PerkinElmer, General Chromatography, Supplies
-
Optima/Avio Solution Kit
PerkinElmerMixed Calibration Standard 2% HNO3, 500 mL (N0691579) 50 µg/mL: As, K 10 µg/mL: La, Li, Mn, Ni, Sr, Zn 1 µg/mL: Ba, Mg 2% HNO3, 125 mL (N0773120) In ASTM ® Type I Water 5% HNO3, 125 mL (N9300221) 100 µg/mL: As, Tl 50 µg/mL: Cd, Pb, Se Vis Wavecal…
-
-
Replacement Reed Valve for oil free Compressor
PerkinElmerReplacement Reed Valve for oil free Compressor
-
The rotor seal is the polymeric disc that makes a high pressure seal against the stator. The seal wears with use and is one of theonly parts that may need routine replacement. Stators need replacement only if the ports become damaged. Vespel blend rotor seals have an operating pH range from 0 to…
-
The Silicon (Si) Metallo-Organic Standard is available from PerkinElmer and ideal for an array of ICP-MS applications.
-
Tubing Adapters and Connectors provide a means to connect the component shown to the screw fittings of the PTFE tubing assemblies or to connect the tubing components described.
-
Torch O-Ring Kit for ELAN 6000/5000
PerkinElmerIncludes four O-Rings for injector support/ torch base.
-
V-Solv ICP Solvent - 5 Gallon
PerkinElmerV-Solv ™ ICP Solvent 5 gallon is a proprietary solvent that is used for diluting oil and other organic liquids for analysis by ICP and ICP-MS. Use V-Solv ™ as a matrix blank and as a diluent for your calibration standards and samples for outstanding nebulization characteristics. V-Solv ™ ICP…
-
UV WinLab Enhanced Security Software for UV/Vis
PerkinElmerHigh Performance UV/Vis and UV/Vis/NIR spectrophotometers. Designed for busy pharmaceutical, manufacturing, industrial, food, or academic laboratories that require efficient operation combined with a wide-range of capabilities, this comprehensive package is designed for simplicity and efficiency in…
-
Multi-Element Standard Vol 2% HNO3 /per 500 mL
PerkinElmerOur go-to multi-element standards are suitable for your daily laboratory needs. Spanning across a wide range of applications and methods, you’ll nd the right solution to help you achieve laboratory success.
-
-
-
Adapter N, 1/4in (6.4 mm) External Screw Thread, 0.7mm Outer Diameter Pt/Ir Capillary Nipple for FIAS-100, FIAS-400, and FIAS-400MS
-
Sapphire Injector 1.8 mm (Cassette) in PFA Base
PerkinElmerSapphire injector HF-resistant Size: 1.8 mm
-
Quartz SUPRASIL Semi-micro with PTFE Lid
PerkinElmerSemi-micro cells have the same outside dimensions as the macro cells but the cell walls have been thickened slightly, limiting the interior sample chamber width to 4 mm. This reduces the sample requirements by 60%. Each package contains two cells with two clear windows each.
-
Alumina injectors are corrosion-resistant to all mineral acids including HF and aqua regia. They are also used with less volatile organic solvents, e.g., xylene. The 2.0 mm i.d. Alumina injector is shipped standard with all PerkinElmer ICP-OES instruments. A variety of sizes are available as an…
-
DTA Calibration Reference Material, Palladium, Transition Point: 1551.85C
-
Ytterbium 1 µg/mL Single Element Pure Standard
PerkinElmerEach standard is supplied with a comprehensive Certificate of Analysis that documents its quality and reliability. Each standard: Analyzed by ICP-OES Analyzed by Classical Wet Assay 32 trace impurities analyzed by ICP-MS of the final solution and reported on the certificate Impurities…
-
PerkinElmer has over four decades of experience in the design/development of graphite furnace systems and materials. The proper performance, maintenance and serviceability of our graphite furnace systems can be assured only through the use of genuine PerkinElmer supplied graphite components such as…
-
1.8 mm Sapphire injector for Optima 8000 Series
PerkinElmerPlease note: Compatible with ESI press-fit PFA spray chamber connection.
-
Multi-element Calibration Standard 3, Matrix per Volume: 5% HNO3 per 125 mL, Concentration of Element: 10µg/mL Silver 10µg/mL Aluminium 10µg/mL Arsenic 10µg/mL Barium 10µg/mL Beryllium 10µg/mL Bismuth 10µg/mL Calcium 10µg/mL Cadmium 10µg/mL Cobalt 10µg/mL Chromium 10µg/mL Cesium …
-
Oil Standard Copper Concentration 1000 µg/g -50g
PerkinElmerWe carry the Copper (Cu) Metallo-Organic Standard, ideal for many ICP-OES applications.
-
Metal Additive Standard 4 -400g
PerkinElmerMatrix: Hydrocarbon Oil Description: Ca @ 5000 µg/g; Mg, P, Zn @ 1600 µg/g Size: 400 g
-
O-Ring for Furnace Window
PerkinElmerIt is strongly recommended that separate mixingmanifolds, gas-liquid separators, quartz cells, and required tubingand connectors be dedicated for use with each reducing agent. Canbe used with AmAmalgamation Systems and Flow Injection MercurySystems.
-
-
This kit includes: Injector Adapter Washer (N0776014) Cyclonic/Concentric Injector Adaptor O-Ring Kit (N0790441)
-
Quartz, 1.2 mm i.d.
PerkinElmerThis injector is for aqueous applications. It is a tapered injector. The ID is 6mm and at the tip of the injector, it tapers to 1. 2.
-
Metal Additive Standard 4 -200g
PerkinElmerMatrix: Hydrocarbon Oil Description: Ca @ 5000 µg/g; Mg, P, Zn @ 1600 µg/g Size: 200 g
-
The Mercury (Hg) Metallo-Organic Standard from PerkinElmer is suitable for a range of ICP-MS applications.
-
-
Scandium 1 µg/mL Single Element Pure Standard
PerkinElmerEach standard is supplied with a comprehensive Certificate of Analysis that documents its quality and reliability. Each standard: Analyzed by ICP-OES Analyzed by Classical Wet Assay 32 trace impurities analyzed by ICP-MS of the final solution and reported on the certificate Impurities…
-
1.5 mL sample loop, 1 mm i.d.
PerkinElmerMultipurpose PFA FAST loops for high-flow valves. Recommended for use with 1.0 mm i.d. (gray) probe. 1.6 mm o.d., 1/4-28 fittings.