Metal caps offer the widest range of temperature tolerances and are very resistant to fracture from impact. Metal caps are great for industrial and food applications. A metal closure is manufactured from either steel (coated with anti-corrosive coating of either chromeplate or tinplate) or…

Phenolic Hole Caps are known for providing the widest range of chemical compatibility and for being the most temperature tolerant of plastic closures. They also provide the most consistent adherence to close dimensional tolerances. Ideal for pharmaceutical applications. Thermoset or Phenolic…

Metal caps offer the widest range of temperature tolerances and are very resistant to fracture from impact. Metal caps are great for industrial and food applications. A metal closure is manufactured from either steel (coated with anti-corrosive coating of either chromeplate or tinplate) or…

For pharmaceuticals, specialty chemicals and food ingredients, this jar lid protects your valuable products from moisture, from contamination, and against tampering, ensuring your hazardous solids arrive safely at their destination. The quarter-turn screw lid closure reduces handling time.

Black Phenolic Rubber Lined Caps are autoclavable. The Liner is compliant with FDA 21 CFR 177.2600 Rubber Articles Intended for Repeated Use. The liner exhibit good resiliency and resistance to moisture vapor. The closures provide consistent adherence to close dimensional tolerance.

Phenolic Hole Caps are known for providing the widest range of chemical compatibility and for being the most temperature tolerant of plastic closures. They also provide the most consistent adherence to close dimensional tolerances. Ideal for pharmaceutical applications. Septa sold separately.

Black Phenolic F217 & PTFE Lined Caps are known for providing the widest range of chemical compatibility. Foam backed PTFE liners resist attack from virtually all chemicals at room temperature and provides resilience for a tight seal with a low moisture transmission rate. F217 has a low density…

Polypropylene Hole Caps are known for good impact strength, cost effectiveness, and pliability. Septa sold separately.

Phenolic Pulp/Vinyl Lined Caps are perfect for general use. The liner is made of a vinyl coating applied to high density polyethylene coated paper and then it is laminated to pulpboard. This general purpose liner is commonly used for food, beverage, medical and chemical applications packed at less…

This tap makes it quick and easy to pour liquids from one container to another. Easy-action lever tap Works well with Cubitainers® and vented rigid containers Features an excellent flow rate of 72 ml/sec up to 155 ml/sec. Typical markets include beverage, liquid food, household,…

Lug Lid with clear epoxy rust inhibitor lining fits 5 gallon steel pails and is plain with no fittings.

White Polypropylene (PP) Trigger Sprayer Pumps dispense liquid from a nozzle that allows the user to adjust spray pattern from jet stream to spray to fine mist. 

For pharmaceuticals, specialty chemicals and food ingredients, this jar lid protects your valuable products from moisture, from contamination, and against tampering, ensuring your hazardous solids arrive safely at their destination. The quarter-turn screw lid closure reduces handling time.

PP SturdeeSeal® PE Foam Lined Caps are known for good impact strength, cost effectiveness, and pliability. These polypropylene closures with foamed polyethylene liners have excellent sealing characteristics and offer good chemical resistance including acids, alcohols, alkalis, aqueous products,…

Dropper Assemblies feature a glass tube with black polypropylene closure and rubber squeeze bulb. Tip opening has a 3.0mm outside diameter.

White Unlined Polypropylene Caps are known for good impact strength, cost effectiveness, and pliability. Unlined polypropylene closures are also available in black. These caps are autoclavable and are suitable for many dry products.

Green Thermoset Plastic Caps with F-217 PTFE Liners are known for providing the widest range of chemical compatibility and for being the most temperature tolerant of plastic closures. The color green easily identifies the PTFE liner system. F-217 foam-backed PTFE liners resist attack from virtually…

White Polypropylene Hole Caps with bonded PTFE/Silicone Septa provide assurance that the septa will not slip away from the cap while injecting. The PTFE/Silicone septa has excellent resealing and chemical resistant properties.

Black Phenolic Polyseal™ Cone Lined Caps form an exceptionally tight seal and offer a good chemical barrier. This liner molds itself around the sealing areas of the finish as the cap is screwed on, virtually eliminating leakage, evaporation, contamination, binding, and backing off.

Black Phenolic F217 & PTFE Lined Caps are known for providing the widest range of chemical compatibility and for being the most temperature tolerant of plastic closures. Foam backed PTFE liners resist attack from virtually all chemicals at room temperature and provides resilience for a tight…

PolyCone Lined Phenolic Caps form an exceptionally tight seal and offer a good chemical barrier. This liner molds itself around the sealing areas of the finish as the cap is screwed on, virtually eliminating leakage, evaporation, contamination, binding and backing off. Great for everything from…

Black Phenolic Rubber Lined Caps are autoclavable. The Liner is compliant with FDA 21 CFR 177.2600 Rubber Articles Intended for Repeated Use. The liner exhibit good resiliency and resistance to moisture vapor. The closures provide consistent adherence to close dimensional tolerance.

Black Phenolic Caps with Pulp/Aluminum Foil Liners are free of odor and taste problems, and are appropriate for non-acid, non-alkaline products. Typically used for food applications, these aluminum foil-lined plastic caps can also be used for such products as organic solvents, chrome cleaners,…

PolyCone Lined Phenolic Caps form an exceptionally tight seal and offer a good chemical barrier. This liner molds itself around the sealing areas of the finish as the cap is screwed on, virtually eliminating leakage, evaporation, contamination, binding and backing off. Great for everything from…

Unlined polypropylene caps manufactured by qorpak offer good impact strength, cost effectiveness and pliability. these caps are autoclavable and are suitable for many dry products.

PTFE Discs are made of 0.010" solid virgin PTFE. They can be manually inserted into closures of appropriate size. Often used for environmental sampling. Convert ordinary caps into non-contaminating closures at a fraction of the cost. Just press the disc into your existing closure. Easy-to-clean.…

Trigger Sprayer Pumps are available foam PE lined or linerless Industrial Sprayers.

Dropper Assemblies feature a glass tube with black polypropylene closure and rubber squeeze bulb. The opening of tube tip has a 3.0mm outside diameter. These dropper caps are available in multiple sizes with dropper tubes in multiple lengths.

Flip Top Caps are ideal on the workbench for dispensing small amounts of liquid. They are made of durable polypropylene and are unlined. Orifice is 3.0mm.

LDPE (low density polyethylene) plastic Yorker Caps come with replaceable LDPE Red Sealing Tips to keep bottle contents inside when not in use. These Yorker Caps w/ Red Tips are ideal for dispensing small amounts of liquid or gels such as condiments, syrups, glues, and more from squeezable and…

Metal caps are very resistant to fracture from impact, and are great for industrial and food applications. Plastisol Lined Metal Caps and lids offer excellent resistance to mild acids as in food products, and are generally used on glass bottles and jars.

Acid Caps are polypropylene caps that are acid resistant. This F422 liner is comprised of a .38" LDPE core sandwiched between identical layers of .002" - .003" virgin HDPE.