The Ricca Chemical sodium hydroxide is widely used in biochemistry industry and is useful for neutralization of acids. It is a basic solution and has the ability to raise pH of chemical solutions. This neutralization agent is perfect for use in the chemical industry, paper making, petroleum…

The Ricca Chemical sodium chloride with a composition of 99.11% water and 0.89% sodium chloride, is suitable for use in plastic, paper, rubber, glass, soap, detergent and dye industries. It also plays a major role in medical treatments. It can be stored at a temperature of 15 to 30 degree C. …

Sodium chloride, commonly known as salt, is an ionic compound with the chemical formula NaCl, representing a 1:1 ratio of sodium and chloride ions. With molar masses of 22.99 and 35.45 g/mol respectively, 100 g of NaCl contains 39.34 g Na and 60.66 g Cl.

Sodium Carbonate is used as a basimetric standard but it is not a very good primary standard since it is difficult to dry, is hygroscopic, and has a relatively low equivalent weight. For these reasons, Tris(hydroxymethyl)aminomethane has largely replaced it as a basimetric standard. Sodium…

The Ricca Chemical sodium hydroxide - EDTA solution with a composition of 71.16% water, 28.57% sodium hydroxide, 0.26% ethylenediaminetetraacetic acid (EDTA), disodium salt and dihydrate, is suitable for research and laboratory use. It can be stored at a temperature of 15 to 30 degree C.

Sodium acetate, CH3COONa, also abbreviated NaOAc, is the sodium salt of acetic acid. This colorless deliquescent salt has a wide range of uses.

Sodium carbonate refers to a family of inorganic compounds with the formula Na2CO3?, where x can range from 0 to 10. All forms are white, odorless, water-soluble salts that yield alkaline solutions in water. Historically, it was extracted from the ashes of plants grown in sodium-rich soils.

The Ricca Chemical simulated intestinal fluid TS comes in a hazy liquid appearance and is used mainly in biological and medicinal purposes.

The Ricca Chemical sodium thiosulfate with a composition of 59.02% water, 40.65% sodium thiosulfate pentahydrate and 0.33% sodium carbonate, is suitable for use in analytical chemistry analysis. It is used in water treatment process and is used to treat cyanide poisoning. It can be stored at a…

Starch solutions are used as indicators in the detection of the endpoint of titrations involving Iodine solutions. Starch reacts with Iodine in the presence of Iodide ion to form an intensely colored blue complex, which is visible at very low concentrations of Iodine, making it a very good…

The Ricca Chemical semen diluting fluid with a composition of 94.55% water, 4.90% sodium bicarbonate, 0.39% formaldehyde and 0.16% methyl alcohol, is suitable for use in sperm count determination. It can be stored at a temperature of 15 to 30 degree C. Application: Bicarbonate-Formalin Diluting…

The Ricca Chemical sodium hydroxide with a composition of 50.00% water and 50.00% sodium hydroxide, is suitable for use in manufacturing soaps and detergents. It is also used in rayon, paper, dye, pharmaceutical and petroleum industries. It can be stored at a temperature of 15 to 30 degree C.

The Ricca Chemical sodium phenate solution with a composition of 89.04% water, 8.05% phenol and 2.91% sodium hydroxide, is suitable for use as an antiseptic and as a disinfectant. It is also used in organic synthesis. It can be stored at a temperature of 15 to 30 degree C. Application: For Ammonia…

The Ricca Chemical synthetic fresh water with a composition of 100.00% water, 100.00% sodium bicarbonate, 0.00% magnesium sulfate, 0.00% calcium sulfate dihydrate and 0.00% potassium chloride. It is suitable for research & laboratory use. It can be stored at a temperature of 15 to 30 degree C. …

The Ricca Chemical sodium hydroxide solution with a composition of 92.12% water and 7.88% sodium hydroxide, is suitable for use in manufacturing soaps and detergents. It is also used in rayon, paper, dye, pharmaceutical and petroleum industries. It can be stored at a temperature of 15 to 30 degree C.

The Ricca Chemical silver nitrate with a composition of 90.78% water and 9.22% silver nitrate, is used to treat skin infections of wounds and burns. It can be stored at a temperature of 15 to 30 degree C.

Sodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).

The Ricca Chemicals 0.00100 normal (N/1000) silver nitrate is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage.

The Ricca Chemical soap solution helps in minimizing the surface tension of water thus making it ideal to wet and clean dirty surfaces. Soap solution is derived from fatty acids and is used extensively for cleansing and lubricating products.

The Ricca Chemicals 12% (w/v) sodium phosphate is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage.

The Ricca Chemical starch indicator with a composition of 99.38% water, 0.50% starch, soluble and 0.13% salicylic acid, is suitable for use in detection of iodine. It can be stored at a temperature of 15 to 30 degree C. Application: For Iodometric Titrations

The Ricca Chemical sodium carbonate with a composition of 95.24% water and 4.76% sodium carbonate, is suitable for use in detergent and soap manufacturing. It can be stored at a temperature of 15 to 30 degree C.

The Ricca Chemical synthetic sea water is composed of 95.87% water, 2.39% sodium chloride, 1.08% magnesium chloride hexahydrate, 0.15% calcium chloride dihydrate, 0.07% potassium chloride, 0.02% sodium bicarbonate, 0.01% potassium bromide, 0.00% strontium chloride hexahydrate, 0.00% boric acid,…

The Ricca Chemicals sodium phosphate is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage.

Starch solutions are used as indicators in the detection of the endpoint of titrations involving Iodine solutions. Starch reacts with Iodine in the presence of Iodide ion to form an intensely colored blue complex, which is visible at very low concentrations of Iodine, making it a very good…

The Ricca Chemicals 11.5% (w/v) sodium tartrate TS (test solution) is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage.

The Ricca Chemical starch indicator with a composition of 99.63% water, 0.30% starch, soluble and 0.07% salicylic acid, is suitable for use in detection of iodine. It can be stored at a temperature of 15 to 30 degree C.

The Ricca Chemical sodium sulfite with a composition of 90.91% water and 9.09% sodium sulfite, is suitable for use in paper, photography, food preservative and beverage industries. It is also useful in manufacturing medications. It can be stored at a temperature of 15 to 30 degree C.

The Ricca Chemical sodium chloride with a composition of 75.40% water and 24.60% sodium chloride, is suitable for use in plastic, paper, rubber, glass, soap, detergent and dye industries. It also plays a major role in medical treatments. It can be stored at a temperature of 15 to 30 degree C.

Sulfuric acid or sulphuric acid, known in antiquity as oil of vitriol, is a mineral acid composed of the elements sulfur, oxygen and hydrogen, with the molecular formula H2SO4. It is a colorless, odorless and viscous liquid that is miscible with water.

The Ricca Chemical 1 Liter Scott's bluing reagent is used for the preparation of nuclear hematoxylin stain in cytology and histology. Application: Bluing Agent For Nuclear Hematoxylin Stain