Stainless Steel, 8 inch, Full Height Sieves Diameter: 8 inches; height: 2 inches 8326S06 and S11 Sieves provided with a 28 mesh, stainless steel support screen soldered directly below the cloth for longer cloth life. Cover and receiver 8323S50 and S60, not included with sieves, fit all…

The Newark Wire 8 Inch Dia half test sieve with a #80 nominal opening consists of a 180 um stainless steel mesh and features a clean, sanitary construction to maintain hygiene. The sieve has a die-stamped design that shows the uniformity and functionality from sieve to sieve. The frame of the sieve…

Stainless steel, 8-inch, full height sieves, solder-free ASTM Specification E-11 Heavy-duty construction Polished frame inside and out Withstands autoclaving temperatures Rugged sieve withstands most laboratory cleaning agents, such as CIP100, Duofoam and isopropyl alcohol. Sieve has no ink…

The Newark Wire 8 Inch Dia half test sieve with a #35 nominal opening consists of a 500 um stainless steel mesh and features a clean, sanitary construction to maintain hygiene. The sieve has a die-stamped design that shows the uniformity and functionality from sieve to sieve. The frame of the sieve…

The Newark Wire 8 Inch Dia half test sieve with a #8 nominal opening consists of a 2.36 mm stainless steel mesh and features a clean, sanitary construction to maintain hygiene. The sieve has a die-stamped design that shows the uniformity and functionality from sieve to sieve. The frame of the sieve…

The Newark Wire 3 Inch Dia test sieve with a #60 nominal opening consists of a 250 um stainless steel mesh and features a clean, sanitary construction to maintain hygiene. The sieve has a die-stamped design that shows the uniformity and functionality from sieve to sieve. The frame of the sieve is…

The Newark Wire 8 Inch Dia half test sieve with a #25 nominal opening consists of a 710 um stainless steel mesh and features a clean, sanitary construction to maintain hygiene. The sieve has a die-stamped design that shows the uniformity and functionality from sieve to sieve. The frame of the sieve…

The Newark Wire 8 Inch Dia half test sieve with a #45 nominal opening consists of a 355 um stainless steel mesh and features a clean, sanitary construction to maintain hygiene. The sieve has a die-stamped design that shows the uniformity and functionality from sieve to sieve. The frame of the sieve…

The Newark Wire 8 Inch Dia half test sieve with a #400 nominal opening consists of a 38 um stainless steel mesh and features a clean, sanitary construction to maintain hygiene. The sieve has a die-stamped design that shows the uniformity and functionality from sieve to sieve. The frame of the sieve…

The Newark Wire 3 Inch Dia test sieve with a #500 nominal opening consists of a 25 um stainless steel mesh and features a clean, sanitary construction to maintain hygiene. The sieve has a die-stamped design that shows the uniformity and functionality from sieve to sieve. The frame of the sieve is…

Stainless steel , 3-inch sieves Stainless steel frame /stainless steel cloth Overall height - full height 1 3/4” Depth to cloth - full height 1 1/4” Each test sieve is supplied with a serial number, establishing assurance of traceability.

The Newark Wire 8 Inch Dia half test sieve with a #30 nominal opening consists of a 600 um stainless steel mesh and features a clean, sanitary construction to maintain hygiene. The sieve has a die-stamped design that shows the uniformity and functionality from sieve to sieve. The frame of the sieve…

The Newark Wire 8 Inch Dia half test sieve with a 25 um nominal opening consists of a 500 mm x 500 mm stainless steel mesh and features a clean, sanitary construction to maintain hygiene. The sieve has a die-stamped design that shows the uniformity and functionality from sieve to sieve. The frame…

All sieves marked with U.S. designated number and opening in inches as well as in millimeters Meet ASTM Standard E 11; comply with NBS, ANS and ASA standards Listed by “Alternate” and “Standard” U.S. Series designations; see accompanying table for other…

The Newark Wire 8 Inch Dia full test sieve with a 104 um nominal opening consists of a 150 mm x 150 mm stainless steel mesh and features a clean, sanitary construction to maintain hygiene. The sieve has a die-stamped design that shows the uniformity and functionality from sieve to sieve. The frame…

The Newark Wire 8 Inch Dia full test sieve with a 20 um nominal opening consists of a 635 mm x 635 mm stainless steel mesh and features a clean, sanitary construction to maintain hygiene. The sieve has a die-stamped design that shows the uniformity and functionality from sieve to sieve. The frame…

Stainless Steel, 8 inch Half-Height As described in general copy preceding 8323E53 Diameter: 8”; height: 1” 8323Q81 and Q87 Sieves provided with a 28 mesh, stainless steel support screen soldered directly below the cloth for longer cloth life. Cover and receiver 8323Q90…

The Newark Wire 8 Inch Dia half test sieve with a 520 um nominal opening consists of a 30 mm x 30 mm stainless steel mesh and features a clean, sanitary construction to maintain hygiene. The sieve has a die-stamped design that shows the uniformity and functionality from sieve to sieve. The frame of…

For cleaning coarse mesh (80 mesh and coarser) sieves. For use with stainless steel or brass wire cloth. Bristles are made of brass: all other components are wood. Dimensions: 1 1/8 x 1 1/2 x 3” head with a 3/4” diameter x 5 1/2” long dowel handle. Overall length is 7”.…

The Newark Wire 8 Inch Dia full test sieve with a 37 um nominal opening consists of a 400 mm x 400 mm stainless steel mesh and features a clean, sanitary construction to maintain hygiene. The sieve has a die-stamped design that shows the uniformity and functionality from sieve to sieve. The frame…

The Newark Wire 8 Inch Dia half test sieve with a #100 nominal opening consists of a 150 um stainless steel mesh and features a clean, sanitary construction to maintain hygiene. The sieve has a die-stamped design that shows the uniformity and functionality from sieve to sieve. The frame of the…

Stainless steel, 6-inch, full height Stainless steel frame and stainless steel cloth 6” diameter

Diameter: 3", height: 1.75" Cover and receiver 8323T90 and T95, not included with sieves, fit all sieve sizes in this series.

The Newark Wire 8 Inch Dia half test sieve with a #40 nominal opening consists of a 425 um stainless steel mesh and features a clean, sanitary construction to maintain hygiene. The sieve has a die-stamped design that shows the uniformity and functionality from sieve to sieve. The frame of the sieve…

The Newark Wire 3 Inch Dia half test sieve with a #20 nominal opening consists of a 850 um stainless steel mesh and features a clean, sanitary construction to maintain hygiene. The sieve has a die-stamped design that shows the uniformity and functionality from sieve to sieve. The frame of the sieve…

The Newark Wire 8 Inch Dia half test sieve with a #325 nominal opening consists of a 45 um stainless steel mesh and features a clean, sanitary construction to maintain hygiene. The sieve has a die-stamped design that shows the uniformity and functionality from sieve to sieve. The frame of the sieve…

The Newark Wire 8 Inch Dia half test sieve with a #200 nominal opening consists of a 75 um stainless steel mesh and features a clean, sanitary construction to maintain hygiene. The sieve has a die-stamped design that shows the uniformity and functionality from sieve to sieve. The frame of the sieve…

For cleaning all grades (from coarse to fine) of wire cloth used in testing sieves, but especially suited for cleaning fine mesh (100 mesh and finer) sieves. Nylon bristles will not damage the wire cloth. Can be used with either stainless steel or brass wire cloth. Bristles are made of black nylon;…