PerkinElmer, Supplies
-
Sample Tray for PerkinElmer AS-93 plus/S10 Autosampler (rinsing-port rack) with rinsing port location (location 0) and 20 locations for 50 mL solution containers.
-
A complete High-Sensitivity plastic body nebulizer with Pt/Ir capillary and Viton o-rings. Recommended for use with aqueous solutions. This nebulizer is compatible with the PinAAcle 500 and 900F/H/T AA instruments. Note: This nebulizer ships as standard equipment on instruments configured with a…
-
CORR RESIST SAMPLE PROBE W/O TUBING
PerkinElmerSuitable for inorganic acids and most organic solvents,except NMP. Requires, but does not include, the capillary tubing assemblies.
-
Replacement Seal
PerkinElmerThe PerkinElmer replacement seal is designed to use with bio-compatible titanium inline solvent filter.
-
Ammonia Dual Stage Tank Regulator
PerkinElmerAmmonia regulator, two stage 316 SS Bartstock regulator, 316 SS diaphragm, Delivery pressure 0-30 PSIG, 1/8 Ultra-Torr fitting. With CGA 660 fitting.
-
Single Position Water Thermostatted Cell Holder
PerkinElmerCell holder for a 10 mm path length cell, water thermostatted. Thiscell holder is included with the instrument.
-
We offer fit-to-perform Shimadzu Pyrolytically-Coated Graphite Tubes with Built-in Platforms, equivalent to Shimadzu part 206-5887-02RI.
-
Fixed Needle Gas Tight Syringe
PerkinElmerThe PerkinElmer 2.5 mL gastight syringe features a fixed needle that offers a tight seal with the barrel and the easy-to-read markings on the syringe makes it easy to use.
-
-
The new Advanced Platform design suspends the platform in the tube using three small pins in a triangular layout. This has the advantage of minimizing wall contact and reducing thermal conduction from the tube walls resulting in even and rapid heating almost exclusively from thermal radiation, an…
-
Removable Needle Gas Tight Syringe
PerkinElmerThe PerkinElmer gas tight syringe with a 1 mL volume capacity features a removable needle and provides a leak-proof seal with the barrel.
-
PS-Cuvette Macro 1000 pieces
PerkinElmerDisposable cells are available in polystyrene and polymethyl methacrylate either as macro or semi-micro cells. Additionally, disposable cells are available in a special UV transparent material in macro, semi-micro and micro cells. The useful spectral range for UV material is between 220 and 900 nm,…
-
These tubes are fit to perform on atomic absorption (AA) instruments for Agilent and is equivalent to Agilent/Varian part 63-100012-00. PerkinElmer supplies a wide range of graphite tubes for non-PerkinElmer instrumentation. Graphite tubes are made with the highest quality material guaranteed to…
-
-
The PerkinElmer Sample Tray for PerkinElmer AS-93 plus/S10 Autosampler with 60 locations for 15 mL solution containers.
-
PerkinElmer closures are manufactured to specific tolerances that are guaranteed to fit and perform with PerkinElmer and non-PerkinElmer instruments. I.D.: 9 mm Finish: Screw Top Cap with Septa Description: PTFE/Silicone Pre-slit Septa with Blue Cap This Cap and Septa is also available in…
-
Rectangular Long Path Cell Holder
PerkinElmerThe Rectangular Long-Path Cell Holder accepts cells with pathlengths from 10 to 100 mm. This optional cell holder is easy to install and has the same footprint as the Standard Cell Holder. It is designed for a precise fit and gives you maximum reproducibility.
-
Bue polypropylene plugs used with 15 mL polypropylene tubes (N0777167).
-
-
PTFE Membrane
PerkinElmerModular “building block” type gas-liquid separator made from chemically-resistant plastic. An exchangeable PTFE membrane in the screw cap of the separator prevents liquid from being carried into the quartz cell when working with strong foaming samples.
-
A complete GemTip High-Sensitivity plastic body nebulizer with Viton o-rings for PerkinElmer AAnalyst 100/300/700/800 and Model 5100PC/5000/3300/3110/3100 AA instruments. This nebulizer was designed to obtain optimum sensitivity, detection limits and precision with flame atomic absorption for both…
-
Excitation/Emission Polarization Accessory
PerkinElmerConsists of two filter wheels, each with horizontal and vertical polarizing films installed. The excitation and emission polarizer positions are software-controlled and can be independently set or automatically calculated for polarization, anisotropy or G-factor. Requires, but does not include,…
-
Bone Platform, Pyrolytic Graphite for Agilent
PerkinElmerThe Bone Platform for Agilent® is made of pyrolytic graphite for use in the Plateau Graphite Tube for Agilent®. It is 12x4.6x1 mm and comes in a quantity of 10. The platform is fit to perform on atomic absorption (AA) instruments for Agilent® and is equivalent to Agilent® part 63-100013-00.
-
CTFE rotor for 6 port low-flow valve (0.4mm bore)
-
PerkinElmer is expanding its compressor product portfolio to include an industrial grade, quite, oil-less compressor for dependable and clean air supply. With the addition of a water separator with a 5 micron particle filter, no liquid transfers into the air supply, providing you with contaminant…
-
PerkinElmer offers a wide range of high-quality peristaltic pump tubing for all of your ICP-OES and ICP-MS applications. Remember to replace your tubing frequently and always keep spares on hand.
-
-
-
Combining two different requirements into one cell allows a myriad of different sampling applications. Two cells in one- Demountable and Sealed Cell. Easily disassembled for cleaning. For Liquid Samples: After assembling the cell, you can introduce the liquid sample through injection ports that…
-
Liquid Chromatography Tubing
PerkinElmerThe PerkinElmer 20 cm liquid chromatography tubing is made from sturdy stainless steel material and provides added durability.
-
MP2 Two-Stop Peristaltic Pump Tubing
PerkinElmerThe PerkinElmer orange/red peristaltic pump tubing has a two-stop design and is made from PVC material.
-