The Agilent Technologies sparge probe replacement kit is suitable for use with chromatography system models of serial number above 13160. Application: For S/N Above 13160 This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Gas Chromatography (GC) columns are at the heart of the gas chromatograph and responsible for the separation process. GC is one of the most important and critical tools in analytical chemistry, because of its effectiveness, sensitivity and ease-of-use. GC columns contain a stationary phase,…

Agilent Polaris HPLC columns offer many polar phase chemistries designed separate mixtures of polar and nonpolar analytes reliably and with excellent peak shapes. The polar-embedded C8 and C18 bonded phases are compatible with 100% water, and offer alternative selectivities while still complying…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Simulated distillation is the preferred method for characterizing boiling point distributions of petroleumfractions because it requires less labor than physical distillation. Simulated distillation determinesquantitative mass yield (% off) based on the boiling points for the components in…

J&W Packed Gas Chromatography (GC) Columns are designed and manufactured to offer excellent and reproducible performance for all sample types associated with packed column separations, most important in the hydrocarbon processing industry. The efficient and rigorous packing technology used in J&W…

Agilent J&W DB-17 is a (50%-phenyl)-methylpolysiloxane column of mid polarity. Equivalent to USP phase G3, it is excellent for confirmation analysis. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Analyte: 2-Chlorobiphenyl (BZ 1), CAS Number: 2051-60-7; Analyte: 2,3-Dichlorobiphenyl (BZ 5), CAS Number: 16605-91-7; Analyte: 2,4,5-Trichlorobiphenyl (BZ 29), CAS Number: 15862-07-4; Analyte: 2,2',4,4'-Tetrachlorobiphenyl (BZ 47), CAS Number: 2437-79-8; Analyte: 2,2',4,4',5,6'-Hexachlorobiphenyl…

J&W DB-1701 is a low/mid-polarity (14% cyanopropyl-phenyl)-methylpolysiloxane column. This gas chromatography (GC) column is ideal for the analysis of pesticides, herbicides, trimethylsilyl (TMS) derivatives of sugars and related substances, and aroclors. The column is bonded, crosslinked, and…

J&W Packed Gas Chromatography (GC) Columns are designed and manufactured to offer excellent and reproducible performance for all sample types associated with packed column separations, most important in the hydrocarbon processing industry. The efficient and rigorous packing technology used in J&W…

Analyte: 2,2',3,3',4,5,6-Heptachlorobiphenyl (BZ 173), CAS Number: 68194-16-1.

Polymethylmethacrylate (PMMA) standards are extremely versatile as they can be used for organic GPC with a wide range of medium polarity eluents, such as tetrahydrofuran, toluene, methyl ethyl ketone, and ethyl acetate. They also work well with more polar organic eluents, for example…

The Agilent Pursuit family of HPLC columns offers reliable performance in various common particle sizes and phase chemistries, including USP L1, USP L7, and USP L11. Pursuit columns are available in many dimensions, including preparative HPLC columns. In addition, both traditional (Pursuit) and…

Agilent J&W CP-Sil 8 CB is a general-purpose phase that incorporates 5% phenyl groups in the dimethylpolysiloxane polymer, giving it slightly higher polarity than CP-Sil 5 CB. This delivers better selectivity for aromatic compounds and makes it the best choice for method development. Equivalent to…

Agilent J&W PoraPLOT U provides symmetrical peaks for polar volatiles. Water has no effect on retention times and elutes as a sharp and quantifiable peak. PoraPLOT U is the most polar porous polymer PLOT column and is designed for halogenated compounds, hydrocarbons C1-C6, ketones, and solvents. …

PLRP-S for Biomolecules products are available in a range of pore sizes and particle sizes, all with identical chemistry and fundamental adsorptive characteristics. The particles are inherently hydrophobic so there is no bonded phase, alkyl ligand required for reversed-phase separations. This gives…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Analyte: Chlorpyriphos-methyl, CAS Number: 5598-13-0.

Analyte: 1,2-Dichlorobenzene-d4, CAS Number: 2199-69-1; Analyte: 4-Bromofluorobenzene, CAS Number: 460-00-4; Analyte: Fluorobenzene, CAS Number: 462-06-6 ; . EPA, Method: 524.2.

The Agilent Gas Clean Purification system provides a way to purify gases entering the GC column, which helps to reduce the risk of column damage, sensitivity loss, and instrument downtime. Inserting a GC gas filter in the gas line immediately before the instrument inlet greatly reduces the level of…

Agilent J&W CP-Wax 57 CB for Glycols and Alcohols is optimized for the analysis of glycols, diols, and alcohols. It has a unique, high-polarity wax phase that produces symmetrical peaks. The crosslinked and bonded phase delivers robustness and enhanced column lifetime. This product is only…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Endoglycosidases (formerly ProZyme) release oligosaccharides from glycoproteins and some other substrates. These enzymes are useful for deglycosylating glycoproteins prior to analysis, or for releasing N-glycans for labeling and analysis. Useful in N-glycan analysis, Agilent offers PNGase…

Agilent J&W CP-Wax 52 CB is a high-polarity polyethylene glycol (PEG) phase with a wider temperature range than nonbonded PEG columns, due to extensive crosslinking. This column delivers higher resolution of low boiling point analytes, with guaranteed reproducibility and excellent temperature…

The Agilent Technologies thallium organometallic standard with concentration levels of 1000 ug/g comprises of top quality metallo-organic mixes that delivers accurate results while tracing metal concentrations. This standard can be used on a wide variety of sample viscosity or oil composition and…

Analyte: Benthiavalicarb-isopropyl, CAS Number: 177406-68-7.

InfinityLab Poroshell 120 HILIC columns for hydrophilic interaction liquid chromatography (HILIC) are designed for the retention and high-resolution separation of small polar analytes. The superficially porous character of the particles decreases equilibration times to improve throughput for both…

Agilent J&W CP-Sil 8 CB is a general-purpose phase that incorporates 5% phenyl groups in the dimethylpolysiloxane polymer, giving it slightly higher polarity than CP-Sil 5 CB. This delivers better selectivity for aromatic compounds and makes it the best choice for method development. Equivalent to…

The Agilent 0.8 mm ID ferrule is compatible GC systems with Low thermal mass column module. It is ideal for LTM system and operates at a maximum temperature of 350 degree C. Application: For LTM System This product is only available to U.S. Domestic Customers. For research use only, not…

Agilent Blood Alcohol Checkout Mix and ethanol calibration standards are Certified Reference Materials (CRM) manufactured in an ISO Guide 34 facility and certified in an ISO/IEC 17025 testing laboratory. These CRMs include a Certificate of Analysis (CoA) confirming the ISO conformity, actual…

Total organic carbon (TOC) Standard

PLOT columns are ideal for separating compounds that are gases at room temperature. The Agilent J&W Alumina and Q PLOT Intuvo GC Columns are recommended for the analysis of fixed gases, low moelcular weight hydrocarbon isomers, and volatile solvents. This product is only available to U.S.…