Access tips with one hand using Thermo Scientific™ ART™ Nonfiltered Hinged Rack Pipette Tips, which is designed for the way you work. No longer worry about your tips spilling on your bench or floor. Maximize your productivity and easily transition from hinged to lift-off in just three easy steps.…

Perform applications accurately and consistently without compromising protection with the Thermo Scientific™ ART™ Barrier Reload System, which provides an environmentally-responsible solution without compromising sterility. With offset wells that allow the tips to stack, this advanced system…

1-200ul, with Graduations at 10, 50, and 100 uL, Sterile, 96 Tip Hinged Rack, 4,800 per case, Color: Yellow Best Fit Gilson, Eppendorf, MLA, Nichiryo, Oxford

96 Wells 0.2 or 0.5 mL tubes Alphanumeric grid Specifically designed for PCR research, this 96-well rack holds either 96 0.2 mL PCR tubes or 96 0.5 mL style microcentrifuge or PCR tubes. Rack is reversible with one side suitable for larger tubes and the other side for smaller tubes.…

Tips with ART® self-sealing barrier Clear Pre-sterilized 20 µL, 200 µL or 1000 µL liquid volumes Bi-fabricated wall of ART Ergonomic Tip creates a strong, effective seal while requiring significantly lower tip insertion and tip ejection force. Certified…

The 10 µL Biomek FX tip does not have the large air gap found when trying to pipet 10 µL or less with the 20 µL tip. Tips fit Beckman Biomek FX/NX, Multimek AP 96 and Biomek 3000. Genomic (wide bore) tips are also available.

Configure Thermo Scientific™ ART™ Nonfiltered Lift Off Racks and Bulk Pipette Tips with Rainin™ LiteTouch™ Pipettes.

BioRobotix pipet tips help you get more out of your Tecan workstation. 20 µL and 50 µL liquid-sensing and clean Tecan tips increase the precision of low volume pipetting by minimizing dead air volume within the tip. All Tecan tips come in a hermetically sealed blister pack. These…

MBP is the exclusive manufacturer of the 96-well format Caliper Automation Certified Pipet Tips. Tips are manufactured to exacting specifications. Racks provide the sturdiness required by automation equipment and tips are designed with exceptional straightness. All tips are certified DNase and…

Tips ensure 100% protection against aerosol and liquid contamination. The SoftFit* tip design and sturdy rack are ideal for multichannel pipettors. Tips also fit most 200µL single-channel pipettors. The ART barrier traps contaminants, keeping them out of pipettors and samples. This also…

Pre-sterilized Racked Loading acrylamide or agarose gels with standard pipet tips can be time consuming. Specialty ARTS (Aerosol Resistant Tips) tips are self-sealing for gel loading and protect against carryover and cross-contamination.

Fits Perkin-Elmer/Packard Multiprobe II HT and Multiprobe II HT EX with Hanging Tips Multiprobe hanging tips are designed specifically for the Multiprobe II HT ensuring a superior fit. Offered in clear or liquid sensing versions.

Enhance the performance of your Perkin-Elmer CCS workstation with BioRobotix tips. One group is designed for the PlateTrak, MiniTrak and Evolution P-3, these tips offer precision dispensing for multi-dispensing assays. Tips are available in 20, 50 and 235 µL volumes and in sterile,…

The only alternative to Rainin LTS™ LiteTouch™ pipet tips PURE™ tips are pre-sterilized 20 µL, 200 µL or 1000 µL liquid volumes SoftFit L tips deliver highly accurate samples, seal well on the pipettor and are easy to seat and eject. Frosted shoulders with the MBP logo make…

HydroLogix Tips are designed to reduce sample retention. Molded from virgin polypropylene, they don’t use additives or coatings that may affect sample integrity. Wide bore tips are for working with genomic DNA, fragile cell lines and other viscous materials. With a distal end orifice…

Extended length prevents contamination Ergonomic design reduces hand fatigue Available with ART® barrier Fits most 1 mL pipettors 1000 Reach pipet tips have extended lengths to prevent contamination by keeping the pipettor shaft from entering the sample vessel. SoftFit design reduces hand…

Fits Beckman Biomek FX/NX With a Span-8 Head Liquid Sensing Span 8 for the Biomek FX Make the most of the FX’s liquid sensing capabilities with 20 and 250 µL tips

Wide bore Aerosol Resistant Tips are for working with genomic DNA, fragile cell lines and other viscous materials. ART tips have a self-sealing barrier that seals when exposed to aerosol and liquid contaminants, trapping them inside the barrier to provide protection against carryover contamination …

Racked Pre-sterilized

Low retention tips are designed to reduce sample retention. Molded from virgin polypropylene, they do not use additives or coatings that may affect sample integrity. Low retention tips ensure reduced sample loss due to adhesion, allowing for more accurate dispensing and an increased level of…

Low retention tips are designed to reduce sample retention. Molded from virgin polypropylene, they do not use additives or coatings that may affect sample integrity. Low retention tips ensure reduced sample loss due to adhesion, allowing for more accurate dispensing and an increased level of…

Reduces sample retention Sterile or non-sterile HydroLogix Tips are designed to reduce sample retention. Molded from virgin polypropylene, they don't use additives or coatings that may affect sample integrity. Low retention tips are for applications requiring high accuracy and reproducibility.…

Proprietary manufacturing technology enables creation of a more hydrophobic tip that allows users to pipet viscous samples, load dyes, surfactants and solvents with greater accuracy. Less sample is retained within the tip which decreases the amount of reagent loss while significantly increasing the…

Reversible With lids Designed to hold 0.2 mL 8-strip PCR tubes as well as 0.5, 1.5 or 2.5 mL reagent vials on one side, this reversible rack is for any researcher using strip tubes for PCR. When using only 0.5 mL tubes, flip the rack over for 96 alphanumeric labeled 0.5 mL wells for easy…

The ART 1000 with SoftFit shoulder provides a secure, universal fit. The ART 1000 is pre-sterilized and individually wrapped.

Protects against solvents Eliminates carryover contamination problems SolventSafe tips feature a new ART (Aerosol Resistant Tips) formula with Folded Activated Carbon to provide pipettor and sample protection against destructive carryover aerosols and vapors from volatile organic solvents…

ART self-sealing barriers trap contaminants, such as aerosols and liquids, keeping them out of pipettors and samples. This allows the user to conduct PCR† procedures and pipet radioactive or infectious samples. ART tips are presterilized and certified RNase-, DNase-, DNA-, and pyrogen-free. All…

The 4-Way Flipper benchtop storage system combines four racks in one. Designed to support a variety of tube sizes and styles, each rack can be rotated to any of the four sides to support different size centrifuge tubes. Their rugged polypropylene construction allows them to be autoclaved, placed in…

Guaranteed tip purity for increased precision and accuracy Rigid rack design Precision MBP molding Certified RNase, DNase, DNA pyrogen-free Fits a variety of automated workstations 384-well tip design ensures precise pipetting for volumes of 30 µL or less. Manufactured using non-wettable…

Fits 0.2 mL tubes on one side and 0.5 mL tubes on the other 96 wells per side in 8 x 12 format Every well numbered Custom molded Includes secure fitting lid

Tecan TEMO tips have been certified for use on the Tecan TEMO workstation. The TEMO can be a stand-alone workstation (Tecan Aquarius) or used as a second head on the Tecan Genesis. Tips fit Tecan Temo and Tecan Aquarius.

HydroLogix Tips are designed to reduce sample retention. Molded from virgin polypropylene, they don’t use additives or coatings that may affect sample integrity. Graduated versions are marked at 10, 50, 100 and 200 µL.