Capsule wire, weights, and sinker baskets are used to retain a solid dosage form at the bottom of the vessel for testing when the dosage form is buoyant. Depending on your dosage form, a variety of options are available. This product is only available to U.S. Domestic Customers. For…

Solid phase microextraction (SPME) is a technique for extracting analytes from solid, liquid, or gaseous samples by adsorbing them onto the SPME fiber and then desorbing them into an inlet, either on a gas chromatograph (GC) or an HPLC system. SPME is amenable to automation using an autosampler or…

Nebulizers are a critical part of the Flame AA sample introduction system. Agilent nebulizers for PerkinElmer AA instruments are designed to support a variety of samples and provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences. Application: For…

Captiva syringe filters offer the industry's highest flow rates and loading capacities. Using Captiva syringe filters also significantly extends column lifetime. Choose from a variety of membrane types and pore sizes to prepare small-volume samples for High-Performance Liquid Chromatography (HPLC)…

Dissolution vessels are used to hold dissolution media during drug release. Agilent provides a variety of dissolution vessels for use with Agilent dissolution apparatus. Selected verified vessels are available containing a Certificate of Conformance (COC). Application: For VK7025/VK7030 This…

In paddle dissolution method, dissolution paddles are attached vertically at the end of a rotating shaft to release the active pharmaceutical ingredient from the dosage form inside the holding vessel. Agilent dissolution rotating paddles are compatible with both apparatus 2 and apparatus 5 methods.…

The Agilent Technologies carousel adaptor is suitable for use with PSD-96/97/100 model. Application: For PSD-96/97/100 This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies P3211 pH combination electrode comes with 30 mL refilling solution and delivers great and accurate results in chemical laboratories. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Captiva syringe filters offer the industry's highest flow rates and loading capacities. Using Captiva syringe filters also significantly extends column lifetime. Choose from a variety of membrane types and pore sizes to prepare small-volume samples for High-Performance Liquid Chromatography (HPLC)…

The corrosion-resistant VacElut cartridge manifolds allow simultaneous processing of multiple Bond Elut cartridges. The clear glass base allows observation of the entire sample collection process. Its compact, linear design requires little bench space. Application: For 13 x 75 mm Tubes, For Vac…

Agilent graphite platforms and tubes for PerkinElmer THGA and HGA graphite furnace AA systems are batch tested to ensure they our demanding performance requirements for contamination, sensitivity, precision, electrical resistance, and lifetime. Application: For HGA Tubes with internal grooves, for…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies 0.6 mm sampling probe is made from epoxy polymer for durability and the PTFE lining on the surface provides good corrosion resistance. Application: For AS-90/90A/90 Plus/91/93 Plus Autosamplers. Suitable for InOrganic Acids & Most Organic Solvents, Except NMP This…

Captiva syringe filters offer the industry's highest flow rates and loading capacities. Using Captiva syringe filters also significantly extends column lifetime. Choose from a variety of membrane types and pore sizes to prepare small-volume samples for High-Performance Liquid Chromatography (HPLC)…

A number of different autosamplers have been used with Agilent AA, ICP-OES, MP-AES and ICP-MS instruments, depending on the specific model. This includes the Agilent SPS 4 used with current instruments, and the SPS 3 or ASX 500 Series used with earlier model instruments. Each model autosampler is…

In paddle dissolution method, dissolution paddles are attached vertically at the end of a rotating shaft to release the active pharmaceutical ingredient from the dosage form inside the holding vessel. Agilent dissolution rotating paddles are compatible with both apparatus 2 and apparatus 5 methods.…

Bond Elut OMIX pipette tips reliably purify and enrich femtomole and picomole levels of peptides and proteins prior to MALDI-TOF or LC/MS/MS. This unique monolithic sorbent consistently delivers uniform flow and strong analyte-to-surface interactions. Bond Elut OMIX tips bind more peptides to…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies needle tip is the most commonly used item that is used extensively in chemical laboratories, research facilities, manufacturing industries and pharmaceutical factories. This product is only available to U.S. Domestic Customers. For research use only, not to be used…

Capsule wire, weights, and sinker baskets are used to retain a solid dosage form at the bottom of the vessel for testing when the dosage form is buoyant. Depending on your dosage form, a variety of options are available. This product is only available to U.S. Domestic Customers. For…

Agilent top-quality ICP-OES peristaltic pump tubing allows you to find the appropriate product to handle any matrix. Agilent has tubing in the diameters and material required for your application: PVC, Solvaflex, FPM, or Marprene. Standard PVC works for all aqueous with medium concentrated acids or…

The corrosion-resistant VacElut cartridge manifolds allow simultaneous processing of multiple Bond Elut cartridges. The clear glass base allows observation of the entire sample collection process. Its compact, linear design requires little bench space. Application: For 13 x 100 mm Tubes, For Vac…

The Agilent reciprocating holder apparatus 7 is ideal for automatic dissolution testing of dosage forms that require a change of media, a smaller volume, or more vigorous agitation. The Agilent 400-DS dissolution apparatus 7 enables of small-volume drug-release testing of medical devices such as…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies apparatus 3/7 inline filter housing is suitable for use with full flow filters in chromatography or spectrometry system models. Application: For Use With Full Flow Filters This product is only available to U.S. Domestic Customers. For research use only, not to be…

The Agilent flame AA spray chamber has an adjustable glass bead positioned in front of the nebulizer venturi, which breaks up the aerosol droplets and provides the operator with control over the aerosol concentration. Removable twin-head mixing paddles twice reverse the direction of aerosol…

In paddle dissolution method, dissolution paddles are attached vertically at the end of a rotating shaft to release the active pharmaceutical ingredient from the dosage form inside the holding vessel. Agilent dissolution rotating paddles are compatible with both apparatus 2 and apparatus 5 methods.…