Precision Current Source/Measure Calibrator 0 to 24mA (-25 to 125%) readout 24V DC power source for 2-wire current loop Up to five user adjustable calibration presets Palm-sized double molded housing and large dot-matrix digital backlit LCD Standard banana I/O ports Large…

Extech’s SP505 measures solar power level from outdoor sunlight to determine the best location of solar panel and solar water heater installations. It is also used indoors by window manufacturers, automotive industry, and remodeling home owners to check the level of solar radiation…

9mm Camera diameter 38" (0.95m) semi-rigid gooseneck Compatible with BR100, BR200 and BR250 Borescopes

The CA3010 is a 3000A AC flex clamp-on adaptor for multimeters and clamp on meters with standard sized banana plugs. The CA3010 is a 10 inch flexible clamp capable of measuring AC Currents up to 3000A. Complete with built-in flex clamp cable, 6.6ft (2m) lead with banana plugs and two AAA…

The MA61 is an AC current clamp with NCV voltage detector and full overload protection. Manual ranging clamp meter with three Current ranges and AC/DC voltage to 600V. The 6000mA range allows for low current measurements that may be used in the automotive industry. Unique VFC (variable frequency…

The TG20 Wire Tracer Kit identifies wire pairs, check continuity and test telephone line polarity. Transmitter has output cables terminated in modular RJ11 phone connector. The non-contact amplifier probe audibly identifies the selected wire or cable so that you can easily trace from source to…

The PQ3450-12 is a 1200 Amp Data logging Power Analyzer (up to 30,000 sets of measurements). Large dot-matrix, sun-readable, numerical, backlit LCD with easy-to-use onscreen menu. Full system analysis with up to 35 parameters. Includes 1200 Amp Current Clamps. Adjustable Current Transformer CT (1…

The Extech 381676A is a Pen Styled Multimeter with a Built in NCV detector. The 381676A features nine functions including AC/DC voltage to 600V, AC/DC Current to 200mA, Resistance, as well as Logic, Diode and Continuity tests. This meter has an easy to use rotary dial with alligator clips for one…

200GOhm/1000V Insulation Tester/DMM with Datalogging Combines a 200GΩ/1000V high range Insulation Tester with a full-featured True RMS MultiMeter in a single, compact instrument. CAT IV safety rating ensures the highest level of protection. Features Test Voltages of…

The MN62-K is a True RMS Multimeter with AC Voltage Detector Kit. Compact True RMS multimeter includes a free Non-contact Voltage Detector (NCV)! Ideal for troubleshooting appliances, electrical wiring, automotive repair and electronic devices. CE, ETL and UL certified, CAT IV 600V rating. Complete…

The TL900 is Extech's UL approved test leads with Safe Sense technology that senses the presence of voltage even with a blown fuse for increased user safety. Standard shrouded banana-to-banana plug connectors fit most millimeter input jacks. Dual layer silicone construction with wear…

The Extech TL747 Electronic Sharp Test Probe Set is for use on high density components and boards and for piercing through insulation. It has a 0.35 inch long tip and a 0.08 inch diameter. This test probe set has an overall length of 4 inches. Set is rated at CAT III-1000V.

The Extech TL740 Industrial Plunger Style Test Clip Set includes a spring loaded clip with steel jaws. It has a jaw opening of 0.6 inches and an overall length of 6.1 inches. This test clip set is rated at 1000V, 10A and CAT III-1000V.

The CG104 is a pocket-sized coating thickness tester which offers quick one-handed operation and non-destructive measurements of the thickness of ferrous and non-ferrous substrates. Its unique reversible display allows you to take readings in challenging angles of area being measured, plus it has…

The ET25 is an AC/DC Neon Voltage Tester. Checks voltage from 90 to 300V AC/DC. Neon indicator glows if circuit is live. Featuring a pocket clip and insulated housing. UL Listed and a one year warranty.

Extech’s SD910 allows technicians to easily monitor and record DC mV values from 3 external sensors, transducers, and other sources using one meter. It also stores the time and date of when readings are taken. The logger features a large triple LCD display and records data on an SD card in an…

The HDV-PC is an HDV Video Patch Cable. Use with the Extech HDV600 series video scope inspection camera in order to connect your articulating wired handsets to the videoscope. Product comes with a 1 year warranty.

The HDV-WTX1L is a Wireless Handset and Articulating Probe with a Long Focus Range. Probe is one meter fully extended. The HDV-WTX1L features Wireless transmission to HDV600 Video Scope. The HDV-WTX2L is a Wireless Handset with Articulating Probe with a Long Focus Range and two meter…

The Extech TL708 Alligator Clip Set has toothed jaws for the solid gripping of fine wires. They are heavy duty alligator clips with a 1000V, 6A CAT IV-600V and CAT III-1000V safety rating. Each have a one inch jaw length and a 1.6 inch jaw opening. The overall length of these alligator clips is 4.2 inches.

The ET15 is a Receptacle tester. Tests for faulty wiring in 3-wire receptacles. Detects 5 wiring faults. Lights indicate circuit condition. For 3-prong plug outlets. Product comes with a one year warranty and is UL listed.

The ET20B is a voltage detector for hassle free voltage inspections. Measures voltage from 100 to 250V AC/DC. Product features a durable construction and a neon voltage indicator light which will alert you to the presence of live voltages.

The DV23 is a Non-Contact Voltage Detector. Quickly check for the presence of live wires before testing. Suitable for outlets or against wire insulation testing, this AC Voltage Detector/Flashlight for non-contact detection of AC Voltage measures from 50 to 1000V (50/60 Hz). Red LED indicator…

The Extech BT100 is a Battery Capacity Tester. Product can be used to test the condition of batteries quickly and easily. As an AC milliohm-meter, the tester measures DC voltage and AC resistance while the battery is in use, helping to save time on repetitive testing trials or large quantities of…

The MA440 is a 9 Function, 400A True RMS AC Clamp Meter and NCV detector. This clamp is a compact meter with a True RMS feature for accurate readings regardless of waveforms. 1.2" (30mm) jaw size fits conductors up to 500MCM. CAT III 600V safety rating. CE and ETL certified. Complete with test…

The Extech EMF510 measures energy from electromagnetic fields (EMF) and electrical signals and is sensitive to extremely low frequency levels (ELF). The built-in single-axis sensor is ideal for monitoring power lines, electrical appliances, fans and blowers, and electrical circuits in two ranges…

The MA260 is a True RMS 200A AC Open Jaw Clamp Meter. The MA260 has a built in NCV detector and can measure up to 200A in its 0.6 in. open jaw. True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms. Complete with test leads and two AAA batteries. UL listed with a CAT IV…

The MG320 combines a portable 20GΩ/1000V Insulation Tester with a True RMS Multimeter. Insulation tester includes PI/DAR modes, programmable timer, and a comparator for custom test configurations and quick results. Cat IV 600V Safety rating. Manually store/recall up to 99 readings. 5 Test…

The MA443 is a 10 Function, 400A True RMS AC Clamp Meter and NCV detector. This clamp is a compact meter with type K temperature measurement. True RMS feature for accurate readings regardless of waveforms. 1.2" (30mm) jaw size fits conductors up to 500MCM. CAT III 600V safety rating. CE and…

The CG206 is a Coating Thickness Tester. Dual technology provides automatic recognition for ferrous and non-ferrous substrates without having you guess the material. Allows for quick, one-handed operation, non- destructive measurement of the coating thickness on various surfaces. Is CE certified…

The MA140 is a Compact AC Clamp Meter with NCV Detector. This Clamp meter takes True RMS measurements for accurate readings of noisy, distorted or non-sinusoidal waveforms. The MA140 can measure up to 300A AC. Complete with carrying case and two LR44 batteries. UL listed with a CAT III 600V safety rating.

The CG304 Coating Thickness Tester offers a non-destructive way of measuring the thickness of ferrous and non-ferrous substrates with automatic recognition of the material being measured. Memory stores 2500 readings. The unique Bluetooth interface feature wirelessly transmits data to your PC for…

DAT12 enables users of specific Extech meters to store up to 15K readings (meter not included). Recorded readings can be transmitted to a remote smart device (must be used with a compatible meter and free ExView W-Series App).Provides Wireless Data Streaming from meter with real-time remote viewing…