Agilent Technologies General Chromatography
-
Agilent Surface Plate
Agilent TechnologiesThe Agilent Technologies surface plate is useful for the analysis, diagnostics, calibration and monitoring of various chemical samples in laboratories and research facilities. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Collection rack, 12x32mm vials, PPM-48
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
High sens. sample intro kit, MP-AES 1/pk
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Mini Paddle
Agilent TechnologiesIn paddle dissolution method, dissolution paddles are attached vertically at the end of a rotating shaft to release the active pharmaceutical ingredient from the dosage form inside the holding vessel. Agilent dissolution rotating paddles are compatible with both apparatus 2 and apparatus 5 methods.…
-
FIAS Sampling Probe Assembly
Agilent TechnologiesThe Agilent sampling probe is equivalent to the PerkinElmer AA version and is suitable for use with PerkinElmer AS-90/90A/90plus/91/93plus/S10 Autosamplers. Application: For inOrganic Acids & Most Organic Solvents, Except NMP This product is only available to U.S. Domestic Customers. For…
-
96-WELL PLATE MANIFOLD, ACRYLIC
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Agilent Enhancer Cell Kit
Agilent TechnologiesThe Enhancer (immersion) Cell is a PTFE cell with adjustable volume and a retaining cap to eliminate air pockets trapped against the skin or artificial membrane that provide the diffusion barrier. This product is only available to U.S. Domestic Customers. For research use only, not to be…
-
Nebulizer Assembly
Agilent TechnologiesNebulizers are a critical part of the Flame AA sample introduction system. Agilent nebulizers for PerkinElmer AA instruments are designed to support a variety of samples and provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences. Application: For…
-
Tygon fuel tubing, 1/4 in id x 3/8 in od
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
FIAS Sampling Probe Assembly
Agilent TechnologiesThe Agilent sampling probe is equivalent to the PerkinElmer AA version and is suitable for use with PerkinElmer AS-90/90A/90plus/91/93plus/S10 Autosamplers. Application: For AS-90/90A/90Plus/91/93Plus/S10 Autosamplers This product is only available to U.S. Domestic Customers. For research…
-
6 USP FLUTED DISCS
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Agilent Adapter Cap
Agilent TechnologiesBond Elut adapters fit on top of any Bond Elut cartridge and contain a female Luer fitting that accommodates the tip of another cartridge. ASPEC adapter caps produce a positive pressure seal with the needle in the Gilson ASPEC, ASPEC XL and ASPEC XL4 solid phase extraction systems. This product…
-
O-Ring
Agilent TechnologiesA number of O-rings are used throughout the current Agilent Mark 7 flame atomization system, and the earlier Agilent Mark VI flame atomization system, including on nebulizer components, the spray chamber and the burner. Regular inspection of the O-rings is recommended, especially when completing…
-
Spring Holder
Agilent TechnologiesThe Agilent reciprocating holder apparatus 7 is ideal for automatic dissolution testing of dosage forms that require a change of media, a smaller volume, or more vigorous agitation. The Agilent 400-DS dissolution apparatus 7 enables of small-volume drug-release testing of medical devices such as…
-
Agilent TruCenter Vessel with Collar
Agilent TechnologiesTruAlign vessels for the 708-DS are serialized and have a collar incorporated on the vessel to maintain accurate centering, reproducible vessel orientation, and verticality alignment. TruCenter and EaseAlign vessels are available for legacy Agilent 705-DS, VK7000/10 and V-series dissolution…
-
Mixing Manifold
Agilent TechnologiesThe Agilent Technologies mixing manifold consists of two inlet and one outlet connection and ensures a smooth liquid flow. Application: For FIMS-100, FIMS-400, FIAS-100, FIAS-400 This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Bond Elut Empty SPE Cartridge with two frits
Agilent TechnologiesThese clean polypropylene reservoirs contain two 20 µm polyethylene frits pre-inserted, an ideal configuration for simple filtration. For custom sorbent packing, additional frits can be purchased separately. This product is only available to U.S. Domestic Customers. For research use only,…
-
General Laboratory Tools
Agilent TechnologiesThe General Laboratory Tool Kit (2714M23) includes the following items: Toolbox Flashlight 8 in. bastard file 6 in. adjustable wrench 12 in. adjustable wrench for use with regulator No. 1 pt, 3 in. Pozidriv shaft, fits no. 2-4 screws No. 2 pt, 4 in. Pozidriv shaft, fits no. 5-10 screws …
-
Tubing & Connector Kit
Agilent TechnologiesThe Agilent fully automated modular VGA 77 vapor generation accessory is used with Agilent flame AA systems to. enables rapid trace level determinations of mercury and other hydride-forming elements at parts-per-billion (µg/L) concentrations using the vapor or hydride generation technique. The VGA…
-
DisSolution Basket
Agilent TechnologiesDissolution baskets are cylindrical baskets that contain dosage forms and are placed at the end of the rotating shafts for dissolution apparatus 1 or reciprocating apparatus 7 holders. Agilent offers dissolution apparatus baskets that are constructed from non-reactive mesh to ensure accuracy of…
-
Agilent Ni sampling cone for x-lens, ICP-MS, 1/p - 58
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
TruAlign Vessel
Agilent TechnologiesDissolution vessels are used to hold dissolution media during drug release. Agilent provides a variety of dissolution vessels for use with Agilent dissolution apparatus. Selected verified vessels are available containing a Certificate of Conformance (COC). TruAlign vessels for the 708-DS are…
-
Agilent Luer Stopcock
Agilent TechnologiesThe Agilent Technologies luer stopcock is made from strong and sturdy metal that offers good corrosion resistance thus enhancing the durability. This fitting provides a secure connection forming a leak-proof seal. This product is only available to U.S. Domestic Customers. For research use…
-
Capillary and Fittings Kits
Agilent TechnologiesAgilent starter kits contain the most often used capillaries and fittings. We included our genuine flexible stainless steel capillaries to make the best connection in your LC system, no matter the brand. The kits are for use with 3-4 or 1-2 mm ID columns, as well as for Micro LC columns. The free…
-
MPAES s/chamber encapsulated for IsoMist
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Vac Elut 12 Manifold with Collection Rack
Agilent TechnologiesThe corrosion-resistant VacElut cartridge manifolds allow simultaneous processing of multiple Bond Elut cartridges. The clear glass base allows observation of the entire sample collection process. Its compact, linear design requires little bench space. Application: For 16 x 100 mm Test Tubes …
-
Mini Paddle
Agilent TechnologiesIn paddle dissolution method, dissolution paddles are attached vertically at the end of a rotating shaft to release the active pharmaceutical ingredient from the dosage form inside the holding vessel. Agilent dissolution rotating paddles are compatible with both apparatus 2 and apparatus 5 methods.…
-
Agilent Elastic Lid Fastener
Agilent TechnologiesThe Vac Elut SPS 24 manifold allows you to process up to 24 SPE cartridges simultaneously. Like all Vac Elut manifolds, the SPS 24 is made from durable, solvent-resistant materials and engineered to last. The glass sides allow easy viewing of the entire sample collection process. This product is…
-
Reciprocating DisSolution Screen
Agilent TechnologiesSeveral reciprocating vessel screens are available for the Agilent BIO-DIS reciprocating cylinder apparatus, which is ideal for automatic dissolution testing of dosage forms that require different types of media. This product is only available to U.S. Domestic Customers. For research use…
-
Fluorescence Microplate
Agilent TechnologiesAgilent 96- and 384-well high binding microplates have high binding surfaces that bind medium and large biomolecules (greater than 10 kDa) that have hydrophobic and/or ionic groups. These microplates are recommended for the Cary Eclipse Fluorescence Microplate Reader Accessory. They are available…
-
Sample Loop
Agilent TechnologiesAgilent sample loops are fully compatible with your PerkinElmer FIMS/FIAS systems, so you can be confident that they will integrate seamlessly with your PerkinElmer system. Application: For PerkinElmer FIMS/FIAS FIMS-100, FIMS-400, FIAS-100, or FIAS-400 This product is only available to U.S.…
-
Bond Elut Top Well Plate Tube
Agilent TechnologiesAgilent TOP-DNA removes interfering salts, incomplete synthesis products, and other impurities from synthetic DNA oligonucleotides in a few simple steps. TOP-DNA purifies oligonucleotides of up to 150-mer in length and from 200 nmol to 1 µmol. It can also be used for sample preparation before HPLC…
![Site Search powered by SLI Systems](http://assets.resultspage.com/logos/sli_logo_2014.png)