Corning, Glass, 10 mL
-
Disposable, sterile, PYREX® individually wrapped Calibrated "to deliver" Has negative graduations and fire-polished tips for burr-free, even flow rates Individually wrapped in Steri-View™ wrapping (one side paper, one side plastic) for easier identification and opening
-
Pipets are color-coded by size for easy identification and sorting. Colored graduations are enameled onto the glass. These “to deliver” pipets must be blown out to obtain total rated capacity. Reference: ASTM E-1044.
-
Calibrated "to deliver" Large tip opening to allow more rapid intake and delivery of suspensions and viscous materials Color-coded by size for easy identification and sorting Accu-Red graduations are permanently fused into the glass Two rings at the top indicate the pipet…
-
Volumetric flasks for microchemical work, sizes 1 through 5mL, are designed in accordance with the recommendations of the Committee of Microchemical Apparatus, Analytical Division of the A.C.S. Solid Standard Taper glass stopper and hexagonal base Calibrated to contain at 20°C, in…
-
Permanent graduation line Machine-blown bodies Heavy-beaded, heavy-tubing necks are tooled for polyethylene stopper Stopper is made with a closed bottom and is of linear, high-density polyethylene to conform to Standard Taper stopper dimensions
-
With spout and hexagonal base Supplied with shock absorbing bumper guards. Cylinders are calibrated “to deliver” in accordance with ASTM E-1272 and ASTM E-542 or “to contain”. The double scale, numbered up and down, is in durable white enamel.
-
Specially designed for use in low tissue culture hoods or other confined enclosures The 1, 5 and 10 mL sizes of these pipets are almost 3” shorter than comparable disposable serological pipets The 25 mL size is 5” shorter than most comparable reusable pipets All sizes have…
-
These PYREX VISTA Class A graduated cylinders are calibrated either “to contain” (TC) or “to deliver” (TD), and have blue enamel graduations. The cylinder capacity is in accordance with ASTM E-1272. The 10mL size has a funnel top.
-
Calibrated "to contain" at 20°C Accuracy tolerances approximately twice those specified for Class A
-
These PYREX® EZ Access™ wide mouth volumetric flasks are calibrated to Class A tolerances and are designed for microchemical work. The heavy duty, wide mouth facilitates filling and mixing. Supplied with interchangeable Standard Taper PYREX® ground glass stopper. The graduation line…
-
For use without filter paper Offered in nine sizes and three porosities Pore sizes 40 to 60 µm = C, 10 to 15 µm = M and 4 to 6 µm = F With square-cut, fire-polished rim These funnels are especially useful where filter paper would be attacked by the material…
-
Color-coded Calibrated “to deliver” Graduated PYREX pipets are designed for cotton plugging. The uniform top-end openings permit performing of plugs and allow precise control of liquid column. Color-coded by size for easy identification and sorting. Colored graduations in…
-
PYREX® VISTA volumetric flasks provide precise volume measurement. The necks are tooled for Standard Taper glass stoppers. The graduation line is sharp and permanent and large blue block letters make the inscription easy to read. The 1 mL and 2 mL sizes are test tube shaped. These Class A…
-
With barrel-shaped Standard Taper glass stopper Calibrated to contain at 20°C
-
These Class A PYREX® volumetric flasks have machine-blown bodies to which are sealed heavy-beaded, heavy-tubing necks, tooled for No. 9 PTFE color-coded keyhole stoppers. For replacement stoppers see No. 7630. The graduation line is sharp and permanent. Large white block letters make the…
-
PYREX VISTA Griffin Beakers with spout are manufactured to provide balance between thermal shock resistance and mechanical strength. For convenience, the 250 through 1000 mL beakers have a double graduated metric scale to indicate approximate content. All sizes have an extra large marking spot. The…
-
The strength of these flasks has been increased appreciably through machine-blown bodies. Sealed, heavy-beaded, heavy-tubing necks are tooled for snap-cap fit. Graduation line is sharp, permanent and large; white block letters make the inscription easy to read. 1 mL and 2 mL sizes are…
-
Sterile, disposable, cotton-plugged, individually wrapped, shorty, PYREX® glass Same pipets as 7536N10 series, but individually wrapped in Corning Steri-View™ pouch Color-coded
-
Disposable, Shorty, PYREX Glass Similar to 7536D49 series, but neither sterilized nor cotton- plugged Markings removed by dichromate cleaning solution
-
PYREX Stark-Dean
CorningPYREX®10 mL , Stark- Dean For use in the determination of water in petroleum products and bituminous materials Graduated in 1/10 mL divisions from 0 to 1 mL ; in 1/5 mL divisions from 1 to 10 mL With Standard Taper 24/40 joints; meets ASTM Standard E 123
-
Calibrated "to contain" Tolerances ±5% Inexpensive, designed for those institutions performing many laboratory procedures PYREX® glass has proven itself to be tough and reliable for over 75 years of demanding use in the laboratory environment. The PYREX® name…
-
These PYREX® Class A graduated cylinders are calibrated "to contain" (TC) in accordance with ASTM E-1272 and ASTM E-542. Each cylinder is individually serialized and supplied with a Corning Certificate of Identification and Capacity, traceable to NIST standards. Useful as a mixing…
-
These reusable PYREX® glass pipets are color-coded by size for easy identification and sorting. Colored graduations are enameled onto the glass. They are calibrated "to deliver" (TD) their total capacity without blow-out. Reference: ASTM E-1293.
-
Disposable, sterile, PYREX® canister pack Calibrated "to deliver" Packaged in a flip-top canister to keep the pipets racked Sealed in polyethylene bags for sterility
-
PYREX® Griffin Low-Form Beakers
CorningUniform wall thickness Large marking spot Spout Standard Griffin Beakers with spout, manufactured with uniform wall thickness, offer optimum balance between thermal shock resistance and mechanical strength. For convenience, the 250 through 4000 mL beakers have a double graduated…
-
Calibrated to Class A ASTM E-542 and E-288 Supplied with a certificate of identification Traceable to NIST standards The graduation line is sharp and permanent. Large white block letters make it easy to read. Supplied with a Standard Taper stopper.
-
These reusable PYREX® pipets are calibrated to Class A tolerances in accordance with ASTM E-542, and ASTM E-1293. Each pipet is individually serialized and supplied with a Certificate of Identification and Capacity, traceable to NIST standards. Calibrated "to deliver" (TD) their total…
-
Pyrex® sterile multi-pack Designed for the larger volume user, these pipets are calibrated "to deliver" and are packed to permit easy access to several pipets at a time without contaminating the entire case Multi-packed plastic bags to ensure sterility Cotton-plugged …
-
These 10-250mL PYREX® graduated cylinders are calibrated “to contain” (TC) and are useful as a mixing cylinder. Graduations are in durable white enamel. Each features a PYREX® No. 13 Standard Taper stopper. Approximate height does not include stopper. For replacement PYREX®…
-
PYREX Micro Volumetric Flasks
CorningMicrovolumetric Class A flasks are individually serialized and supplied with a Certificate of Identification and Capacity. Flasks are designed for microchemical work in accordance with the recommendations of the Committee of Microchemical Apparatus, Analytical Division of the A.C.S. To…
-
Distilling Traps
Corning• For determining the amount of dilution in engine crankcase oils when gasoline has been used as the fuel • Graduated from 0 to 5 mL in 1/10 mL divisions • With Standard Taper 24/40 inner joint at bottom • For ASTM Standard D 322; ANSI method Z11.29; API standard 524; and Federal Test Method…