MilliporeSigma, 100 mL, Bottle, Poly
-
Synonym(s): Tetrabutylammonium dihydrogen phosphate Formula: (CH3CH2CH2CH2)4N[OP(OH)2O] Formula Weight: 339.45 CAS No.: 5574-97-0 Density: 1.037g/mLat 25°C Application: Anion used to probe the structure,…
-
UN No.: 3264 pH: 0.5 (H2O, 20°C) Solubility: (20°C) soluble Density: 1.013 g/cm3 (20°C) Ignition Point: 0.5 (H2O, 20°C)
-
4-Methyl-2-Pentanol For Synthesis
MilliporeSigmaCAS No.: 108-11-2 UN No.: UN2053 Solubility: 16.4 g/l (20°C) Melting Point: -60°C Molar Mass: 102.18 g/mol Boiling Point: 130 - 133°C (1013 hPa) Vapor Pressure: 7.06 hPa (25°C) Flash Point: 41°C Refractive Index: 41°C Explosion Limit: 1 - 5.5 %(V) Density: 0.81 g/cm3…
-
UN No.: 3264 pH: 0.5 (H2O, 20°C) Solubility: (20°C) not applicable Density: 1.013 g/cm3 (20°C) Ignition Point: 0.5 (H2O, 20°C)
-
Dimethyl phthalate for synthesis
MilliporeSigmaSynonyms: Phthalic acid dimethyl ester Chemical Formula: C6H4-1,2-(COOCH3)2 Hill Formula: C10H10O4 CAS Number: 131-11-3
-
UN No.: 3264 pH: (H2O, 20°C) Solubility: (20°C) soluble Density: 1.014 g/cm3 (20°C) Ignition Point: (H2O, 20°C)
-
UN No.: 3264 pH: (H2O, 20°C) Solubility: (20°C) soluble Density: 1.016 g/cm3 (20°C) Ignition Point: (H2O, 20°C)
-
UN No.: 3264 pH: 0.5 (H2O, 20°C) Solubility: (20°C) soluble Density: 1.015 g/cm3 (20°C) Ignition Point: 0.5 (H2O, 20°C)
-
UN No.: 3264 pH: 0.5 (H2O, 20°C) Solubility: (20°C) soluble Density: 1.02 g/cm3 (20°C) Ignition Point: 0.5 (H2O, 20°C)
-
CAS No.: 8042-47-5 Density: 0.84g/mLat 25°C(lit.) Application: Recommended for overlaying mouse embryo cultures to prevent drying. Analysis Note: This material is tested as an overlay in microdrop embryo cultures. (All embryo tested materials are tested using mouse embryos.)…
-
Silicon ICP Standard, 1000 ppm
MilliporeSigma1 mL = 1 mg Si (1,000 ppm Si) Si in 3% HNO3 / trace HF
-
UN No.: 3264 pH: 0.5 (H2O, 20°C) Solubility: (20°C) soluble Density: 1.02 g/cm3 (20°C) Ignition Point: 0.5 (H2O, 20°C)
-
TE Buffer Solution pH 8.0
MilliporeSigmaFormula Weight: CAS Number: Tris: 77-86-1, Boric Acid: 10043-35-3 EDTA: 6381-92-6 Synonym(s): TRIS-EDTA Buffer Description: Each liter of concentrate makes 5L of 1X TBE
-
UN No.: 3264 pH: 0.5 (H2O, 20°C) Density: 1.02 g/cm3 (20°C) Ignition Point: 0.5 (H2O, 20°C)
-
UN No.: 3264 pH: (H2O, 20°C) Density: 1.038 g/cm3 (20°C) Ignition Point: (H2O, 20°C)
-
Glutardialdehyde (25% Solution In Water) For Synthesis
MilliporeSigmapH: >3.0 (H2O, 20°C) Solubility: (20°C) soluble Melting Point: -6°C Boiling Point: 100.5°C (1013 hPa) Vapor Pressure: 0.27 hPa (20°C) Density: 1.06 g/cm3 (20°C) Ignition Point: 275°C
-
Arsenic ICP Standard
MilliporeSigmaFormula: As in 3% HNO3 Formula Weight: N/A Description: Composition: H3AsO4 in HNO3 2-3%
-
Ethyl Acetoacetate For Synthesis
MilliporeSigmaSynonyms: Ethyl acetoacetate; EAA, Acetoacetic acid ethyl ester Molecular Formula: C6H10O3 Molecular Weight: 130.14 Linear Structural Formula: C6H10O3 MDL Number: MFCD00009199 Purity: >=98.0% (GC) Melting Point: -53.3 C Density: 1.03 g/cm3 at 20 C
-
UN No.: 3264 pH: 0.5 (H2O, 20°C) Solubility: (20°C) soluble Density: 1.014 g/cm3 (20°C) Ignition Point: 0.5 (H2O, 20°C)
-
Tetraethylammonium hydroxide solution, 35 wt. % in H2O
MilliporeSigmaSynonyms: TEAOH solution; TEA hydroxide CAS Number: 77-98-5 Formula: C8H21NO Formula Weight: 147.26 Linear Formula: (C2H5)4N(OH) MDL No.: MFCD00009024 Density: 1.023 g/mL at 25 C Refractive Index: n20/D 1.404 Beilstein Registry Number: 3912961 UNSPSC Code: 12352000 …
-
UN No.: 3264 pH: 0.5 (H2O, 20°C) Solubility: (20°C) soluble Density: 1.015 g/cm3 (20°C) Ignition Point: 0.5 (H2O, 20°C)
-
ALDRICH Dibutyl phthalate, 99%
MilliporeSigmaDibutyl phthalate (DBP) is most commonly used as a plasticizer in a variety of household products. It has the ability to leach and evaporate into the environment while using or disposing of these products. Therefore, studies are being conducted to assess its toxic and apoptotic effects. Studies…
-
UN No.: 3264 pH: 0.5 (H2O, 20°C) Solubility: (20°C) soluble Density: 1.013 g/cm3 (20°C) Ignition Point: 0.5 (H2O, 20°C)
-
UN No.: 2031 pH: (H2O, 20°C) Density: 1.031 g/cm3 (20°C) Ignition Point: (H2O, 20°C)
-
UN No.: 3264 pH: 0.5 (H2O, 20°C) Solubility: (20°C) soluble Density: 1.013 g/cm3 (20°C) Ignition Point: 0.5 (H2O, 20°C)
-
OmniPur® Water, DEPC Treated Sterile Nuclease-Free
MilliporeSigmaFormula: H2O Formula Weight: 18.02 CAS Number: Synonym(s): DEPC Water Description: General Product Use: Prepared with DEPC for RNA applications.
-