Heavy wall construction designed for lyophilization and freeze-drying. Manufactured from Wheaton 33 low extractable clear borosilicate glass that conforms to ASTM Type I, Class A and USP Type I requirements. Vacule vials have controlled ID, for accurate stopper fit. Designed for…

Clear, non-graduated glass vials with crimp top finish Closures not included Heavy wall construction for variety of applications Conical interior bottom provides downward drainage Made from clear and amber borosilicate glass Available with solid and open top screw cap or serum finish …

Amber non-graduated glass vials with solid top black phenolic caps Teflon® faced 14B rubber liner Screw cap attached Heavy wall construction for variety of applications Conical interior bottom provides downward drainage Made from clear and amber borosilicate glass Available with solid and…

General purpose vials can be used for liquid scintillation counting, sample collection and storage applications. HDPE is a robust material providing a high degree of resistance to many organic solvents. The convenient 6ml volume is compatible with standard liquid scintillation counter systems and…

Feature convenient snap ring/crimp top 12 x 32 mm vial 1.8 mL capacity Type 1 borosilicate glass The E-Z Vial with snap ring/crimp top features a plastic snap closure that eliminates the need for crimping and decapping tools. Vial has an opening that is 40% larger than…

Available with caps attached or no caps Low profile for greater stability Available with rubber lined caps or Teflon faced rubber lined caps Cap material is black phenolic and cap and liners are autoclavable. This sample vial and closure combination provides an extremely inert and…

Made from borosilicate glass Screw caps available separately Case of 200

LVI Vials and 11 mm Aluminum Seals are available together in Convenience Packs of 100. The clear and amber vials with a sealed-in, limited volume 300 µL insert are made of Type I borosilicate glass and have a white ceramic “write-on" patch.

The Organic series consists of clear and amber glass vials with solid or open top closures.  The closed-top closures have Teflon® faced 14B white styrene-butadiene rubber liners and the open-top closures have a Teflon faced silicone septa assembled in the cap. The cap material is black…

These economically priced sample vials are conveniently packed in two shrink-wrapped packs of 100 vials. This packaging reduces contamination from corrugated material found in traditional packaging. The clear vials are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to…

Borosilicate glass vial with 300 µL glass limited volume insert Limited Volume Insert is fused to vial which prevents needle damage Writing patch on all vials

Clear Vial with solid-top black phenolic 14B rubber-lined caps attached The aqueous series consists of clear and amber glass vials with solid-top closures. Featured is the black phenolic cap with a 14B white rubber liner. Both cap and liner are autoclavable and have substantial resistance to…

For use with WHEATON crimp top headspace vials Seals are made from aluminum for easy crimping and decapping Seals are magnetic for use with magnetic transport autosamplers

Vial File® for Organic Samples with amber vials with open top black phenolic Teflon® faced silicone lined cap.

Type I, Class A borosilicate glass Accept larger 2D bar code Improved stability Patented Vial Design (US D554,763 S) E-Z Ex-Traction Vials from Wheaton Science Products combine the best attributes of high recovery vials with a patented (U.S. patent pending) bottom to provide the optimum…

Wheaton headspace vials accept 20 mm aluminum seals Rounded shoulders and bottoms, allowing for even heating and safer operation at higher pressures Manufactured from Type I borosilicate glass Top provides a tighter seal with your septa O.D. x Height: 23 x 75 mm Capacity: 20 mL

Borosilicate glass vial with 300uL glass limited volume insert Insert is fused to vial to prevent needle damage Writing patch on all vials Purchase vials and caps separately or together in convenience packs Use with WHEATON ABC Screw Caps

Converted from Type I borosilicate glass tubing, vials conform to the hydrolytic resistance requirements outlined in USP <660> and EP 3.2.1 Conforms to 8362-1 requirements Shrink-wrapped modules reduce particulate contamination Special design adds strength for freeze-drying…

Autoclavable Attached screw caps Rubber lined caps Clear sample vials have solid top black phenolic caps that are Teflon faced with 14B rubber liners. Cap material is black phenolic and cap and liners are autoclavable. This sample vial and closure combination provides an extremely…

2 mL size Small size reduces sample to surface contact Made from Wheaton 33 low extractable borosilicate glass Attached polypropylene screw cap with metal foil liner

Wheaton headspace vials accept 20 mm aluminum seals Rounded shoulders and bottoms, allowing for even heating and safer operation at higher pressures Manufactured from Type I borosilicate glass Top provides a tighter seal with your septa O.D. x Height: 22 x 38 mm Capacity: 6 mL

Choice of borosilicate glass or polypropylene Snap plug closure available in natural polypropylene Purchase vials and caps separately or together in convenience packs Polyethylene snap plug caps feature a starburst top for easier needle penetration

Polypropylene or glass Cap finish is 15 mm Shell vials are designed for use with autosamplers that require 15 x 45 mm vials. Vials are are available in clear glass or natural polypropylene. 1234Q06 has a limited volume of 3 mL with other vials having a capacity of 4 mL. Caps sold…

These economically priced sample vials are conveniently packed in two shrink-wrapped packs of 100 vials. This packaging reduces contamination from corrugated material found in traditional packaging. The clear vials are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to…

Economically priced Made from borosilicate glass Case of 200

Clear or amber Range of sizes Teflon-lined caps The organic series consists of clear and amber glass vials with solid or open top closures. The closed-top closures have Teflon® faced 14B white styrene-butadiene rubber liners and the open-top closures have a Teflon faced silicone…

Manufactured from clear and amber Type I borosilicate glass Designed primarily for use in the Waters WISP 48-position and other autosamplers Packaged in shrink-wrapped trays of 100 for convenience and cleanliness

Clear graduated glass vials with solid top black phenolic caps Teflon® faced 14B rubber liner Screw cap attached Heavy wall construction for variety of applications Conical interior bottom provides downward drainage Made from clear and amber borosilicate glass Available with solid and…

Vials with caps attached packaged in partitioned trays Made from borosilicate glass Case of 72

Manufactured from Type I borosilicate glass Screw thread finish eliminates the need for crimping tools Accept 18mm screw thread closures with septa For use with CTC Analytics Systems requiring magnetic closures Also compatible with modern Agilent, Perkin Elmer and Tekmar autosamplers that…