Ace Glass Laboratory Funnels
-
Threaded stopcock with PTFE plug permits smooth needle valve adjustment down to 0.1cc/min. flow rate. Double PTFE ring seals prevent exposure of backup O-Ring to corrosive liquids. Angled position makes manipulation of stopcock easier than conventional style. 24/40 joints top and bottom, double…
-
Funnel, Filter, Buchner
Ace GlassBuchner filter funnel featuring a standard taper, drip-tip bottom joint and a vacuum source hose connection. Available in various sizes and porosities.,/p>
-
Funnel, Powder
Ace GlassUseful in pouring powders or liquids into ground joint containers. Available with standard taper or spherical inner joint. Funnels without joints listed under 7242.
-
Funnel, Pressure Equalizing, Graduated
Ace GlassCylindrical wtih standard taper joint top and bottom, drip stem, pressure equalizing arm and double scale graduations, calibrated from stopcock. Drip stem does not extend beyond joint, thereby eliminating possible source of breakage. Stop cock availabl
-
Funnel, Powder Dispensing
Ace GlassSide operated screw feed instrument for addition of powders and solids, up to 25 mesh, to reactions without problems of seizing or binding. Features a flexible PTFE screw thread wrapped on a precision PTFE-ceramic shaft and contained within a precision
-
Funnel, Powder, Angled, Heavy Wall Glass
Ace GlassHeavy wall glass powder funnel. Angled to fit in multi-neck flasks and reactor heads. Standard taper inner bottom joint.
-
Funnel, Filter, Buchner
Ace GlassWith ACE fritted disc. Porosities A, B, C and D are priced the same.
-
Funnel, Separatory, Removable PTFE Tip
Ace GlassSeparatory funnels, from 125ml to 5 liter. These funnels feature a detachable PTFE drip tip which is not easy to break and is easier to keep clean. Ace-thred tip makes a leak tight connection without the need for an o-ring. Complete unit consists of th
-
Funnel, Filter, 14/20
Ace GlassDiameter of sintered glass filter disc is 18mm. Measures 40mm from disc to bottom of joint. All porosities of a given size are priced the same. Volume approximately 10 mL. Hose connection is size A.
-
With straight, open top and a 2mm bore 1:5 taper PTFE stopcock plug. Porosity A frit, 145-174 micron.
-
Jacketed version of 7297 series addition funnels. Jacket runs from shoulder at top of vessel to above the PTFE stopcock. Has size D hose barbs for 3/8in ID tubing. Pressure equalizing arm runs from top of vessel to just below the PTFE stopcock. Graduat
-
Funnel, Pressure, Equalizing
Ace GlassCylindrical with standard taper joint top and bottom and drip stem. Stopcock has glass plug. Drip stem does not extend beyond joint, thereby eliminating possible source of breakage. For same funnel with 1:5 PTFE plug, see 9491.
-
Funnel, Powder, Flat Side
Ace GlassPowder funnel with standard taper joint and one flattened side for easy of use with multi-neck flasks.
-
Funnel, Powder Dispensing, Vertical
Ace GlassA vertical, compact screw feed instrument for addition of powders and solids, up to 25 mesh, to reactions without seizing or binding. Features a flexible PTFE screw thread wrapped on a precision PTFE-ceramic shaft and contained within a precision bore
-
-
Funnel, Pressure Equalizing
Ace GlassCylindrical with 24/40 standard taper joints top and bottom and drip stem. Stopcock has 1:5 PTFE plug. Drip stem does not extend beyond joint, thereby eliminating possible source of breakage. For same funnel with glass plug, see 7291.
-
Addition-Storage Funnel
Ace GlassPermits solutions to be prepared with No. 13654-24 Stirring Magnet and added portion wise. The T-bore stopcock in the equalizing arm permits isolation of the contents for storage. Capacity, 100 or 250mL. Lower threaded stopcock is all PTFE. Outer joint is standard taper 14/20 or 24/25, inner joint…
-
European style funnel with new leak-tight, locking stopper that will not fall out during shaking or transportation. Outer ground joint at top is a Rodaviss joint. Stopper can be secured in top joint via cap and O-ring for a positive, leak-tight seal; n
-
Funnel, Separatory, PTFE Plug
Ace GlassSeparatory funnel features a PTFE stopcock and a standard taper joint with drip tip. Stopper is not included.
-
Funnel, Separatory, Squibb, Pear-Shaped
Ace GlassSeparatory funnel featuring a glass stopcock and a PTFE stopper included. See Ace family 12632 for extra stoppers.
-
Funnel, Pressure, Equalizing
Ace GlassCylindrical with standard taper joint top and bottom and drip stem. Stopcock has 1:5 PTFE plug. Drip stem does not extend beyond joint, thereby eliminating possible source of breakage. For same funnel with glass plug, see 9490.
-
Funnel, Pressure Equalizing
Ace GlassCylindrical with standard taper joint top and bottom and drip stem. Stopcock has glass plug. Drip stem does not extend beyond joint, age. Stopcock available with glass plug or 1:5 PTFE plug. thereby eliminating possible source of breakage. For same fun
-
Funnel, Powder Dispensing
Ace GlassSide operated screw feed instrument for addition of powders and solids, up to 25 mesh, to reactions without problems of seizing or binding. Features a flexible PTFE screw thread wrapped on a precision PTFE-ceramic shaft and contained within a precision
-
Similar to 9495, except lower stopcock is solid 1:5 PTFE metering valve, side arm plug is regular 1:5 solid PTFE. For replacement plugs, see 8232 or 8224.
-
With standard taper stopper joint. Stopcock available 1:5 PTFE plug. Stopper size is standard taper 24/40. For replacement stopcock plugs, see 8224. For stoppers, order 8250-12. Stopper NOT supplied.
-
Funnel, Addition, Pilot Size, Ace-Thred
Ace GlassLarge separatory funnel for use where large volumes are needed. Cylindrical shape necks down to a #25 Ace-Thred and connects to an 8mm bore PTFE-clad glass stopcock via a PTFE coupling using FETFE O-Rings. The system is completely grease-free. Complete
-
Funnel, Separatory, Globe
Ace GlassGlobe style separatory funnel featuring a 175mm stem below the PTFE stopcock and supplied with a flask length top stopper.
-
Distilling Head, Magnetic
Ace GlassMagnetically operated swinging funnel type, with iron slug totally enclosed.This head maintains reflux ratio constant with changing throughput. The vapor bypass is designed to give accurate thermometer readings. Tapered bulb condenser increases capacity without choking. Side arm joint is…
-
Funnel, Addition, Graduated
Ace GlassCylindrical with joint at top and bottom, drip stem, and double scale graduations, calibrated from stopcock. Drip stem does not extend beyond the joint, thereby eliminating a possible source of breakage. PTFE stopcock plug.
-
Funnel, Pressure, Equalizing, Graduated
Ace GlassPressure equalizing, addition funnel featuring standard taper joints, protected drip-tip, equalizing arm and double scale graduations calibrated from the stopcock. Available PTFE stopcock styles are standard, metering or needle valve. Top stopper is not included.
-
Separatory funnel featuring a PTFE stopcock and a PTFE stopper included. See Ace family 12632 for extra stoppers.
-
Funnel, Addition, with Jacket
Ace GlassDouble scale graduated funnel with jacket for cooling with dry ice. Calibrated from stopcock. With 1:5 PTFE stopcock plug; for extra plugs, see 8224. For stoppers, order 8250-12.