MilliporeSigma, Supplies, UN1993
-
Anisole-(methyl-d3) 99 atom % D
MilliporeSigmaSynonyms: Methoxy-d3-benzene Molecular Formula: C7D3H5O Molecular Weight: 111.16 Linear Structural Formula: C6H5OCD3 MDL Number: MFCD00074930 Melting Point: -37 C (lit.) Density: 1.023 g/mL at 25 C Refractive Index: n20/D 1.5164 (lit.)
-
Trimethoxy[3-(methylamino)propyl]silane 95%
MilliporeSigmaTrimethoxy[3-(methylamino)propyl]silane (MAPTMS) is an aminoalkyltrimethoxysilane that can be used for silanization surface immobilization. Synonyms: N-Methyl-3-(trimethoxysilyl)propylamine; [3-(Methylamino)propyl]trimethoxysilane Molecular Formula: C7H19NO3Si Molecular Weight: 193.32 …
-
A-Phellandrene For Synthesis
MilliporeSigmaCAS No.: 99-83-2 UN No.: UN1993 pH: (H2O, 20°C) neutral Solubility: 2.86 mg/l (25°C) Molar Mass: 136.23 g/mol Boiling Point: 175°C (1013 hPa) Flash Point: 47°C Refractive Index: 47°C Density: 0.84 g/cm3 (20°C)
-
Lithium hexafluorophosphate solution in ethylmethyl carbonate is a class of electrolytic materials that can be used in the fabrication of lithium-ion batteries. Lithium-ion batteries consist of anode, cathode, and electrolyte with a charge-discharge cycle. These materials enable the formation of…
-
Trimethylphosphine solution 1.0 M in 2-methyltetrahydrofuran
MilliporeSigmaSynonyms: Trimethylphosphane; PMe3; Trimethylphosphorus Molecular Formula: C3H9P Molecular Weight: 76.08 Linear Structural Formula: (CH3)3P MDL Number: MFCD00008510 Density: 0.838 g/mL Application: Trimethylphosphine is an electron-rich phosphine ligand used in the…
-
Synonyms: AZO ink; Al-doped ZnO dispersion; Al-dopend ZnO suspension; Al:ZnO ink; Avantama N-21X; Nanograde N-21X Application: Al-doped ZnO nanoparticle ink is for spin coating and doctor blading for the use as electron transport layer in printed electronics. Al-doped ZnO nanoparticle ink is…
-
2,2-Dimethoxypropane For Synthesis
MilliporeSigmaCAS No.: 77-76-9 UN No.: UN1993 Solubility: 180 g/l (20°C) Melting Point: -47°C Molar Mass: 104.15 g/mol Boiling Point: 80°C Vapor Pressure: 60 hPa (16°C) Flash Point: -10°C Refractive Index: -10°C Explosion Limit: 6 - 31 %(V) Density: 0.85 g/cm3 (20°C)
-
Methyl phenyl sulfide for synthesis
MilliporeSigmaCAS Number: 100-68-5 UN Number: UN1993 Solubility: 0.5 g/l (25°C) Melting Point: -15°C Molar Mass: 124.21 g/mol Boiling Point: 188°C (1013 hPa) Flash Point: 57°C Refractive Index: 1.5842 (25°C, 589 nm) Density: 1.05 g/cm3 (20°C)
-
We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product has been enhanced for energy efficiency. Find details here. Synonyms: 1.0 M LiPF6 EMC; 1.0 M LiPF6 MEC Linear Structural Formula: LiPF6 MDL…
-
Cap B2 configured for (ÄKTA(R) and OligoPilot(R))
MilliporeSigmaSynonyms: Cap B Purity: conforms (Formulation, GC) Legal Information: ÄKTA is a registered trademark of Cytiva Other Notes: Cap B2 solution, containing acetonitrile (ACN) and pyridine, is mixed in situ with Cap A and Cap B1 solution during the capping (acetylation) reaction. Pyridine…
-
tert-Amylbenzene >=99%, H2O <100 ppm, acid <200 ppm
MilliporeSigmaSynonyms: 2-Methyl-2-phenylbutane; tert-Pentylbenzene Molecular Formula: C11H16 Molecular Weight: 148.24 Linear Structural Formula: C11H16 MDL Number: MFCD00015187 Purity: >=99% Application: The presence of electrolyte additives enhances the performance of lithium ion…
-
Lithium hexafluorophosphate solution in ethylene carbonate and dimethyl carbonate is a class of electrolytic solution that can be used in the fabrication of lithium-ion batteries. Lithium-ion batteries consist of anode, cathode, and electrolyte with a charge-discharge cycle. These materials enable…
-
(Methylamino)acetonitrile AldrichCPR
MilliporeSigmaMolecular Formula: C3H6N2 Molecular Weight: 70.09 Linear Structural Formula: C3H6N2 MDL Number: MFCD00058964 Other Notes: Please note that Sigma-Aldrich provides this product to early discovery researchers as part of a collection of unique chemicals. Sigma-Aldrich does not collect…
-
Organophosphorus Pesticides (Low Level) - PT - Water Pollution (WP) proficiency testing material is produced in accordance with ISO/IEC 17043:2010. The PT portfolio allows our test components to offer significant performance data to monitor and prove competency to customers, accreditation bodies or…
-
Synonyms: AZO ink; Al-doped ZnO dispersion; Al-dopend ZnO suspension; Al:ZnO ink; Avantama N-21X-Jet; Nanograde N-21X-Jet Application: Al-doped ZnO nanoparticle ink is for inkjet printing for the use as electron transport layer in printed electronics. Al-doped ZnO nanoparticle ink is…
-
SunTronic EMD5730 is formulated for inkjet printing of conductive traces onto a variety of substrates. EMD5730 is a solvent-based silver nanoparticle ink which demonstrates superior conductivity, stable jetting performance and adhesion to ITO coated glass.EMD5730 can be used in the manufacture of…
-
Synonyms: (2S)-2-Hydroxypropionaldehyde dimethyl acetal; (S)-1,1-Dimethoxy-2-hydroxypropane; (S)-Lactaldehyde dimethyl acetal Molecular Formula: C5H12O3 Molecular Weight: 120.15 Linear Structural Formula: C5H12O3 MDL Number: MFCD07778452 Purity: >=99.0% (sum of enantiomers, GC)…
-
Silver nanoparticles ink for inkjet printing
MilliporeSigmaSmart'Ink S-CS01130 conductive ink was developed for the printed electronics, is particularly well suited for applications requiring high conductivity and high resolution. This ink, based on silver, is perfectly adapted to design conductive traces on flexible substrates. Also, it is shaped for IoT…
-
Acetonitrile/TFA, Mobile Phase 0.05%
MilliporeSigmaStabilized with Ethanol Synonyms: Trichloromethane Formula: CHCl3 Formula Weight: 119.38 CAS Number: 67-66-3
-
Synonyms: 5-(Ethylthio)-1H-tetrazole; 5-(Ethylthio)tetrazole solution MDL Number: MFCD00068733 Purity: 32-35 g/L (ETT content, titration) Other Notes: Activator solution, containing 5-(Ethylthio)-1H- tetrazole (ETT) in acetonitrile, are mixed with solutions of phosphoramidites during…
-
This product is provided as delivered and specified by the issuing Pharmacopoeia. All information provided in support of this product, including SDS and any product information leaflets have been developed and issued under the Authority of the issuing Pharmacopoeia.For further information and…
-
Bromohexane (mixtures of isomeres) for synthesis
MilliporeSigmaSynonyms: Hexyl bromide Chemical Formula: CH3(CH2)3CHBrCH3 Hill Formula: C6H13Br CAS Number: 3377-86-4 UN Number: UN1993
-
1-Bromohexane for synthesis
MilliporeSigmaSynonyms: Hexyl bromide Chemical Formula: CH3(CH2)5Br Hill Formula: C6H13Br CAS Number: 111-25-1 UN Number: UN1993
-
Empirical Formula: C6H11ClO2 Linear Formula: C6H11ClO2 Formula Weight: 150.60 MDL Number: MFCD00273365 Purity: 98% Boiling Point: 63 °C/37 mmHg(lit.) Density: 1.103 g/mL at…
-
Oxidizer 0.02 M, configured for ABI
MilliporeSigmaMDL Number: MFCD00677190 Purity: 3.9-4.7 g/L (Iodine content, titration) Other Notes: Oxidizer solution, containing tetrahydrofuran (THF), pyridine, iodine and water, is applied to oxidize the chemically unstable trivalent phosphorous triester linkage formed in the coupling reaction to a…
-
SLAP TA 95%
MilliporeSigmaSynonyms: 3-(((Trimethylsilyl)methyl)thio)propan-1-amine Molecular Formula: C7H19NSSi Molecular Weight: 177.38 Linear Structural Formula: C7H19NSSi Purity: 95% Density: 0.90452 Storage: 2-8C Application: When used with aliphatic or aromatic aldehydes, this silicon amine…
-
This product is provided as delivered and specified by the issuing Pharmacopoeia. All information provided in support of this product, including SDS and any product information leaflets have been developed and issued under the Authority of the issuing Pharmacopoeia.For further information and…
-
PNAs - WS Proficiency Testing Material
MilliporeSigmaThis proficiency testing sample is produced in accordance with ISO/IEC 17043:2010. All information regarding the use of this material can be found in the reporting packet which will be available to download at Supelco-PT.com. Storage: 2-8C
-
Dioxins and Furans in water by 8280 proficiency testing material is produced in accordance with ISO/IEC 17043:2010. This product is also referred to as non-Potable water or Water Pollution sample. The PT portfolio allows our test components to offer significant performance data to monitor and prove…
-
Acetonitrile/Formic Acid, Mobile Phase 0.1%
MilliporeSigmaMeets ACS Specifications, Meets Reagent Specifications for testing USP/NF monographs Formula: CaCl2 Formula Weight: 110.98 CAS Number: 10043-52-4
-
1-Iodobutane For Synthesis
MilliporeSigmaCAS No.: 542-69-8 UN No.: UN1993 Solubility: 0.2 g/l (20°C) Melting Point: -103°C Molar Mass: 184.02 g/mol Boiling Point: 130°C (1013 hPa) Vapor Pressure: 18.5 hPa (25°C) Flash Point: 33°C Refractive Index: 33°C Density: 1.62 g/cm3 (20°C)