MilliporeSigma, CE and CE/MS, Vials
-
Inserts for 2 mL large opening vials
MilliporeSigmaInsert fits 12 x 32 mm vials with large opening (6.0 mm)
-
Insert for 2 mL standard opening vial
MilliporeSigmaVial inserts basically permit the use of smaller sample volumes with standard autosampler vials. Inserts are generally chosen based on the inner diameter of the vial neck. Standard opening vials (4.6 mm ID) require a 5 mm OD insert.
-
Crimp seals (magnetic) with PTFE/silicone septa
MilliporeSigma•Thinner liner for easier penetration •Special PTFE/silicone liner with only 0.05mm PTFE film (easier penetration that thicker PTFE) •These products should be used with the SPME vial that has a thicker lip Other Notes: Recommended for: CTC Combi-PAL.
-
Closures for Snap Ring vials
MilliporeSigmaPTFE/silicone (with starburst), polypropylene seal Snap Ring cap eliminates the need for crimping. Closures provide an airtight seal and are ideal for use with volatile liquids.
-
Headspace vial, clear glass
MilliporeSigmaApplication: Headspace vial may be used in storing samples for stability analysis of freeze dried and fluid bed dried alginate microcapsules coated with chitosan containing model probiotic bacteria, Lactobacillus plantarum.
-
Inserts for 2 mL large opening vials
MilliporeSigmaInsert fits 12 x 32 mm vials with large opening (6.0 mm)
-
Vials for Waters® 96-position carousel
MilliporeSigmaThis vial is designed to work in the Waters WISP(TM) 96 Position Autosampler. Avialable in clear Type 1 borosilicate glass. Vials feature thicker walls for safer sample handling. Please order your closure separately. Legal Information: Waters is a registered trademark of Waters
-
Mininert® Valve, screw thread
MilliporeSigmaThese valves are very easy to use. 1. Push the green button to open the valve2. Insert the needle through the septum and take sample3. Remove the needle and push to close Benefits include: •PTFE construction for inertness. PTFE is useful when working when acids and organic solvents. •Good sealing…
-
Vials, screw top, clear glass (vial only)
MilliporeSigmaApplication Clear glass, screw top vials with hole-cap PTFE/silicone septa may be used, to contain plant tissue in an experimental study done in order to identify major volatiles emanating from chestnut reproductive plant tissue.
-
Septa, PTFE/Silicone red PTFE/white silicone
MilliporeSigmaIt is used as an air-tight seal, and prevents contamintion
-
Certified QSertVial(TM) (vial with fused-in insert) kit
MilliporeSigmaThe QSertVial(TM) is the ultimate microsampling device. It contains a 300 muL glass insert that is fused to the vial to form one precise integral unit. The rim of the insert is positioned slightly above the top of the vial so the septum can make a secure seal with the closure, eliminating…
-
Septa, Blue PTFE/white silicone
MilliporeSigmaPTFE/Silicone is recommended for use with most organic solvents until PTFE is pierced. It has good resealability and can withstand a temperature of 250C.
-
Mininert® Valve, screw thread
MilliporeSigmaThese valves are very easy to use. 1. Push the green button to open the valve2. Insert the needle through the septum and take sample3. Remove the needle and push to close Benefits include: •PTFE construction for inertness. PTFE is useful when working when acids and organic solvents. •Good sealing…
-
Screw cap
MilliporeSigmaGreen Thermoset Plastic Caps with F-217 PTFE Liners are known for providing the widest range of chemical compatibility and for being the most temperature tolerant of plastic closures. The color green easily identifies the PTFE liner system. F-217 foam-backed PTFE liners resist attack from virtually…
-
Short thread autosampler vial
MilliporeSigmaOther Notes: The inside diameter of vials vary with the manufacture. Only the following insert part numbers are compatible with these large opening vials. •SU860067 PK100 0.1ML GLASS CONICAL INSERT, 6 X 31MM •854988 PK1000 0.1ML GLASS CONICAL INSERT, 6 X 31MM •SU860066 PK100 0.1ML GLASS CONICAL…
-
-
Screw cap, solid top
MilliporeSigmaScrew caps are available as solid caps with aluminum liner. Caps are made from phenolic resin. Solid phenolic caps can withstand a maximum temperature of 205 C.
-
Vials, screw top
MilliporeSigmaVials (volume 15 mL, clear glass vial, O.D. x H 21 mm x 70 mm) are suitable basically to inject samples from an autosampler. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials. Synonyms: PK100 15ML CLEAR VIAL,SCREW TOP,SOLID…
-
These vials provide the advantage of a sealed ampule with the flexibility of a screw cap bottle or a septum vial. These unique, screw-cap sample containers with a 1.2 x 28mm height capillary opening are designed for the storage of volatile samples and reference standards. Advantages: •No…
-
Application: It may be used to cut and store fresh plant material for collecting volatiles in solid phase microextraction (SPME) technique. It may also be used in liquid chromatography-tandem mass spectrometry (LC-MS/MS) method for determining bisphenol A, 4-t-octylphenol and 4-nonylphenol in…
-
-
Septa, PTFE/Silicone transparent PTFE/silicone
MilliporeSigmaApplication: Septa, PTFE/Silicone have been used to seal the headspace vial in the determination of methylene chloride in urine samples by solid-phase microextraction technique combined with gas chromatography.
-
Screw cap, phenolic
MilliporeSigmaScrew caps (black phenolic hole cap, for use with 20 or 40 mL vial with 24-400 thread) are available as hole caps for use with sealing septa. Caps are offered in phenolic resin. Phenolic hole caps can withstand a maximum temperature of 149C.
-
Magnetic Screw Cap for Headspace Vials
MilliporeSigmaThis magnetic screw cap has been developed for the CTC instrument. The vial has a precision thread with numberous threads to force the septa against the vial to seal it to be gas tight. The center hole is designed to be used for SPME as well as standard Headspace analysis, but still offers enough…
-
Amber storage bottles
MilliporeSigmaAmber storage bottles (volume 120 mL, O.D. x H 49 mm x 114 mm, thread 22-400, bottle only) are primarily used to protect the stored sample from sunlight. Oxidation of various oils is prevented when packaged in amber glass bottles. Synonyms: AMBER SCREW-CAP BOTTLE ONLY 120ML PK12
-
Certified screw thread vials
MilliporeSigmaOther Notes: The inside diameter of vials vary with the manufacture. The following insert part numbers are compatible with these large opening vials. •29435-U PK100, Certified 200 muL glass inserts, mandrel precision point, 6 X 29mm, with bottom spring •29436-U PK100, Certified 250 muL glass…
-
Certified glass inserts
MilliporeSigmaOther Notes: Large opening inserts fits crimp seal, snap ring, and 9 mm threaded vials (with 6.0 mm ID)
-
Crimp Seal with PTFE/Butyl Septum (Pharma-Fix)
MilliporeSigmaPTFE-faced butyl septum was used in sealing headspace vials to analyse the sampling efficiency and breakthrough of methyl bromide on activated charcoal using GC. It was also used for sealing water samples during headspace analysis with GC-FID, in a study which demonstrates cross-validation of…
-
Vial crimp seals, BiMetal (magnetic)
MilliporeSigmaThe BiMetal caps are made of both tin and aluminum and are easier to crimp than tin 20mm seals. The sealing surface is aluminum and the inner diameter is made of tin to add the magnetic surface. These caps are available in a variety of colors. Other Notes: We recommend using the plier-type…
-
Vials, screw-top
MilliporeSigmaGraduated. Autoclavable borosilicate USP Type 1 glass. PTFE faced rubber septum. Legal Information: V-Vial is a registered trademark of Wheaton Industries, Inc.
-
Vials for Waters® 96-position carousel
MilliporeSigmaThis product is designed to work in the Waters WISP(TM) 96 Position Autosampler. Limited volume shell vials have a precisely designed conical bottom which permits maximum sample evacuation.Vials for waters® 96-position carousel, 8 x 40 mm is used for different life science applications. …
-
Headspace vial, screw top, rounded bottom
MilliporeSigmaThese vials require a special cap with an 18 mm thread. The standard 18-400 threaded caps will not fit this vial. The part numbers for caps that are available for these vials are SU860101(with PTFE/silicone, 1.3 mm thick), SU860102 (with PTFE/butyl, 1.6 mm thick), and SU860103 (with PTFE/silicone,…