MBP, Clear
-
The 10 µL Biomek FX tip does not have the large air gap found when trying to pipet 10 µL or less with the 20 µL tip. Tips fit Beckman Biomek FX/NX, Multimek AP 96 and Biomek 3000. Genomic (wide bore) tips are also available.
-
0.5, 1.5 or 2.0 mL capacities Clear or amber Conical bottoms or freestanding Conical microcentrifuge tubes are made from a crystal clear resin that allows users to easily view samples. Polypropylene tubes are suitable for vapor phase liquid nitrogen storage, boiling and…
-
-
Graduated Safelock cap Sterile or non-sterile Three capacities Graduated microcentrifuge tubes employ the Safelock cap, an advanced locking system for safe centrifuging, boiling, freezing, incubation or storage of samples. The cap snaps close and the lock slides into place in…
-
Tecan TEMO tips have been certified for use on the Tecan TEMO workstation. The TEMO can be a stand-alone workstation (Tecan Aquarius) or used as a second head on the Tecan Genesis. Tips fit Tecan Temo and Tecan Aquarius.
-
Low retention tips are designed to reduce sample retention. Molded from virgin polypropylene, they do not use additives or coatings that may affect sample integrity. Low retention tips ensure reduced sample loss due to adhesion, allowing for more accurate dispensing and an increased level of…
-
Self-sealing filter tip protects pipettors from crossover contamination by not allowing liquids or aerosols to touch pipettors. Free of pyrogens, DNA, RNA, Rnase, and DNase. Presterilized. Individually wrapped.
-
Low retention tips are designed to reduce sample retention. Molded from virgin polypropylene, they do not use additives or coatings that may affect sample integrity. Low retention tips ensure reduced sample loss due to adhesion, allowing for more accurate dispensing and an increased level of…
-
Tips deliver highly accurate samples, seal well on the pipettor, and are easy to seat and eject.
-
Configure Thermo Scientific™ ART™ Nonfiltered Lift Off Racks and Bulk Pipette Tips with Rainin™ LiteTouch™ Pipettes.
-
MBP is the exclusive manufacturer of the 96-well format Caliper Automation Certified Pipet Tips. Tips are manufactured to exacting specifications. Racks provide the sturdiness required by automation equipment and tips are designed with exceptional straightness. All tips are certified DNase and…
-
Tips with ART® self-sealing barrier Clear Pre-sterilized 20 µL, 200 µL or 1000 µL liquid volumes Bi-fabricated wall of ART Ergonomic Tip creates a strong, effective seal while requiring significantly lower tip insertion and tip ejection force. Certified…
-
Frosted or non-frosted Graduated or non-graduated Three capacities: 0.6, 1.5 and 2.0 mL 0.6 mL microcentrifuge tubes are rated at 30,000 x G and are available graduated/frosted or non-graduated/non-frosted versions. 1.5 mL microcentrifuge tubes are rated at 26,000 x G and are available…
-
Reduces sample retention Sterile or non-sterile HydroLogix Tips are designed to reduce sample retention. Molded from virgin polypropylene, they don't use additives or coatings that may affect sample integrity. Low retention tips are for applications requiring high accuracy and reproducibility.…
-
Proprietary manufacturing technology enables creation of a more hydrophobic tip that allows users to pipet viscous samples, load dyes, surfactants and solvents with greater accuracy. Less sample is retained within the tip which decreases the amount of reagent loss while significantly increasing the…
-
Aerosol Resistant Tip Individually Wrapped Pre-Sterilized Certified Pure
-
Low retention tips are designed to reduce sample retention. Molded from virgin polypropylene, they do not use additives or coatings that may affect sample integrity. Low retention tips ensure reduced sample loss due to adhesion, allowing for more accurate dispensing and an increased level of…
-
ART self-sealing barriers trap contaminants, such as aerosols and liquids, keeping them out of pipettors and samples. This allows the user to conduct PCR† procedures and pipet radioactive or infectious samples. ART tips are presterilized and certified RNase-, DNase-, DNA-, and pyrogen-free. All…
-
-
Reduce contamination risk HydroLogix Tips (HLT) are designed to reduce sample retention. Molded from virgin polypropylene, they don?t use additives or coatings that may affect sample integrity. All sterile HLT tips are certified PURE. The testing protocols used in PURE certification are…
-
ART Reach Tips
MBPProtects against carryover contamination Extended tip length Aerosol Resistant Tips Four sizes Line of Reach ART (Aerosol Resistant Tips) pipettor tips provides an extra level of contamination control. ART tips have a self-sealing barrier that seals when exposed to aerosol and…
-
Tips deliver highly accurate samples, seal well on the pipettor, and are easy to seat and eject.
-
Microtiter Tubes
MBPMicrotiter tube systems are available pre-racked in an 8 x 12 format and can be autoclaved, sealed and frozen for storage. Tubes offer additional volume capacity for sample dilution and/or mixing prior to a range of procedures including HTLV-III testing, RIA, EIA, PCR, pharmaceutical quality…
-
Clear versions of Tecan tips are designed for researchers not using the conductive features of their platforms or requiring visual confirmation of their pipetting. These crystal clear tips are available in four sizes, sterile or non-sterile and with or without the ART barrier. Tips fit Tecan…
-
Racked Pre-sterilized Certified Pure
-
Wide bore Aerosol Resistant Tips are for working with genomic DNA, fragile cell lines and other viscous materials. ART tips have a self-sealing barrier that seals when exposed to aerosol and liquid contaminants, trapping them inside the barrier to provide protection against carryover contamination …
-
Low retention tips are designed to reduce sample retention. Molded from virgin polypropylene, they do not use additives or coatings that may affect sample integrity. Low retention tips ensure reduced sample loss due to adhesion, allowing for more accurate dispensing and an increased level of…
-
Advanced mold designs ensure a secure and airtight fit Dye and metal-free 100% premium grade virgin polypropylene Fine point design provides superior accuracy in drawing and dispensing samples. Bulk packaging is high quality and economical. Sturdy autoclavable rack can be used with…
-
HydroLogix Tips are designed to reduce sample retention. Molded from virgin polypropylene, they don’t use additives or coatings that may affect sample integrity. Wide bore tips are for working with genomic DNA, fragile cell lines and other viscous materials. With a distal end orifice…
-
-
HydroLogix tips are designed to reduce sample retention. Molded from virgin polypropylene, they don’t use additives or coatings that may affect sample integrity Low retention tips are for applications requiring high accuracy and reproducibility. The delivery of highly viscous liquids can be…
-
Enhance the performance of your Perkin-Elmer CCS workstation with BioRobotix tips. One group is designed for the PlateTrak, MiniTrak and Evolution P-3, these tips offer precision dispensing for multi-dispensing assays. Tips are available in 20, 50 and 235 µL volumes and in sterile,…