MilliporeSigma, CE and CE/MS
-
Liquid scintillation vials
MilliporeSigmaWheaton 180 brand low-potassium glass yielding consistent low backgrounds and high UV transmission. White caps fit tightly and can be written on.
-
Screw cap
MilliporeSigmaGreen Thermoset Plastic Caps with F-217 PTFE Liners are known for providing the widest range of chemical compatibility and for being the most temperature tolerant of plastic closures. The color green easily identifies the PTFE liner system. F-217 foam-backed PTFE liners resist attack from virtually…
-
Crimp seal with PTFE/butyl septa aluminum seal
MilliporeSigmaCrimp seals, 11 mm, with PTFE/rubber septa are for use with 20 mm crimp top vials. The PTFE/rubber septa are compatible with most organic solvents many organic solvents: acetic acid (
-
Vials, crimp top
MilliporeSigmaThese vials are constructed of clear, borosilicate glass; closure not included.
-
Short thread autosampler vial
MilliporeSigmaOther Notes: The inside diameter of vials vary with the manufacture. Only the following insert part numbers are compatible with these large opening vials. •SU860067 PK100 0.1ML GLASS CONICAL INSERT, 6 X 31MM •854988 PK1000 0.1ML GLASS CONICAL INSERT, 6 X 31MM •SU860066 PK100 0.1ML GLASS CONICAL…
-
Liquid scintillation vials
MilliporeSigmaReliable Wheaton "180" brand low-potassium glass. White 22 mm caps have tops suitable for writing. Vials with caps attached are packed in individual cells in trays of 100.
-
Liquid scintillation vials
MilliporeSigmaWheaton 180 brand low-potassium glass yielding consistent low backgrounds and high UV transmission. White caps fit tightly and can be written on.
-
Vials, screw top
MilliporeSigmaVials are suitable basically to inject samples from an autosampler. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials. Screw top vials (volume 7 mL, clear glass vial, O.D. x H 17 mm x 60 mm, thread 15-425) are used on many…
-
Wheaton sample vials with rubber lined caps
MilliporeSigmaCaps have white styrene-butadiene rubber liner and are packed in Lab-File® cases. Clear Wheaton-33, low extractable borosilicate glass or amber Wheaton-320 glass. Can be sterilized and stored at low temperatures. Legal Information: Lab File is a registered trademark of Wheaton Industries, Inc.
-
Vials, screw top
MilliporeSigmaVials (volume 15 mL, clear glass vial, O.D. x H 21 mm x 70 mm) are suitable basically to inject samples from an autosampler. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials. Synonyms: PK100 15ML CLEAR VIAL,SCREW TOP,SOLID…
-
Screw cap, solid top
MilliporeSigmaGreen Thermoset Plastic Caps with F-217 PTFE Liners are known for providing the widest range of chemical compatibility and for being the most temperature tolerant of plastic closures. The color green easily identifies the PTFE liner system. F-217 foam-backed PTFE liners resist attack from virtually…
-
These vials provide the advantage of a sealed ampule with the flexibility of a screw cap bottle or a septum vial. These unique, screw-cap sample containers with a 1.2 x 28mm height capillary opening are designed for the storage of volatile samples and reference standards. Advantages: •No…
-
Vials, screw top
MilliporeSigmaVials (volume 7 mL, clear glass vial, O.D. x H 17 mm x 60 mm, tan PTFE/silicone septum) are suitable basically to inject samples from an autosampler. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials. Caps are made from phenolic…
-
Headspace vial, screw top, rounded bottom
MilliporeSigmaThese vials require a special cap with an 18 mm thread. The standard 18-400 threaded caps will not fit this vial. The part numbers for caps that are available for these vials are SU860101(with PTFE/silicone, 1.3 mm thick), SU860102 (with PTFE/butyl, 1.6 mm thick), and SU860103 (with PTFE/silicone,…
-
Vials, screw top
MilliporeSigmaApplication: Autoclavable, easy to maintain. A vial is used to store or as a closure type.
-
Septa, tan PTFE/silicone
MilliporeSigmaApplication: Septa, tan PTFE/silicone may be used in headspace solid-phase microextraction (SPME) (lyophilized aqueous extract).
-
MSQ(TM) Caps with Septa
MilliporeSigmaWe recommend using LA Vials with the MSQ polypropylene cap with PTFE/silicone septa. This cap and septa combination was purposely designed for use with mass spectrometry. It shows little to no background contamination when compared to other cap and septa products in the marketplace. Legal…
-
Screw cap
MilliporeSigmaGreen Thermoset Plastic Caps with F-217 PTFE Liners are known for providing the widest range of chemical compatibility and for being the most temperature tolerant of plastic closures. The color green easily identifies the PTFE liner system. F-217 foam-backed PTFE liners resist attack from virtually…
-
Screw cap, solid top
MilliporeSigmaGreen Thermoset Plastic Caps with F-217 PTFE Liners are known for providing the widest range of chemical compatibility and for being the most temperature tolerant of plastic closures. The color green easily identifies the PTFE liner system. F-217 foam-backed PTFE liners resist attack from virtually…
-
Vials, screw top
MilliporeSigmaApplication: Autoclavable, easy to maintain. A vial is used to store or as a closure type. Other Notes: 27269 --> material nos. 27269 (100pk) & 27270-U (1000pk).
-
Vials, crimp top
MilliporeSigmaThese vials are constructed of clear, borosilicate glass; closure not included.
-
Certified Vial Kit, Low Adsorption (LA)
MilliporeSigmaSupelco's new Low Adsorption (LA) vials are manufactured using a process that decreases the number of hydroxyl groups on the vial's glass surface, significantly reducing surface activity while improving analytical quantitation and minimizing pH shifts in the sample. This same process also removes…
-
Headspace vial, screw top, rounded bottom
MilliporeSigmaThese vials require a special cap with an 18 mm thread. The standard 18-400 threaded caps will not fit this vial. The part numbers for caps that are available for these vials are SU860101(with PTFE/silicone, 1.3 mm thick), SU860102 (with PTFE/butyl, 1.6 mm thick), and SU860103 (with PTFE/silicone,…
-
Insert for 2 mL standard opening vial
MilliporeSigmaVial inserts basically permit the use of smaller sample volumes with standard autosampler vials. Inserts are generally chosen based on the inner diameter of the vial neck. Standard opening vials (4.6 mm ID) require a 5 mm OD insert.
-
Vial crimp seals, BiMetal (magnetic)
MilliporeSigmaThe BiMetal caps are made of both tin and aluminum and are easier to crimp than tin 20mm seals. The sealing surface is aluminum and the inner diameter is made of tin to add the magnetic surface. These caps are available in a variety of colors. Other Notes: We recommend using the plier-type…
-
Vials
MilliporeSigmaVials (volume 2 mL, amber glass vial, thread 8-425) are suitable basically to inject samples from an autosampler. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials. Amber glass protects sensitive samples from exposure to UV…
-
Screw cap, phenolic
MilliporeSigmaScrew caps (black phenolic hole cap, for use with 7 mL vial with 15-425 thread) are available as hole caps for use with sealing septa. Caps are offered in phenolic resin. Phenolic hole caps can withstand a maximum temperature of 149C.
-
The package contains 10 PVDF double cones for capillary connection (o.d. 0.5 mm) with knurled nuts Ordering No. 1.15545 or 1.51216.
-
Liquid scintillation vials
MilliporeSigmaReliable Wheaton "180" brand low-potassium glass. White 22 mm caps have tops suitable for writing. Vials with caps attached are packed in individual cells in trays of 100.
-
Vials, screw top, clear glass
MilliporeSigmaVials are suitable basically to inject samples from an autosampler. They are varied in sizes, though 2 mL vials are more commonly used. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials. Application: Clear glass, screw top…
-
Certified Vial Kit, Low Adsorption (LA)
MilliporeSigmaSupelco's new Low Adsorption (LA) vials are manufactured using a process that decreases the number of hydroxyl groups on the vial's glass surface, significantly reducing surface activity while improving analytical quantitation and minimizing pH shifts in the sample. This same process also removes…
-
Wheaton sample vials with rubber lined caps
MilliporeSigmaCaps have white styrene-butadiene rubber liner and are packed in Lab-File® cases. Clear Wheaton-33, low extractable borosilicate glass or amber Wheaton-320 glass. Can be sterilized and stored at low temperatures. Legal Information: Lab File is a registered trademark of Wheaton Industries, Inc.