Standard portable meters with no frills! Milwaukee’s low cost durable meters for quick and reliable measurements. Milwaukee’s Standard meters are manufactured to be easy to use, practical and accurate. Ideal for the classroom, laboratory or for general field use. MW102 is a…

The Milwaukee MI0021 are plastic 25 mL beakers for sample testing and preparation. Set of four per package. The peristaltic tubing for the Mi455 and Mi456 mini titrators stretches over time. This stretching eventually results in a failed calibration. This is resolves by replacing the tubing as part…

Standard portable meters with no frills! Milwaukee’s durable meters for quick and reliable measurements. Milwaukee’s Standard meters are manufactured to be easy to use, practical and accurate. Ideal for the classroom, laboratory or for general field use. MW100 performs pH…

3 meters in 1! This meter allows you to measure pH, EC (conductivity) and TDS with just one instrument and one single probe! The MW802, with a conductivity range that goes up to 6.00 mS/cm and the TDS up to 4000 ppm is ideal for testing in crop production. Soil and well water pH that is too…

The MA887 is an optical instrument that employs the measurement of the refractive index to determine the salinity of natural and artificial seawater, ocean water or brackish intermediates. The digital refractometer eliminates the uncertainty associated with mechanical refractometers and is…

The Milwaukee MW105 MAX Waterproof 3-in-1 pH/OPR/Temp. meter has won fans around the world with its reliable, fast and simple operation as well as its toughness and IP67 Waterproof rating. Accurate to ± 0.02 pH with automatic or manual temperature compensation and built in GLP key. Ideal for…

Control the pH of your tank/reservoir AUTOMATICALLY! The MC122 pH controller and dosing pump (MP810) provides fully automated pH control of aqueous solutions in hydroponic systems. It has been specifically designed to control the pH in mixing tanks for fertilization. The small and precise…

3 meters in 1! This meter allows you to measure pH, EC (conductivity) and TDS with just one instrument and one single probe! The AG900, with a conductivity range that goes up to 6.00 mS/cm and the TDS up to 4000 ppm is ideal for testing in crop production. Soil and well water pH that is too…

Mi456 is a user-friendly microprocessor-based mini-titrator for the determination of the titratable total acidity in the process of wine making. This minititrator gives you direct readings in g/L of tartaric acid, with a range of 0.0 to 25.0 g/L. The instrument comes with a pre-programmed…

The MA885 is optical instrument that is based on the measurement of the refractive index of a solution. The measurement of refractive index is simple and quick and provides the vintner an accepted method for sugar content analysis. Samples are measured after a simple user calibration with steam…

Standard portable meters with no frills! Milwaukee’s durable meters for quick and reliable measurements. Milwaukee’s Standard meters are manufactured to be easy to use, practical and accurate. Ideal for the classroom, laboratory or for general field use. MW101 performs pH…

The pH600 is a pH tester can be used in many different applications and is considered an excellent starter unit for digital pH measurement. The calibration procedure is very simple and fast. This tester has 1 point manual calibration, ±0.1 pH accuracy and a range of 0.0 to 14.0 pH. The…

The Milwaukee MI0001 are replacement glass cuvettes for Milwaukee photometers. Set of two per box. The Milwaukee MI0011 are replacement glass cuvettes for Milwaukee turbidity photometer MI415. The Milwaukee MI0002 are plastic replacement caps for the MI0001 cuvettes for Milwaukee photometers. The…

Mi455 is a user-friendly microprocessor-based mini-titrator for the determination of free and total sulphur dioxide in the process of wine making. This mini-titrator will give you direct readings with a range of 0 to 400 ppm. The instrument comes with a pre-programmed analysis method for free and…

This high performance economy microprocessor-based pH/ORP/Temp Bench meter is an ideal tool in schools, laboratories and production plants. It is provided with a series of new diagnostic features which add an entirely new dimension to the measurement of pH, by allowing the user to dramatically…

Combination waterproof testers with advanced functions also include the new model pH58 for simultaneous pH and ORP measurements and temperature, which is continuously displayed on the dual level LCD. It shows readings in an extended range from -2.00 to 16.00 pH or ±1000 mV and…

The Milwaukee MW180 5-in-1 MAX pH/ORP/EC/TDS/NaCl/Temp. Logging Bench Meter has won fans around the world with its reliable, fast and simple operation as well as its tough, sleek design and small benchtop footprint. It is accurate to ± 1% of reading for EC/TDS/NaCl and up to +/-0.002…

The MA884 is optical instrument that is based on the measurement of the refractive index of a solution. The measurement of refractive index is simple and quick and provides the vintner an accepted method for sugar content analysis. Samples are measured after a simple user calibration with steam…

Standard ORP mini-bench meter for quick and reliable measurements. Factory calibrated Faster Processor with The New Chipset and Motherboard 100% Larger & Easier To Read LED Display Smaller, Ergonomic & Lighter Case Design Includes 9vDC power supply, mounting Kit, SE300…

With each Milwaukee Smart controller, your aquarium will have the individual attention that it needs. Each unit comes with 12 VDC adapter, mounting kit, probe, probe holder and starter calibration solution for pH. (factory calibrated for ORP) Smart Professional ORP controller. …

With Milwaukee's MC Controllers you can monitor and control pH and/or ORP levels. The Milwaukee Instruments "MC" Controllers have a user selectable set point and a visual "Power Activated" LED notification light. Power to the controller box is turned on when the reading…

The MA871 is an optical instrument that employs the measurement of refractive index to determine the % Brix of sugar in aqueous solutions. The method is both simple and quick. Samples are measured after a simple user calibration with steam distilled water (starter bottle provided with your…

pH55 IP65 Waterproof pH tester with Large dual-level LCD that displays pH and temperature (°C or °F). The large display shows readings in an extended range from -2.0 to 16.0 pH and simultaneously shows temperature from -5.0 to 105.0°C or 23.0 to 221.0°F. pH56 IP65 Waterproof pH…

The MC Monitors are designed to continuously monitor pH, EC or TDS values directly in your reservoir. Each unit features a user selectable set-point. An LED visual alarm is activated and flashes when the pH, EC or TDS level rises either Above or Below (user selected) that set-point. All these…

Thomas No. 1188J13: Hard Carrying Case (Small "Lunch Box" Size) for use with MW Portable Meters, Protective Case for the following "MW" Series Meters -- MW100 - MW101 - MW102 - MW301 - MW302 - MW401 - MW402 - MW500 Thomas No. 1188J14: Hard Carrying Case (Thin Brief Case Size) with Interior…

Standard portable meters with no frills! Milwaukee’s low cost durable meters for quick and reliable measurements. Milwaukee’s Standard meters are manufactured to be easy to use, practical and accurate. Ideal for the classroom, laboratory or for general field use. MW500…

IP65 Waterproof pH tester with Large dual-level LCD that displays ORP and temperature (°C or °F). The large display shows readings from -1000 to +1000 (with a resolution of 1 mV) and simultaneously shows temperature from -5.0 to 105.0°C or 23.0 to 221.0°F. ORP57 has a stability…

3 meters in 1! This meter allows you to measure pH, EC (conductivity) and TDS with just one instrument and one single probe! The MW801 with a Conductivity range that goes up to 1990 µS/cm and TDS range that goes up to 1990 ppm is an ideal tool for drinking water measurements. MW801…

With Milwaukee's MC Controllers you can monitor and control pH and/or ORP levels. The Milwaukee Instruments "MC" Controllers have a user selectable set point and a visual "Power Activated" LED notification light. Power to the controller box is turned on when the reading…

The MA886 digital refractometer uses the refractive index to determine sodium chloride concentration in aqueous solutions used in food preparation. The MA886 is not designed for measuring salinity in sea or aquarium water. Use MA887 for this application. The MA886 utilizes internationally…