Qorpak Test Tube Caps
-
Phenolic Pulp/Vinyl Lined Caps are perfect for general use. The liner is made of a vinyl coating applied to high density polyethylene coated paper and then it is laminated to pulpboard. This general purpose liner is commonly used for food, beverage, medical and chemical applications packed at less…
-
PolyCone Lined Phenolic Caps form an exceptionally tight seal and offer a good chemical barrier. This liner molds itself around the sealing areas of the finish as the cap is screwed on, virtually eliminating leakage, evaporation, contamination, binding and backing off. Great for everything from…
-
PP SturdeeSeal® PE Foam Lined Caps are known for good impact strength, cost effectiveness, and pliability. These polypropylene closures with foamed polyethylene liners have excellent sealing characteristics and offer good chemical resistance including acids, alcohols, alkalis, aqueous products,…
-
Green Thermoset F217 & PTFE Lined Caps are known for providing the widest range of chemical compatibility and for being the most temperature tolerant of plastic closures. The color green easily identifies the PTFE liner system. Foam backed PTFE liners resist attack from virtually all chemicals…
-
F422 HDPE Foam Lined Polypropylene Caps are acid resistant. This F422 liner is comprised of a .38" LDPE core sandwiched between identical layers of .002" - .003" virgin HDPE.
-
Dropper Assemblies
QorpakDropper Assemblies feature a glass tube with black polypropylene closure and rubber squeeze bulb. The opening of tube tip has a 3.0mm outside diameter. These dropper caps are available in multiple sizes with dropper tubes in multiple lengths.
-
Metal caps offer the widest range of temperature tolerances and are very resistant to fracture from impact. Metal caps are great for industrial and food applications. A metal closure is manufactured from either steel (coated with anti-corrosive coating of either chromeplate or tinplate) or…
-
Metal caps offer the widest range of temperature tolerances and are very resistant to fracture from impact. Metal caps are great for industrial and food applications. A metal closure is manufactured from either steel (coated with anti-corrosive coating of either chromeplate or tinplate) or…
-
White Polypropylene (PP) Trigger Sprayer Pumps dispense liquid from a nozzle that allows the user to adjust spray pattern from jet stream to spray to fine mist.
-
Black Phenolic F217 & PTFE Lined Caps are known for providing the widest range of chemical compatibility. Foam backed PTFE liners resist attack from virtually all chemicals at room temperature and provides resilience for a tight seal with a low moisture transmission rate. F217 has a low density…
-
Black Phenolic Solid PE Lined Caps offer good chemical resistance and low moisture vapor transmission rate. They are great for nail polish remover and higher concentration acids & alkalis. Good for non-oil products filled at room temperature. Because this lining system is paperless, your…
-
Qorpak® Unlined Cap
QorpakUnlined polypropylene caps manufactured by qorpak offer good impact strength, cost effectiveness and pliability. these caps are autoclavable and are suitable for many dry products.
-
Flip Top Caps are ideal on the workbench for dispensing small amounts of liquid. They are made of durable polypropylene and are unlined. Orifice is 3.0mm.
-
Trigger Sprayer Pumps
QorpakTrigger Sprayer Pumps are available foam PE lined or linerless Industrial Sprayers.
-
Dropper Assemblies
QorpakDropper Assemblies feature a glass tube with black polypropylene closure and rubber squeeze bulb. The opening of tube tip has a 3.0mm outside diameter. These dropper caps are available in multiple sizes with dropper tubes in multiple lengths.
-
Black Unlined Polypropylene Caps are known for good impact strength, cost effectiveness, and pliability. Unlined polypropylene closures are also available in white. These caps are autoclavable and are suitable for many dry products.
-
Thermoset Urea closures
QorpakThermoset Urea closures are known for providing the widest range of chemical compatibility and for being the most temperature tolerant of plastic closures. Thermosetting plastics (thermosets) such as urea resins are polymers that irreversibly cure; thus urea caps and closures cannot be remelted…
-
ValuLine White Ribbed Polypropylne F217 & PTFE Lined Cap
-
Dropper Assemblies feature a glass tube with black polypropylene closure and rubber squeeze bulb. Tip opening has a 3.0mm outside diameter.
-
White Unlined Polypropylene Caps are known for good impact strength, cost effectiveness, and pliability. Unlined polypropylene closures are also available in black. These caps are autoclavable and are suitable for many dry products.
-
Polypropylene (PP) caps
QorpakPolypropylene (PP) caps with F217 & PTFE liners are an economical alternative to Thermoset & Phenolic PTFE lined caps. These PP caps have a PTFE facing, backed by F217 liners. F217 liners consist of 3 plys: a low density foam core tightly sandwiched between two layers of polyethylene…
-
Black Phenolic F217 & PTFE Lined Caps are known for providing the widest range of chemical compatibility and for being the most temperature tolerant of plastic closures. Foam backed PTFE liners resist attack from virtually all chemicals at room temperature and provides resilience for a tight…
-
Phenolic Pulp/Vinyl Lined Caps are perfect for general use. The liner is made of a vinyl coating applied to high density polyethylene coated paper and then it is laminated to pulpboard. This general purpose liner is commonly used for food, beverage, medical and chemical applications packed at less…
-
PTFE Septa, 22mm & 24mm
QorpakChoose the PTFE/Silicone Septa to resist coring and provide great resealability. These septa are available in a variety of colors for easy sample identification.
-
Black Phenolic Rubber Lined Caps are autoclavable. The Liner is compliant with FDA 21 CFR 177.2600 Rubber Articles Intended for Repeated Use. The liner exhibit good resiliency and resistance to moisture vapor. The closures provide consistent adherence to close dimensional tolerance.
-
Metal caps
QorpakMetal caps are very resistant to fracture from impact, and are great for industrial and food applications. Plastisol Lined Metal Caps and lids offer excellent resistance to mild acids as in food products, and are generally used on glass bottles and jars.
-
Qorpak® Lined Cap
QorpakThe Qorpak white lined cap is made from solid polypropylene material and the ribbed design ensures a leak-proof seal.
-
EZ Tear lid
QorpakOur EZ Tear lid features a pull tab to secure the contents during shipping and transport.
-
LDPE (low density polyethylene) plastic Yorker Caps come with replaceable LDPE Red Sealing Tips to keep bottle contents inside when not in use. These Yorker Caps w/ Red Tips are ideal for dispensing small amounts of liquid or gels such as condiments, syrups, glues, and more from squeezable and…
-
Pulp/Vinyl Lined Polypropylene Caps are commonly used for food, beverage, medical and chemical applications packed at less than 120° F., including mild acids, alkalis, solvents, alcohols, oils and aqueous products. Polypropylene caps are known for good impact strength, durability, cost…
-
PTFE Sealing Discs
QorpakPTFE Discs are made of 0.010" solid virgin PTFE. They can be manually inserted into closures of appropriate size. Often used for environmental sampling. Convert ordinary caps into non-contaminating closures at a fraction of the cost. Just press the disc into your existing closure. Easy-to-clean.…
-
Polypropylene Hole Caps are known for good impact strength, cost effectiveness, and pliability. Septa sold separately.