organizations such as ACS, USP, ASTM, and EP for many pharmaceuticals, chemicals, and other products. Color is also an important measurement for water and…
-
Matrix: 5% HNO3 Min: >= 995 Max: = Manufactured and Tested in an ISO 17025/Guide 34 Accredited Facility