Self-sealing barrier tips block contamination Prevent contamination even under the most demanding conditions Hinged racks 96 tips/tray MBP's Aerosol Resistant Tip (ART®) is a self-sealing filter tip that protects pipettors from crossover contamination by not allowing…

Access tips with one hand using Thermo Scientific™ ART™ Nonfiltered Hinged Rack Pipette Tips, which is designed for the way you work. No longer worry about your tips spilling on your bench or floor. Maximize your productivity and easily transition from hinged to lift-off in just three easy steps.…

Perform applications accurately and consistently without compromising protection with the Thermo Scientific™ ART™ Barrier Reload System, which provides an environmentally-responsible solution without compromising sterility. With offset wells that allow the tips to stack, this advanced system…

The ART (Aerosol Resistant Tips) series features a self-sealing barrier designed to prevent contamination even under the most demanding conditions. These tips guarantee 100% protection against aerosol and liquid contamination.

Precise sample delivery Sterilized Racked Low retention ART (Aerosol Resistant Tips) tips are designed for applications requiring high accuracy and reproducibility. ART tips have a self-sealing barrier that seals when exposed to aerosol and liquid contaminants, trapping them inside…

Large orifice tip Purple rack Low Adhesion Tip orifice inside diameter is 0.059 inches (1.50 mm) Universal fit

Graduated Safelock cap Sterile or non-sterile Three capacities Graduated microcentrifuge tubes employ the Safelock cap, an advanced locking system for safe centrifuging, boiling, freezing, incubation or storage of samples. The cap snaps close and the lock slides into place in…

Reduce contamination risk HydroLogix Tips (HLT) are designed to reduce sample retention. Molded from virgin polypropylene, they don?t use additives or coatings that may affect sample integrity. All sterile HLT tips are certified PURE. The testing protocols used in PURE certification are…

HydroLogix Tips are designed to reduce sample retention. Molded from virgin polypropylene, they don’t use additives or coatings that may affect sample integrity. 1200 µL models fit Biohit Proline pipettors while 1250 and 1300 µL models fit Matrix pipettors.

0.5, 1.5 or 2.0 mL capacities Clear or amber Conical bottoms or freestanding Conical microcentrifuge tubes are made from a crystal clear resin that allows users to easily view samples. Polypropylene tubes are suitable for vapor phase liquid nitrogen storage, boiling and…

Tips deliver highly accurate samples, seal well on the pipettor, and are easy to seat and eject.

Color-coded Frosted caps Precise gap tolerances Electroporation cuvettes are color-coded and have frosted caps that make for trouble-free labeling and recognition. Cuvettes feature durable polycarbonate construction which can withstand pulses of very high voltages or field…

Protects against solvents Eliminates carryover contamination problems SolventSafe tips feature a new ART (Aerosol Resistant Tips) formula with Folded Activated Carbon to provide pipettor and sample protection against destructive carryover aerosols and vapors from volatile organic solvents…

Advanced mold designs ensure a secure and airtight fit Dye and metal-free 100% premium grade virgin polypropylene Fine point design provides superior accuracy in drawing and dispensing samples. Bulk packaging is high quality and economical. Sturdy autoclavable rack can be used with…

Low retention tips are designed to reduce sample retention. Molded from virgin polypropylene, they do not use additives or coatings that may affect sample integrity. Low retention tips ensure reduced sample loss due to adhesion, allowing for more accurate dispensing and an increased level of…

Increase pipetting performance with Thermo Scientific™ Automation Tips for the Eppendorf® epMotion® Automated Pipetting System, available in non-sterile, sterile and sterile filtered. Each pipet tip undergoes a rigorous 15-point quality control program to ensure consistency, thus…

The standard for cryogenic storage, this 81-well rack works with all 0.5, 1.5 and 2.0 mL cryovials. The 9 x 9 matrix rack is designed to replace 5 1/4” x 5 1/4” cardboard freezer storage boxes. The storage rack holds up to 81 tubes and comes complete with a clear polypropylene lid and…

ART self-sealing barriers trap contaminants, such as aerosols and liquids, keeping them out of pipettors and samples. This allows the user to conduct PCR† procedures and pipet radioactive or infectious samples. ART tips are presterilized and certified RNase-, DNase-, DNA-, and pyrogen-free. All…

Tips ensure 100% protection against aerosol and liquid contamination. The SoftFit* tip design and sturdy rack are ideal for multichannel pipettors. Tips also fit most 200µL single-channel pipettors. The ART barrier traps contaminants, keeping them out of pipettors and samples. This also…

Racked Pre-sterilized

Guaranteed tip purity for increased precision and accuracy Rigid rack design Precision MBP molding Certified RNase, DNase, DNA pyrogen-free Fits a variety of automated workstations 384-well tip design ensures precise pipetting for volumes of 30 µL or less. Manufactured using non-wettable…

Wide bore Aerosol Resistant Tips are for working with genomic DNA, fragile cell lines and other viscous materials. ART tips have a self-sealing barrier that seals when exposed to aerosol and liquid contaminants, trapping them inside the barrier to provide protection against carryover contamination …

ART Aerosol Containment Tips Eliminates cross-contamination Designed for use in genetic studies, DNA work, tissue culture and radioactive sampling Sterilized by electron beam radiation Precisely molded ART (aerosol resistant tips) have a hydrophobic, self-sealing barrier that reduces the…

The 4-Way Flipper benchtop storage system combines four racks in one. Designed to support a variety of tube sizes and styles, each rack can be rotated to any of the four sides to support different size centrifuge tubes. Their rugged polypropylene construction allows them to be autoclaved, placed in…

Fits 0.2 mL tubes on one side and 0.5 mL tubes on the other 96 wells per side in 8 x 12 format Every well numbered Custom molded Includes secure fitting lid

96 Wells 0.2 or 0.5 mL tubes Alphanumeric grid Specifically designed for PCR research, this 96-well rack holds either 96 0.2 mL PCR tubes or 96 0.5 mL style microcentrifuge or PCR tubes. Rack is reversible with one side suitable for larger tubes and the other side for smaller tubes.…

Low retention tips are designed to reduce sample retention. Molded from virgin polypropylene, they do not use additives or coatings that may affect sample integrity. Low retention tips ensure reduced sample loss due to adhesion, allowing for more accurate dispensing and an increased level of…

Reduces sample retention Sterile or non-sterile HydroLogix Tips are designed to reduce sample retention. Molded from virgin polypropylene, they don't use additives or coatings that may affect sample integrity. Low retention tips are for applications requiring high accuracy and reproducibility.…

Tips with ART® self-sealing barrier Clear Pre-sterilized 20 µL, 200 µL or 1000 µL liquid volumes Bi-fabricated wall of ART Ergonomic Tip creates a strong, effective seal while requiring significantly lower tip insertion and tip ejection force. Certified…

Reload inserts are color-coded by size. 2 Hinged Racks per Pack