Agilent Technologies General Chromatography
-
Full Flow Filter
Agilent TechnologiesAgilent Full Flow Filters are made of either ultrahigh molecular weight polyethylene (UHMWPE) or the polyvinylidene fluoride (PVDF). These dissolution cannula filters are relatively inert and can be used for different sample matrices. PVDF cannula filters are available in those instances where…
-
PTFE Tubing
Agilent TechnologiesAgilent tubing and tubing assemblies are fully compatible with your PerkinElmer FIMS/FIAS systems, so you can be confident that they will integrate seamlessly with your PerkinElmer system. Application: Sample tubing, For FIMS-100, FIMS-400, FIAS-100, or FIAS-400, PerkinElmer This product is only…
-
SPE Cartridge Frit
Agilent TechnologiesThese frits are pre-cut to fit into Bond Elut reservoirs for use in filtration applications or for custom SPE sorbent packing. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Dissolution Paddle
Agilent TechnologiesIn paddle dissolution method, dissolution paddles are attached vertically at the end of a rotating shaft to release the active pharmaceutical ingredient from the dosage form inside the holding vessel. Agilent dissolution rotating paddles are compatible with both apparatus 2 and apparatus 5 methods.…
-
O-Ring Kit
Agilent TechnologiesBarrel nebulizers are used with earlier Agilent AA instruments with the Mark V/Mark VI atomization system. They are available in adjustable or Hi-vac versions. The Hi-vac nebulizer is used with aqueous solutions and can be set to either the high vacuum or the high solids setting. The high vacuum…
-
Contact Cylinder
Agilent TechnologiesThe Agilent Technologies modified contact cylinder is a perfect accessory for any THGA graphite furnace systems. Application: For THGA Graphite Furnace Systems This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Tee Assembly
Agilent TechnologiesThe Agilent Technologies tee assembly is an ideal accessory to have in any chemical laboratories, research facilities, manufacturing industries and pharmaceutical factories. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Tubing Kit
Agilent TechnologiesTubing kit for VGA 77. Includes silastic tubing for gas supply to reaction coil and gas-liquid separator, 2 x barb connectors for 3/32 inch ID tubing, 3m length of PVC tubing for gas inlet to VGA, sample and reagent uptake tubing for hydride module and 4 connectors to join the inlet sample…
-
Reciprocating DisSolution Screen
Agilent TechnologiesSeveral reciprocating vessel screens are available for the Agilent BIO-DIS reciprocating cylinder apparatus, which is ideal for automatic dissolution testing of dosage forms that require different types of media. This product is only available to U.S. Domestic Customers. For research use…
-
Complete Cell & Windows
Agilent TechnologiesThe Agilent Technologies complete cell and window is compatible to use with cells and Hg lamps in any PerkinElmer instruments. Application: For FIMS-100/400, PerkinElmer FIMS/FIAS This product is only available to U.S. Domestic Customers. For research use only, not to be used in…
-
Agilent Solid Phase Microextraction Fiber
Agilent TechnologiesSolid phase microextraction (SPME) is a technique for extracting analytes from solid, liquid, or gaseous samples by adsorbing them onto the SPME fiber and then desorbing them into an inlet, either on a gas chromatograph (GC) or an HPLC system. SPME is amenable to automation using an autosampler or…
-
Captiva Syringe Filter
Agilent TechnologiesCaptiva syringe filters offer the industry's highest flow rates and loading capacities. Using Captiva syringe filters also significantly extends column lifetime. Choose from a variety of membrane types and pore sizes to prepare small-volume samples for High-Performance Liquid Chromatography (HPLC)…
-
Venturi Extraction Tool
Agilent TechnologiesSpray chamber tools enable the user to complete routine maintenance on the Mark 7 spray chamber. Maintenance is easy. Special spray chamber tools are required, to remove the nebulizer components which are integrated into the nebulizer block. Application: Nebulizer Venturi Removal & Replacement …
-
Agilent Adapter Cap
Agilent TechnologiesBond Elut adapters fit on top of any Bond Elut cartridge and contain a female Luer fitting that accommodates the tip of another cartridge. ASPEC adapter caps produce a positive pressure seal with the needle in the Gilson ASPEC, ASPEC XL and ASPEC XL4 solid phase extraction systems. This product…
-
Burner System Drain Tubing
Agilent TechnologiesAgilent O-rings and supplies for PerkinElmer PinAAcle/Aanalyst flame atomic absorption systems are equivalent to genuine supplies for PerkinElmer PinAAcle/Aanalyst AA systems. You can be confident that these supplies will integrate seamlessly with your PerkinElmer instrument. Application: Spray…
-
High Intensity UltrAA Single Element Lamps
Agilent TechnologiesUltrAA lamps are high-intensity, boosted discharge hollow cathode lamps. They use the standard lamp current, but apply an additional boost discharge within the lamp. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their…
-
O-Ring Kit
Agilent TechnologiesBarrel nebulizers are used with earlier Agilent AA instruments with the Mark V/Mark VI atomization system. They are available in adjustable or Hi-vac versions. The Hi-vac nebulizer is used with aqueous solutions and can be set to either the high vacuum or the high solids setting. The high vacuum…
-
Nickel (Ni) Skimmer Cone
Agilent TechnologiesNickel (Ni) skimmer cone used with x-lens for ICP-MS, standard cone with Agilent 7700x/e and 8800 ICP-MS,but also suitable for other 7700/8800 series ICP-MS, use with Ni sampling cone. Agilent Technologies products are intended for sale/shipment within the US only. International customers…
-
O-Ring Kit
Agilent TechnologiesBarrel nebulizers are used with earlier Agilent AA instruments with the Mark V/Mark VI atomization system. They are available in adjustable or Hi-vac versions. The Hi-vac nebulizer is used with aqueous solutions and can be set to either the high vacuum or the high solids setting. The high vacuum…
-
Collection rack, 16x100mm tubes, PPM-48
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Captiva Collection Plate Seal
Agilent TechnologiesCompletely seal the plates using Captiva Pierceable 96-well silicone covers. The silicone covers are specially designed for 96-well autoinjectors, providing easy piercing and removal. This seal positions the outlet tips at a specified distance inside each well, to prevent cross contamination of…
-
OMIX SCX Pipette Tips
Agilent TechnologiesBond Elut OMIX pipette tips reliably purify and enrich femtomole and picomole levels of peptides and proteins prior to MALDI-TOF or LC/MS/MS. This unique monolithic sorbent consistently delivers uniform flow and strong analyte-to-surface interactions. Bond Elut OMIX tips bind more peptides to…
-
DisSolution Basket
Agilent TechnologiesDissolution baskets are cylindrical baskets that contain dosage forms and are placed at the end of the rotating shafts for dissolution apparatus 1 or reciprocating apparatus 7 holders. Agilent offers dissolution apparatus baskets that are constructed from non-reactive mesh to ensure accuracy of…
-
Sample Rack
Agilent TechnologiesA number of different autosamplers have been used with Agilent AA, ICP-OES, MP-AES and ICP-MS instruments, depending on the specific model. This includes the Agilent SPS 4 used with current instruments, and the SPS 3 or ASX 500 Series used with earlier model instruments. Each model autosampler is…
-
Screw, nebulizer capillary adjuster, 1/p
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Bond Elut Empty SPE Cartridge with two frits
Agilent TechnologiesThese clean polypropylene reservoirs contain two 20 µm polyethylene frits pre-inserted, an ideal configuration for simple filtration. For custom sorbent packing, additional frits can be purchased separately. This product is only available to U.S. Domestic Customers. For research use only,…
-
RETURN PROBE, 2.75in(Bio-Dis)
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Captiva Syringe Filter
Agilent TechnologiesCaptiva syringe filters offer the industry's highest flow rates and loading capacities. Using Captiva syringe filters also significantly extends column lifetime. Choose from a variety of membrane types and pore sizes to prepare small-volume samples for High-Performance Liquid Chromatography (HPLC)…
-
Disintegration Basket Cover
Agilent TechnologiesAgilent provides basket covers for the 100 automated disintegration apparatus. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Rack Overlay
Agilent TechnologiesThe Agilent Technologies rack overlay is suitable for use with 60-position sample rack for ASX 500, SPS 3 and SPS 4 autosampler models. It helps to use 40 mm x 18 mm tubes in the rack. Application: For 60-Position Sample Rack For SPS 3 Autosampler, Allows 60 x 13 mm od Tubes to be Used in the…
-
Electrode Extractor Tool
Agilent TechnologiesThese graphite furnace tools are required to enable removal and replacement of the graphite electrodes or the graphite shroud. These tools are suitable for use with the Agilent GTA-96/97/100/110/120 graphite furnace AA systems. Application: For GTA 96/97/100/110/120, Graphite Furnace AAS, GFAA…
-
Full Flow Filter
Agilent TechnologiesAgilent Full Flow Filters are made of either ultrahigh molecular weight polyethylene (UHMWPE) or the polyvinylidene fluoride (PVDF). These dissolution cannula filters are relatively inert and can be used for different sample matrices. PVDF cannula filters are available in those instances where…