We offer the largest offering of EPA solutions and standards available. Practically every solution and standard you could need to satisfy the EPA requirements are readily available. This product is certified as a reagent for the following test methods: Reference: EPA Method:…

The Ricca Chemical saccomanno collection fluid is perfect to use for the fixation process of cytology specimens including fine needle aspirates, urine, sputum and bronchial washings and pleural and peritoneal fluids. Fixative and preservative for sputum samples

The Ricca Chemical sodium acetate with a composition of 74.81% water and 25.19% sodium acetate trihydrate, is suitable for use in food, textile, cosmetic and concrete industries. It can be stored at a temperature of 15 to 30 degree C.

Sodium chloride, commonly known as salt, is an ionic compound with the chemical formula NaCl, representing a 1:1 ratio of sodium and chloride ions. With molar masses of 22.99 and 35.45 g/mol respectively, 100 g of NaCl contains 39.34 g Na and 60.66 g Cl. Application: For use as Blood Bank Saline

The Ricca Chemical sodium hypochlorite solution with a composition of 94.00% water and 6.00% sodium hypochlorite, acts as a bleaching or disinfectant agent. It can be stored at a temperature of 15 to 30 degree C. 6% available chlorine

The Ricca Chemical synthetic fresh water with a composition of 99.99% water, 0.00% sodium bicarbonate, 0.00% magnesium sulfate, 0.00% calcium sulfate dihydrate and 0.00% potassium chloride. It is suitable for research & laboratory use. It can be stored at a temperature of 15 to 30 degree C. Soft…

The Ricca Chemical sulfosalicylic acid with a composition of 90.57% water and 9.43% 5-sulfosalicylic acid dihydrate, is suitable for use in urine protein content determination. It is used in wide range of industries. It can be stored at a temperature of 15 to 30 degree C.

Sodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).

The Ricca Chemical sulfosalicylic acid with a composition of 81.82% water and 18.18% 5-sulfosalicylic acid dihydrate, is suitable for use in urine protein content determination. It is used in wide range of industries. It can be stored at a temperature of 15 to 30 degree C.

Sulfuric acid or sulphuric acid, known in antiquity as oil of vitriol, is a mineral acid composed of the elements sulfur, oxygen and hydrogen, with the molecular formula H2SO4. It is a colorless, odorless and viscous liquid that is miscible with water.

The Ricca Chemical sodium acetate with a composition of 80.00% water and 20.00% sodium acetate trihydrate, is suitable for use in food, textile, cosmetic and concrete industries. It can be stored at a temperature of 15 to 30 degree C.

Starch solutions are used as indicators in the detection of the endpoint of titrations involving Iodine solutions. Starch reacts with Iodine in the presence of Iodide ion to form an intensely colored blue complex, which is visible at very low concentrations of Iodine, making it a very good…

The Ricca Chemical sodium hydroxide with a composition of 64.75% water and 35.25% sodium hydroxide, is suitable for use in manufacturing soaps and detergents. It is also used in rayon, paper, dye, pharmaceutical and petroleum industries. It can be stored at a temperature of 15 to 30 degree C.

Starch solutions are used as indicators in the detection of the endpoint of titrations involving Iodine solutions. Starch reacts with Iodine in the presence of Iodide ion to form an intensely colored blue complex, which is visible at very low concentrations of Iodine, making it a very good…

The Ricca Chemical sodium hypochlorite solution with a composition of 94% water and 6.00% sodium hypochlorite, acts as a bleaching or disinfectant agent. It can be stored at a temperature of 15 to 30 degree C.

Sodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).

207 ppm TDS as Fresh Water Ions, 80 - 100 mg/L Hardness as CaCO3

Sodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).

The Ricca Chemical sodium chloride with a composition of 94.38% water and 5.62% sodium chloride, is suitable for use in plastic, paper, rubber, glass, soap, detergent and dye industries. It also plays a major role in medical treatments. It can be stored at a temperature of 15 to 30 degree C.

Sulfuric acid or sulphuric acid, known in antiquity as oil of vitriol, is a mineral acid composed of the elements sulfur, oxygen and hydrogen, with the molecular formula H2SO4. It is a colorless, odorless and viscous liquid that is miscible with water. Application: For Fat, Babcock Method

Sodium carbonate refers to a family of inorganic compounds with the formula Na2CO3?, where x can range from 0 to 10. All forms are white, odorless, water-soluble salts that yield alkaline solutions in water. Historically, it was extracted from the ashes of plants grown in sodium-rich soils.

Sodium thiocyanate is the chemical compound with the formula NaSCN. This colorless deliquescent salt is one of the main sources of the thiocyanate anion. As such, it is used as a precursor for the synthesis of pharmaceuticals and other specialty chemicals.

The Ricca Chemical starch indicator with a composition of 99.63% water, 0.30% starch, soluble and 0.07% salicylic acid, is suitable for use in detection of iodine. It can be stored at a temperature of 15 to 30 degree C.

Sulfuric acid or sulphuric acid, known in antiquity as oil of vitriol, is a mineral acid composed of the elements sulfur, oxygen and hydrogen, with the molecular formula H2SO4. It is a colorless, odorless and viscous liquid that is miscible with water.

Sodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).

The Ricca Chemical sodium phenate solution with a composition of 89.04% water, 8.05% phenol and 2.91% sodium hydroxide, is suitable for use as an antiseptic and as a disinfectant. It is also used in organic synthesis. It can be stored at a temperature of 15 to 30 degree C. Application: For Ammonia…

The Ricca Chemical sodium hydroxide dilution solution with a composition of 99.84% water and 0.16% sodium hydroxide, is suitable for use in manufacturing soaps and detergents. It is also used in rayon, paper, dye, pharmaceutical and petroleum industries. It can be stored at a temperature of 15 to…

Sodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).

The Ricca Chemical sodium carbonate with a composition of 99.90% water and 0.10% sodium carbonate, is suitable for use in detergent and soap manufacturing. It can be stored at a temperature of 15 to 30 degree C.

The Ricca Chemical synthetic sea water is composed of 95.87% water, 2.39% sodium chloride, 1.08% magnesium chloride hexahydrate, 0.15% calcium chloride dihydrate, 0.07% potassium chloride, 0.02% sodium bicarbonate, 0.01% potassium bromide, 0.00% strontium chloride hexahydrate, 0.00% boric acid,…

Sodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).

Sodium chloride, commonly known as salt, is an ionic compound with the chemical formula NaCl, representing a 1:1 ratio of sodium and chloride ions. With molar masses of 22.99 and 35.45 g/mol respectively, 100 g of NaCl contains 39.34 g Na and 60.66 g Cl.