bioWORLD, 100 g
-
Kinetin (6-Furfuryl-aminopurine)
bioWORLDSynonym: N 6 -Furfuryladenine Cytokinin growth regulator Plant tissue-culture tested Appearance: white crystaline powder Melting Point: 269-271°C Soluble in 1N NaOH Solubilize at 1 mg/mL in 0.1N KOH
-
Magnesium Sulfate, heptahydrate
bioWORLDA biological counterstain to fuchsin and safranin Synonym: N,N,N′,N′ -Tetramethyl-4,4′-diaminotriphenylcarbenium oxalate, Basic Green 4 High Purity Grade Em (618nm, H2O): >72,000 Zinc: None detected Appearance: Powder Melting Point:…
-
PIPES Sodium Salt
bioWORLDA "Good Buffer" because it has a pKa value near physiological pH, it is not absorbed through cell membranes, and it is essentially transparent to UV light. Used for culturing cells in vitro and other biological applications. Application: For Research and Laboratory use only
-
N-Octyl-Beta-d-glucopyranoside
bioWORLDAlso known as n-Octylglucoside, OG, Octyl Glucoside, Glucopyranoside. A non-ionic detergent used to solubilize membrane proteins. Reagent Grade Appearance: White crystalline powder IUPAC_Name: 2R,3S,4S,5R,6R)-2-(Hydroxymethyl)-6-octoxyoxane-3,4,5-triolyl)-6-octoxyoxane-3,4,5-triol …
-
Peptone Water, 100 g
bioWORLDUsed for the detection of indole and carbohydrate fermentation patterns. Dissolve 15 g in 1 litre of distilled water and adjust the pH to 7.2. Composition: Peptone, Sodium Chloride Appearance: Solid pH Value: 7.2 ± 0.2 @ 25°C
-
Also known as D-Pantothenic acid or Vitamin B Sensitivity: Hygroscopic Substance is listed in Toxic Substance Control Act (TSCA) inventory Appearance: Solid Melting Point: 138°C RTECS Number: RU4375000
-
Ampicillin, trihydrate
bioWORLDSynonyms: D-(−)-α-Aminobenzylpenicillin salt A β-lactam antibiotic with an amino group side chain attached to the penicillin structure, 6-amino-penicillanic acid. A semi-synthetic penicillin derivative that inhibits bacterial cell-wall synthesis (peptidoglycan cross-linking)…
-
-
D-Ribose
bioWORLDThe bioWORLD D-ribose is mainly used as a supplement to enhance immunity and reduce excessive fatigue. It is recommended to be taken after workout.
-
Yeast Nitrogen Base,w/o Amino Acids
bioWORLDFor classifying yeasts based on amino acid and carbohydrates requirements Requires addition of a carbon source Does not contain histidine, methionine, or trypophan pH: 5.2 - 5.6 Working Concentration: 6.7 g/L (single-strength) or 67 g/L (10X) Can be supplemented with choice…
-
Bacto Peptone (Powder)
bioWORLDUsed as an organic nitrogen source in microbiological media for culturing variety of bacteria and fungi Enzymatic digest of animal protein Working concentration: 50 mg/mL Dehydrated Appearance: faint yellow to yellow-brown powder Prepared Appearance: dark yellow solution …
-
Sequestrene™ 138, 6% Iron Chelate
bioWORLDSynonym: Fe-EDDHA High performance iron chelates for foliar and soil applications Replacement for FeNa-EDTA Plant tissue culture tested Soluble in water Iron is essential for the formation of chlorophyll, a vital component to ensure plant health. Since iron has low plant…
-
Imidazole
bioWORLDA reagent used in biological buffers and metal chelate chromatography protocols. Biotechnology Grade Melting Range: 88-92°C DNase, RNase Activity: None detected
-
Potassium iodide
bioWORLDA simple iodide salt utilized as a fluorescence quenching agent An inorganic compound used medicinally in tablets. A precursor to silver iodide in photography. A component in some disinfectants and hair treatment chemicals. Used as a nutritional supplement in animal feeds and…
-
Agarose 1, Biotech Grade
bioWORLDbioPlus Agarose I is formulated specifically for analysis of nucleic acids, using standard electrophoretic techniques. Biotechnology Grade Gel strength: >1200g/cm2 Gelling point: 33-39°C Melting point: 87-89YC Sulfate EEO(-mr) DNase, RNase, Protease activity: None detected …
-
Maleic acid hydrazide
bioWORLDSynonym: 1,2-Dihydro-3,6-pyridazinedione, 3,6-Dihydroxypyridazine, 3,6-Pyridazinediol Appearance: White cystals Density: 1,6 g/cm3 HS Code: 29339990 IUPAC_Name: 1,2-dihydropyridazine-3,6-dione Melting Point: 299-301°C RTECS Number: UR5950000
-
Yeast Extract
bioWORLDAqueous extract of autolysed brewer's yeast Has a high vitamin content, providing excellent growth factors for most microorganisms Is usually added to culture media to provide a source of vitamins at a concentration of 3-5 g/L After opening, tightly recap and place the container…
-
Ammonium Molybdate(VI),Tetrahydrate
bioWORLDCompound used in cryo-negative staining and is also used as an analgesic. Appearance: White crystalline powder Density: 2.50 g/cm3 at 25 ¡ãC HS Code: 28417000 Melting Point: 190ºC RTECS Number: QA5076000
-
A nondenaturing Zwitterionic detergent suitable for use as a solubilizing agent for membrane proteins due to the disruption of non-specific protein interactions. Ultra Pure Grade Conductivity (10%, Water): <=50umhos Residue on Ignition: <=0.1% Purity (TLC): One spot…
-
Amikacin disulfate salt
bioWORLDSynonyms:(S)-O-3-amino-3-deoxy-α-Dglucopyranosyl-(1→6)-O-[6-amino-6-deoxy-α-Dglucopyranosyl-(1→4)-N-(4-amino-2-hydroxy-1-oxobutyl)2-deoxy-D-streptamine disulfate; 1-N-[L(—)-4-amino-2-hydroxybutyryl]kanamycin A disulfate Amikacin prevents bacterial protein synthesis…
-
-
Nicotinic Acid
bioWORLDA major chemical component of coenzymes NAD + and NADP + Specifications: Also know as Niacin, Pyridine-3-carboxylic acid Substance is listed in Toxic Substance Control Act (TSCA) inventory Acidity: 2.201 Appearance: White crystals Boiling Point: >237°C…
-
Super Optimal Broth (SOB Medium)
bioWORLDUsed for cultivation of recombinant strains of E. Coli Is a nutritionally rich growth medium for use in the preparation and transformation of competent cells pH: 7.0 Working Concentration: 28 g/L Dehydrated Appearance: light beige, homogenous powder Prepared Appearance:…
-
Luria-Bertani (LB) Agar, Miller
bioWORLDFor propagation and maintenance of Escherichia coli Contains twenty times the sodium chloride level of Luria Agar Base, Miller and twice the level found in LB Agar, Lennox pH: 7.0 Working Concentration: 40 g/L Dehydrated Appearance: light tan, homogeneous powder Prepared Appearance: light…
-
Ficoll 400, 100 g
bioWORLDFor growth of established cells, primary cell cultures and cells with low plating efficiency. A neutral, highly branched, hydrophilic polymer of sucrose. Used as supplements in chemically defined media, often in conjunction with serum-derived growth factors. Ficoll™ is…
-
Metronidazole
bioWORLDDerivative of 5-Nitroimizadole with activity against anaerobic protozoa and anaerobic bacteria. An antibiotic affective against protozoa and anaerobic gram-positive and gram-negative bacteria Protect from light Possible risk of irreversible effects Possible carcinogenic effects …
-
Bovine Serum Albumin (BSA)
bioWORLDReagent grade, fatty acid free Moisture: < 1.0% Heavy metals: <0.5% Endotoxin: ≤0.1EU/mg pH (10% water): 6.5 - 7.5
-
EGTA (Ethyleneglycol bis (2-Aminoeth
bioWORLDA metal chelating agent specific for calcium ions. Commonly used in tissue culture media and biological buffers. Also known as Ethyleneglycol bis (2-Aminoethyl ether)-N,N,N',N' tetraacetic acide Ultra Pure Grade DNAse (exonuclease), NICKase (endonuclease), RNAse, and…
-
p-Chlorophenoxyacetic acid (CPA)
bioWORLDSynonym: 4-CPA Influence cell enlargement, root initiation and adventitious bud formation Appearance: off-white to tan crystals Melting Point: 157-159°C Soluble in etanol and KOH Harmful if swallowed
-
L-Asparagine
bioWORLDSynonym: ( S )-2-Aminosuccinic acid 4-amide, L-Aspartic acid 4-amide Anhydrous Appearance: White Crystalline Powder Density : 1.543 g/cm3 HS Code : 29241900 IUPAC_Name: Asparagine Melting Point: 235°C
-
8-Hydroxyquinoline
bioWORLDAn organic compound and also a derivative of the heterocycle quinoline by placement of an OH group on carbon number 8. The complexes as well as the heterocycle itself exhibit antiseptic, disinfectant, and pesticide properties. Its solution in alcohol is used as liquid bandages. It once was of…
-
Dextran sulfate
bioWORLDA glycosaminoglycan that acts as a precipitant for high density lipo- proteins (HDLs). Used in hybridization protocols where it effectively increases the probe concentration accelerating the rate of annealing. Ultra Pure Grade Moisture: <10.0% Heavy metals (as Pb): <0.005% …