The enhanced sensitivity of graphite furnace AAS relies on use of an electrically heated graphite furnace tube in the workhead. Agilent graphite AAS tubes are machined from spectroscopically pure graphite coated with a dense, hard layer of pyrolytic graphite to improve sensitivity & lifetime. These…

Sampling and manifold replacement tubing and tubing kits are available to connect an Agilent dissolution tester to a sampling instrument such as the 850-DS dissolution sampling station. These tubings should be replaced on a regular basis. This product is only available to U.S. Domestic Customers.…

The Sample Introduction Pump System (SIPS) is an innovative sample introduction and dilution system for flame AA. SIPS eliminates the task of manual preparation of multiple calibration standards, providing fast, accurate online dilution of over-range samples. Application: For SIPS 10/20, to Seal…

Agilent burner system components for PerkinElmer PinAAcle/Aanalyst AA instruments are designed to provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences. Application: For Pinaacle Series This product is only available to U.S. Domestic Customers. …

Captiva filtration plates and cartridges completely remove precipitated proteins and strongly protect against HPLC column clogging. Captiva 96-well filter plates, available in 0.2 and 0.45 µm pore sizes, are ideal for preparing precipitated protein samples for LC/MS. Captiva 10 and 20 µm glass…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies adapter is made from strong and sturdy metal that offers good corrosion resistance thus enhancing the durability. This fitting provides a secure connection forming a leak-proof seal. This product is only available to U.S. Domestic Customers. For research use only,…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent provides disintegration fluted discs for the 100 automated disintegration apparatus. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Nebulizers are a critical part of the Flame AA sample introduction system. Agilent nebulizers for PerkinElmer AA instruments are designed to support a variety of samples and provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences. Application: For…

The Agilent Technologies mixing manifold consists of two inlet and one outlet connection and ensures a smooth liquid flow. Application: For FIMS-100, FIMS-400, FIAS-100, FIAS-400 This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies reservoir LRC with 2 frits offers a capacity of 1 cc. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies vessel conversion kit is useful for the analysis, diagnostics, calibration and monitoring of various chemical samples in laboratories and research facilities. This product is only available to U.S. Domestic Customers. For research use only, not to be used in…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent nebulizer used in the Mark 7 atomization system is easily adjustable by the user, so performance can be optimized with any sample type. The nebulizer is integrated into the spray chamber assembly and comprises easily interchanged capillary assemblies for low cost maintenance. All…

Each model autosampler is designed to automate the presentation of liquid samples, drawn from tubes held in racks loaded on the rack location mat, to the instrument for analysis. Each autosampler can accommodate a variety of fixtures, including standards and sample racks, probes and other…

Solid phase microextraction (SPME) is a technique for extracting analytes from solid, liquid, or gaseous samples by adsorbing them onto the SPME fiber and then desorbing them into an inlet, either on a gas chromatograph (GC) or an HPLC system. SPME is amenable to automation using an autosampler or…

Several reciprocating vessel screens are available for the Agilent BIO-DIS reciprocating cylinder apparatus, which is ideal for automatic dissolution testing of dosage forms that require different types of media. This product is only available to U.S. Domestic Customers. For research use…

Agilent Full Flow Filters are made of either ultrahigh molecular weight polyethylene (UHMWPE) or the polyvinylidene fluoride (PVDF). These dissolution cannula filters are relatively inert and can be used for different sample matrices. PVDF cannula filters are available in those instances where…

Agilent vacuum pumps, pumping systems, measurement instruments, components, and helium leak detectors allow you to create, measure, and maintain vacuum for your applications, processes, or research. Learn about Agilent's clean, dry, quiet IDP scroll pumps, high performance, high compression…

Agilent top-quality ICP-OES peristaltic pump tubing allows you to find the appropriate product to handle any matrix. Agilent has tubing in the diameters and material required for your application: PVC, Solvaflex, FPM, or Marprene. Standard PVC works for all aqueous with medium concentrated acids or…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Vapor generation provides the best performance for analysis of hydride forming elements such as As, Se, and Hg for ICP-OES. VGA 77 supplies such as tubing, gas-liquid seperators, absorption cells, reagents, and maintenance supplies provide the key consumables need to receive optimal performance…

A variety of empty reservoirs is available for packing custom SPE cartridges with bulk Bondesil or other desired sorbents. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies pump valve seal cap assembly can be used with all manual purge valves. Application: For All Manual Purge Valves, HPLC This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent cannula luer lock assembly is comprised of a bent cannula and a sampling syringe that are best used with the full flow filters. The sampling cannulas are available in two different lengths based on the volume of media being sampled from. This product is only available to U.S. Domestic…

The Agilent Technologies KBR window assembly is an ideal accessory to have in any chemical laboratories, research facilities, manufacturing industries and pharmaceutical factories. This product is only available to U.S. Domestic Customers. For research use only, not to be used in…

Dissolution baskets are cylindrical baskets that contain dosage forms and are placed at the end of the rotating shafts for dissolution apparatus 1 or reciprocating apparatus 7 holders. Agilent offers dissolution apparatus baskets that are constructed from non-reactive mesh to ensure accuracy of…

Nickel (Ni) skimmer cone used with x-lens for ICP-MS, standard cone with Agilent 7700x/e and 8800 ICP-MS,but also suitable for other 7700/8800 series ICP-MS, use with Ni sampling cone. Agilent Technologies products are intended for sale/shipment within the US only. International customers…