This Amicon Ultra 0.5 mL centrifugal filter enables the concentration of proteins with a membrane NMWL of 3 kDa. Amicon Ultra centrifugal filters are ideal for protein purification, protein concentration & desalting. The vertical design and available membrane surface area provide fast…

Millipore Swinnex™ Filter Holder, 13 mm. Use to ultraclean or sterilize small volumes of liquids dispensed by syringe Made of polypropylene with silicone gasket These filter holders accept 13mm membrane filters of your choice Autoclavable with filter in place for sterile…

Overview Fluoropore™ Membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support. (Catalogue numbers containing ""FHUP"" have no backing.) Fluoropore™ Membranes provide broad chemical compatibility,…

Advanced protection against airborne contaminants for storage tanks of Milli-Q® CLX 7000 series systems

STERIFLIP® FILTERS Compatible with 50 mL centrifuge tubes, Steriflip® filters eliminate the liquid transfer step by integrating directly into the sample tube. To filter, attach the unit to the 50 mL centrifuge tube containing your sample, flip, and apply vacuum. The filtrate…

STERILE MILLEX® SYRINGE FILTERS Applications include sterilizing cell culture reagents such as cell culture media, antibiotics, supplements, sera, viruses for infection, and other biological solutions Fast flow and low binding for cell culture media preparation with Millipore…

This centrifugal filter enables the concentration of proteins with a membrane NMWL of 10 kDa. Centricon centrifugal filters are ideal for concentrating & desalting proteins in sample volumes from 15 to 70mL. Concentrate 70 mL to 350 µL in just 25 minutes Device consists of:…

Provide both high sample recovery and fast sample processing This Amicon Ultra 15 mL centrifugal filter enables the concentration of proteins with a membrane NMWL of 100 kDa. Amicon Ultra centrifugal filters are ideal for protein purification, protein concentration & desalting. …

A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophilic PTFE membrane. Female Luer-Lok™ inlet and male Luer slip outlet Ethylene oxide sterilized Comes in a pack of 50

Overview Mitex™ PTFE Membrane is unaffected by almost all liquids, including organic solvents, concentrated acids and bases, propellants, and cryogenic fluids. Mitex™ membrane is unbacked, yet is easy to handle, combining the convenience of a backed membrane with the versatility…

Dispensing pressure vessel, 1 gallon Dispensing pressure vessels hold liquid for filtration through Millipore pressure-operated filter holders when connected to an external pressure source. Type 316 stainless-steel body and fittings; Viton gaskets and O-rings; molded neoprene rubber…

STERILE MILLEX® SYRINGE FILTERS Applications include sterilizing cell culture reagents such as cell culture media, antibiotics, supplements, sera, viruses for infection, and other biological solutions Fast flow and low binding for cell culture media preparation with Millipore…

By pressing the lever, the EZ-Pak dispenser delivers a single sterile membrane and automatically collects the protective packaging. No protective papers to separate manually from membrane, eliminating time and contamination risk from handling membranes and packaging Easy-load…

This 25 mm syringe filter with a Mixed Cellulose Esters membrane, for non-sterile filtration, has a 0.22 µm pore size used in Fine particle removal from aqueous solutions. Designed for fine particle removal from aqueous solutions Polyvinyl Chloride (PVC) housing Hydrophilic…

Provides fast sample processing, high sample recovery This Amicon Ultra 0.5 mL centrifugal filter enables the concentration of proteins with a membrane NMWL of 3 kDa. Amicon Ultra centrifugal filters are ideal for protein purification, protein concentration & desalting. The…

Millipak pump-driven filter units have a unique stacked-disk design to eliminate the particle-generating woven downstream support found in pleated cartridges. The units listed below have 6 mm (1/4") inlet and outlet hose barb connections. Units are supplied gamma sterilized and may be…

Steritop bottle top filter units provide a large filter area for rapid sterile filtration of aqueous fluids into narrow-mouth (33 mm) or wide-mouth (45 mm) bottles. A small tab inside the funnel secures an optional prefilter in-place during filtration. For added protection against contamination,…

Provides fast sample processing, high sample recovery This Amicon Ultra 15 mL centrifugal filter enables the concentration of proteins with a membrane NMWL of 50 kDa. Amicon Ultra centrifugal filters are ideal for protein purification, protein concentration & desalting. The…

With their vertical membrane design, Amicon Ultra 0.5 mL filters deliver great performance and lower spin times This Amicon Ultra 0.5 mL centrifugal filter enables the concentration of proteins with a membrane NMWL of 30 kDa. Amicon Ultra centrifugal filters are ideal for protein…

A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic Polyethersulfone (PES) membrane. Color Code: Green Connections, Inlet/Outlet: Female Luer-Lok/Male Luer slip Maximum Inlet Pressure, bar (psi): 10 (145) Sterilization: Gamma irradiation

This Amicon Ultra 0.5 mL centrifugal filter enables the concentration of proteins with a membrane NMWL of 10 kDa. Amicon Ultra centrifugal filters are ideal for protein purification, protein concentration & desalting. The vertical design and available membrane surface area provide fast…

With their vertical membrane design, Amicon Ultra 0.5 mL filters deliver great performance and lower spin times. This Amicon Ultra 0.5 mL centrifugal filter enables the concentration of proteins with a membrane NMWL of 50 kDa. Amicon Ultra centrifugal filters are ideal for protein…

Non-sterile Millex filter units offer unsurpassed quality, consistency, and reliability of results to accelerate the filtration process. Higher Operating Pressures and Faster Filtration The overmolded housing design provides a more robust filter, with a maximum housing pressure of 150 psig (10…

NONSTERILE MILLEX® SYRINGE FILTERS Applications include filtration-based sample preparation for dissolution testing, HPLC, UHPLC, LC-MS, ion chromatography (IC), and general particulate removal Hydrophilic PTFE Millex® filters are HPLC-certified for low extractables …

Biologically inert mixtures of cellulose acetate and cellulose nitrate have made MF-Millipore™ membrane filters one of the most widely used membranes in analytical and research applications. MF-Millipore™ filters without Triton® surfactant contain minimum amounts of wetting…

With their vertical membrane design, Amicon Ultra 0.5 mL filters deliver great performance and lower spin times This Amicon Ultra 0.5 mL centrifugal filter enables the concentration of proteins with a membrane NMWL of 10 kDa. Amicon Ultra centrifugal filters are ideal for protein…

NONSTERILE MILLEX® SYRINGE FILTERS Applications include filtration-based sample preparation for dissolution testing, HPLC, UHPLC, LC-MS, ion chromatography (IC), and general particulate removal Hydrophilic PTFE Millex® filters are HPLC-certified for low extractables -…

An essential component of high-quality separation and purification processes, non-sterile Millex syringe filters provide unsurpassed quality and consistency of results. This 4 mm syringe filter with a Hydrophilic PTFE membrane, for non-sterile filtration, has a 0.2 µm pore size used in…

For contamination analysis Transparent, disposable filter holders made from Tenite® plastic and pre-assembled with MF-Millipore filters (effective filtration area is 9 cm 2 ). A thick cellulose pad, 34 mm diameter, between the monitor sections seals the filter to distribute sample flow…

Provides fast sample processing, high sample recovery This Amicon Ultra 15 mL centrifugal filter enables the concentration of proteins with a membrane NMWL of 50 kDa. Amicon Ultra centrifugal filters are ideal for protein purification, protein concentration & desalting. The…