labForce® (powered by Thomas Scientific), Instruments
-
Thomas Specific Gravity Plain Form Hydrometer
labForce® (powered by Thomas Scientific)Liquids heavier than water Specific gravity plain form hydrometers cover a variety of ranges and are for liquids heavier than water. Plain form hydrometers measure 165mm (6.5”) length, have 0.005 divisions and temperature of standardization is 60°F/60°F. 1234K71 has a…
-
RS-232 DB9-F to USB-A Interface Cable
labForce® (powered by Thomas Scientific)The interface cable allows for easy connection to a computer to stream data from Thomas Scientific Balances into data colleciton software. This cable is compatible with the following balance series: TS-T Series TS-L Series TS-P Series TS-PH Series TS-M Series
-
labForce® Clip-It Timer
labForce® (powered by Thomas Scientific)Large, clear LCD Quartz crystal accuracy 0.01% Easy-to-use three button operation Rugged chemical-resistant ABS plastic case Clip-it Timer counts down, alarms, and is a stopwatch. This handy timer is designed to clip onto your lab coat, belt, notebook, clipboard, or anywhere.…
-
Thomas Traceable Analog Radio Atomic Wall Clock
labForce® (powered by Thomas Scientific)Accurate to 1/10,000 of a second Automatically adjusts for daylight savings time Large digits are easy to read, even from far away Clock receives a controlling radio signal from NIST's atomic clock in Colorado to maintain accuracy and automatically adjust for daylight savings time…
-
Traceable® PH/ORP Meter
labForce® (powered by Thomas Scientific)Compact instrument fits in the palm of your hand Accuracy: ±0.02 pH 25 point memory storage with time/date stamp Waterproof (IP67) Triple Display shows pH or ORP measurement, temperature and time\date Ideal for wastewater, water quality and environmental applications …
-
DURAC Specific Gravity / Relative Density (g/cm3) Plain Form Hydrometers;…
labForce® (powered by Thomas Scientific)These plain form hydrometers are available in a variety of models measuring specific gravity / relative density (g/cm 3 ) of liquids lighter and heavier than water in various ranges from 0.690 to 2.000. Commonly used in industries such as food and beverage, chemical, pharmacology,…
-
300 Memory All Function Stopwatch
labForce® (powered by Thomas Scientific)Detachable clip Accuracy: 0.001% Resolution: 0.01 second Timing capacity: 9 hours Timing functions include single-action, time in/out, continuous timing, cumulative split, interval split, 300 memories and repetitive programmable. Stopwatch is 3” x 2 1/2” x 7/8” and weighs 2.5…
-
ISE-05 Potassium Ion-Selective Electrode
labForce® (powered by Thomas Scientific)The labForce® ISE-05 Potassium Ion-Selective Electrode (ISE) is a general purpose, laboratory or field electrode offering affordable, low maintenance Potassium analysis performance for many water applications such as wastewater, agriculture applications and food/beverage. Specifications: …
-
Traceable® Infrared Thermometer Gun
labForce® (powered by Thomas Scientific)Laser-beam sighting Fast readings Range: -76 to 932°F and -60 to 500°C Resolution: 0.1° Accuracy: ±2°C or 2% of reading, whichever is greater Emissivity: fixed at 0.95 Field view: 11:1 Display type: 1/4" digits, LCD Small, lightweight…
-
Alarm Timer Stopwatch
labForce® (powered by Thomas Scientific)Numbered keys for easy countdown timer setting Vivid LCD digits readable from 8 feet NIST Traceable® Certificate supplied Accurate to 0.01% The alarm timer stopwatch counts down with an alarm and counts up with a time-out feature. It can be programmed to count down from 99 minutes, 99 seconds…
-
PH200 Portable pH Meters
labForce® (powered by Thomas Scientific)The labForce® TS-PH200 Portable pH Meter combines advanced digital processing technology and software design, specially designed for all types of professional pH measurements. The meter has a ±0.01 pH accuracy in a range of -2.00-19.99 pH., with 0-100°C Automatic Temperature Compensation…
-
Lab Top Timer
labForce® (powered by Thomas Scientific)Ideal for bench use LCD designed for viewing at any angle NIST Traceable® certificate supplied Easy to operate Extra-large keys Accurate to 0.01% Timer counts down from 24 hours to 1 second in second increments. Special memory allows programming an instant replay repeat time, which appears…
-
Traceable® Memory/Waterproof Thermometer
labForce® (powered by Thomas Scientific)Temperature range is -58° to 572°F and -50° to 300°C Resolution is 0.1° from -20° to 200° Accuracy is 1°C between -20° to 100°C Minimum/maximum memory/alarm/hold Size is 6 5/8” x 2 7/8” x 1” with probe measuring 1/4”…
-
Traceable® Memory-Card Humidity/Temperature/Dew Point
labForce® (powered by Thomas Scientific)Traceable ® Memory-Card Humidity/Temperature/Dew Point Memory card captures readings from once a minute to once every 12 hours for recording continuously for years Traceable® Memory-Card Humidity/Temperature/Dew Point is a stand-alone unit with data logging capabilities. It records…
-
Thomas Traceable® Digital Humidity/Temperature Meter
labForce® (powered by Thomas Scientific)Relative humidity range is 25 to 95% Resolution is 1% RH Accuracy is ±2% RH mid-range to ±4% elsewhere Temperature range is 32 to 122°F and 0 to 50°C Resolution is 1° Accuracy is ±1°C Use unit with bench stand or mount on wall. Meter…
-
Three Button Stopwatch
labForce® (powered by Thomas Scientific)Lightweight and disposable Sound confirmation every time a button is pressed NIST Traceable® Certificate supplied Accurate to 0.1% Ideal for easy-duty, occasional-use needs where high precision is not a requirement. Can be worn around the neck with the (included) 38” lanyard. Times to 24 hours…
-
TS-L.N Series Standard Laboratory Balances with NTEP Certification
labForce® (powered by Thomas Scientific)Standard weighing with NTEP Certified Balance Legal for Trade All TS-L.N Series balances come with NTEP certificates. Precise Measurement and Repeatability The automatic adjustment system of TS-L.N Series balances is a control-verifying tool enabling precise weighing…
-
PHE-11 Glass 3-in-1 pH/Temp Electrode for Low Ion-Concentration Samples
labForce® (powered by Thomas Scientific)Moveable Sleeve Junction - The PHE-11 pH Electrode/Probe is easy to clean, especially suitable for low ion concentration solutions. The infiltration rate of the electrolyte is determined by the tightness of the sleeve, which can be customized by users to ensure the best performance in every…
-
Bath Fluid
labForce® (powered by Thomas Scientific)Silicone bath fluid Superior heat transfer medium in melting point baths, etc. High thermal and chemical stability This clear, colorless, oily liquid has a nominal viscosity of 50 centistokes at 25°C, with a viscosity/ temperature coefficient of 0.59. The boiling point is over 360°C with a…
-
Thomas Traceable Long/Extra Long Stem Digital Thermometers
labForce® (powered by Thomas Scientific)Chemical resistant probe Safer than mercury thermometers Display type: Large, bright 0.25" Display, 3.5-digit LCD Resolution: 0.1°; 1° above 199.9° and below -19° Probe diameter: 0.14 in Battery: 1 1.5V battery Switchable thermometers fit into cuvettes,…
-
PHE-19 Glass Combination pH Electrode for Low Temperature Solutions
labForce® (powered by Thomas Scientific)The PHE-19 pH electrode uses a low-impedance glass membrane, especially suitable for low-temperature sample testing. The conical sensor tip is highly resistant to general impact, and has a faster response rate and better repeatability. Low-impedance glass membrane, specially designed for…
-
Thomas Traceable Scientific Thermistor Thermometer with Calibration
labForce® (powered by Thomas Scientific)For critical experimental and QC requirements Read temperatures 0.001° NIST traceable accuracy (±0.05°C) Temperature range: -58.000 to 302.000 °F and -50.000 to 150.000°C Min/Max function Digital thermometer is ideal for critical experimental…
-
Traceable® Digital Thermometer with Recorder Output
labForce® (powered by Thomas Scientific)Temperature range is -50° to 1999°F and -50° to 1300°C Resolution is 0.1° from -50 to 199.9° (1° outside this range) Accuracy is ±0.3% plus 1°C Thermometer comes supplied with a Type K probe. Features include minimum/maximum memory and Hold.…
-
Anti-Static Ionizer
labForce® (powered by Thomas Scientific)Anti-static ionizer used to remove overflow of plus/minus ions from the balance environment. The ionizer neutralizes the electrical charges in the air to aid in the balances performance of measurements when unwanted electral influences are present. Frame dimensions of 268 x 100 x 295mm.
-
Traceable® Remote Alarm Rh/Temperature Monitor
labForce® (powered by Thomas Scientific)Features include minimum/maximum memory and RH and temperature alarm. Unit measures 4 1/4” x 2 3/4” x 3/4” and weighs 4 ounces. Monitors are provided with an individually serial numbered Traceable® certificate from an ISO 17025 calibration laboratory accredited by A2LA.…
-
ATC-01 Temperature Electrode
labForce® (powered by Thomas Scientific)The labForce® ATC-01 Temperature Probe/Electrode is ideal for use along with pH or conductivity electrode for temperature compensation to achieve automatic temperature compensation. Technical Specifications Material: Stainless Steel Temperature Range: -10 to 110°C (14 to…
-
Traceable® Waterproof Thermometer F/C
labForce® (powered by Thomas Scientific)Water-resistant remote probe thermometer is perfect for wet areas—case is IP61 rated and shockproof, and probe is impervious to acid and solvents. Probe with 10-ft (3-m) flexible cord makes it easy to take temperature measurements in hard to reach areas. Supplied with suction cups, magnet,…
-
Conductivity Meter
labForce® (powered by Thomas Scientific)Traceable® Pens for Conductivity, Dissolved Solids, and Salinity provides for conductivity, conductivity/total dissolved solids and salinity. Meters fulfill requirements for CAP, ASTM, NCCLS, CLSI, ACS, CLIA, AOAC, EPA, APHA, AWWA, WEF, USGS, USP, ISO and Federal/State regulations. Waterproof…
-
ISE-03 Silver Ion-Selective Electrode
labForce® (powered by Thomas Scientific)The labForce® ISE-03 Silver Ion-Selective Electrode (ISE) is a general purpose, laboratory or field electrode offering affordable, low maintenance Silver analysis performance for many water applications. Specifications: Sensor Type: Solid State Range: 0.01-107,900 ppm Sample…
-
Traceable® Digital Anemometer / Thermometer
labForce® (powered by Thomas Scientific)Air velocity ranges resolution (see chart below) Accuracy is ±(2% + 1 digit) Temperature accuracy is ±1°C Data hold feature Wind vane is 2 3/4” in diameter, 2 1/2” long and has a cable length of 4 feet. Unit measures 6 1/4” x 3” x 1…
-
Thomas Brand Cyanide Ion Electrodes
labForce® (powered by Thomas Scientific)Solid State Technology Solid State electrodes have solid, homogeneous sensing elements. They are more rugged and easier to clean than glass or membrane sensors. Polishing strips for the solid state sensors are included with the electrode. Thomas also offers a half-cell version that…
-
CC-03 Glass Conductivity Electrode, K=1
labForce® (powered by Thomas Scientific)The labForce® CC-03 Conductivity Electrode (K=1.0) is designed for high-accuracy laboratory conductivity measurements. Its cavity structure and platinum chip sensor design enhance the accuracy and stability of conductivity measurement in the range of 0 to 200mS/cm. The glass body is resistant…