Polar endcapped C18 phase Alternative selectively compared to conventional C18 phases Compatible with 100% aqueous mobile phases Thermo Scientific Aquasil C18 HPLC Columns provide greater retention than C18 for polar molecules.

Separate cationic molecules with powerful adjustable selectivity control using Thermo Scientific™ Acclaim™ Mixed-Mode WCX-1 LC columns. The silica-based stationary phase features a hydrophobic alkyl chain with a carboxyl terminus that provides both hydrophobic reversed-phase and weak…

Accucore PFP columns offer alternative selectivity to C18, particularly for halogenated analytes. Based on Core Enhanced Technology, Accucore columns provide fast, high-resolution separations - without the elevated backpressures required by sub-2µm particles. Fast separations with…

Highly deactivated and produced to exacting tolerances to ensure a high degree of reproducibility

Easy-to-use format eliminates contamination Pure gas output 99.9999% or 6.0 grade No carrier gas line contamination during filter change Easy and fast replacement without the need for tools No risk of overtightening fittings Reuseable end fittings reduce cost of clean gas:…

Acidic functionality in the polymer structure allows analysis of acidic compounds without derivatization Polar phase, acid-deactivated polyethylene glycol Resists oxidative damage and adsorption of acids Excellent peak shapes for high MW acids Equivalent to USP G25, G35 phases …

Super Clean Cartridge Filters 99.9999% pure gas (or 6.0 grade) output No carrier gas line contamination during cartridge change Cost effective TUEV approved Max. pressure 11 bar (160 psi) Max. flow 7L/min.

The most widely used MS phase in gas chromatography Low polarity phase, 5% diphenyl/95% dimethyl polysiloxane Low bleed for excellent signal-to-noise ratio, sensitivity and mass spectral integrity Exceptional inertness ideal for analysis of active compounds Equivalent to USP G27…

Accucore PFP Defender Guard Cartridges offer easy, economical protection of the main column with minimized impact on retention or efficiency. Based on Core Enhanced Technology, Thermo Scientific Accucore columns provide fast, high-resolution separations - without the elevated backpressures required…

Ligand on 100 Angstrom silica Thermo Scientific Betasil C18 Columns feature high surface area with high bonded phase coverage.

Siltek coating provides a surface with exceptional inertness suitable for the analysis of highly active compounds Precision machined tp provide exceptional sealing properties Reduces activity (especially useful for analysis of pesticides, PCB's, phenols, etc.) High grade stainless steel…

Accucore C18 columns offer optimum retention for non-polar compounds and separation of a broad range of analytes. Based on Core Enhanced Technology, Accucore columns provide fast, high-resolution separations – without the elevated backpressures required by sub-2µm particles. Fast…

Offers 90+% resolution of the first six gases in EPA Method 8260 and EPA Method 524.2 for volatile organics analysis Low to mid-polarity phase, 6% cyanopropylphenyl/94% dimethyl polysiloxane Ideal for EPA methods 624 and 608 Allows resolution of 2-nitropropane from 1,1-dichloropropanone…

For the separation of certain aromatic compounds and moderately polar compounds Retention characteristics similar to Hypersil MOS Alternative selectivity to C8 Thermo Scientific Hypersil Phenyl Columns are reversed phase materials…

Extra retention and selectivity for halogenenated compounds Excellent for taxane analysis Thermo Scientific Fluophase PFP HPLC Columns feature perfluorinated phases for unique selectivity.

Accucore PhenylHexyl columns offer unique selectivity for aromatic and moderately polar analytes. Based on Core Enhanced Technology, Accucore columns provide fast, high-resolution separations - without the elevated backpressures required by sub-2µm particles. Fast separations with…

Optimize conventional HPLC methods with Thermo Scientific™ Accucore™ XL C18 LC Columns. Rugged 4µm solid-core particles ensure very high efficiencies within standard HPLC pressure limits. The high bonded phase coverage provides optimal retention of a broad range of nonpolar…

Highly characterized, tested and validated C18 columns Thermo Scientific HyPURITY C18 Columns are high quality, highly pure silica columns.

Rapidly analyze polyaromatic hydrocarbons (PAHs) with Thermo Scientific™ Hypersil™ green PAH LC columns. Featuring specially tailored alkyl-bonded silica with high carbon loading, these short, fast columns can analyze 16 PAHs in four minutes. Optimized for EPA Method 610: Polynuclear Aromatic…

High quality, base deactivated columns Unique selectivity for aromatic and slightly polar compounds Manufactured under ISO 9001:2000 conditions Thermo Scientific Hypersil BDS 5µm Phenyl Columns offer exceptional stability and…

Verify optimum selectivity of Thermo Scientific* Accucore HPLC columns over a wide range. Based on Core Enhanced Technology, Accucore columns provide fast, high-resolution separations - without the elevated backpressures required by sub-2µm particles. Fast separations with excellent…

Offer 100% porous graphitic carbon for extended separation capabilities with Thermo Scientific™ Hypercarb™ Porous Graphitic Carbon LC Columns. Enhanced retention of polar compounds and separtion of structurally related analytes with stability at pH extremes and high temperature. …

For a high-quality, base-deactivated, fully endcapped phase with similar selectivity to C18 but slightly less retention, use Thermo Scientific™ Hypersil™ BDS C8 HPLC Columns. These economical columns feature reduced silanol activity and provide exceptional reliability for QA/QC labs.…

Choose Thermo Scientific™ Hypersil™ ODS C18 HPLC Columns for a general purpose C18 phase to use in a broad range of applications. Hypersil stationary phases are recognized as an industry standard in HPLC. Proven as an effective analytical tool, the classical Hypersil phases are well established and…

More rapid mobile phase equilibration compared with silica in normal phase Not deactivated by traces of water in normal phase One of the least retentive of reversed phase materials and, therefore, useful to separate polar compounds …

Wide range of choices for a wide range of instruments and applications Thermo Scientific ferrules are available in three different materials and various dimensions to match the instrument and capillary column ID. The choice of material is dependent upon the use. 15% Graphite/85% Vespel…

A short alkyl chain reversed phase material Selectivity for polar and multifunctional compounds Can be used in ion-pair separations Thermo Scientific Hypersil SAS C1 Columns have a short alkyl chain solid phase, which makes…

Columns designed to produce reliable, reproducible results for HPLC and UHPLC applications. Products operate in a variety of phases and are available with a range of stationary phases and column dimensions. Includes analytical, guard, trap, and preparative columns. Solve your chromatography…

The use of SPE sample preparation can significantly enhance the robustness and reliability of many biological, pharmaceutical, forensic and environmental applications. Thermo Scientific™ HyperSep™ Florisil Cartridges are ideal for the isolation of polar compounds from nonpolar…

Improve the separation efficiency in your reversed-phase applications with Thermo Scientific™ Acclaim™ 120 C18 columns. These columns feature an ultrapure silica substrate with extremely low metal content to minimize tailing effects and deliver symmetrical peak shapes. The unique…

In reversed phase mode, Hypersil APS-2 columns are excellent for carbohydrate analysis: extra sensitivity for sugars Alternative selectivity to silica when used in normal phase Thermo Scientific Hypersil APS-2 Columns have a versatile amino propyl…

One-time installation procedure Can be configured to the individual user requirements Needle valves ensure gas line is not contaminated during cartridge change NOTE: Filters are not included.